Hi
I have an Asus M2N32 WS Pro, 4G Ram, AthlonX264 4600+.
I Installed SuSE 10.3 (64bit) on Dom0, LVM on Raid 5.
All domU''s boot off LVM, using same Suse 10.3.
I have a firewall (fw) domU running shorewall and a
domU name-dhcp-server (nds). Somewhere in between 10
and 16 hours the network stalls. In dns, I can see
dhcp queries and offers, but these never make it to
the clients in the lan. if I try pinging the domU''s I
just get no reply at all. If I shutdown and boot the
domU''s again everything runs again.
I considered running "ethtool -K eth0 tx off" on one,
all domU''s without success. First I had delegated one
of the on board nics (mcp55, forcedeth) from dom0 and
forwarded to domU fw. That gave some mm.c
errormessages. Thus I now have a pci USB contrioller
with attached NIC delegated from dom0 to domU fw.
Here are the configs for fw
Linux fw 2.6.22.13-0.3-xen #1 SMP 2007/11/19 15:02:58
UTC x86_64 x86_64 x86_64 GNU/Linux
===================================================name = "fw"
kernel = "/boot/vmlinuz-xen"
ramdisk = "/boot/initrd-xen"
memory = 128
vif = [ ''mac=aa:cc:00:00:00:C2, bridge=xenbr0'' ]
disk = [ ''phy:system/fw,sda1,w'' ]
root = "/dev/sda1 rw"
extra = "3 xencons=tty"
pci=[
''04:01.0'',''04:01.1'',''04:01.2'',''04:01.3''
]
===================================================Here are the configs for nds
Linux nds 2.6.22.13-0.3-xen #1 SMP 2007/11/19 15:02:58
UTC x86_64 x86_64 x86_64 GNU/Linux
===================================================name = "nds"
kernel = "/boot/vmlinuz-xen"
ramdisk = "/boot/initrd-xen"
memory = 128
vif = [ ''mac=aa:cc:00:00:00:C1, bridge=xenbr0'' ]
disk = [ ''phy:system/nds,sda1,w'' ]
root = "/dev/sda1 rw"
extra = "3 xencons=tty"
===================================================uname -a of dom0
Linux caesar 2.6.22.13-0.3-xen #1 SMP 2007/11/19
15:02:58 UTC x86_64 x86_64 x86_64 GNU/Linux
/boot/grub/menu.lst
===================================================...
title XEN -- openSUSE 10.3 - 2.6.22.13-0.3
root (hd0,0)
kernel /xen.gz dom0_mem=256M clocksource=jiffies
module /vmlinuz-2.6.22.13-0.3-xen
root=/dev/system/Dom0 vga=0x31a splash=silent showopts
module /initrd-2.6.22.13-0.3-xen
===================================================/etc/init.d/boot.local
===================================================modprobe pciback
hide=''(09:00.0)(04:01.0)(04:01.1)(04:01.2)(04:01.3)''
# 09:00.0 VGA compatible controller: nVidia
Corporation GeForce 8600 GT (rev a1)
# hide 8600 GT so it can be used in domU (not used at
the moment)
echo -n 0000:09:00.0 >
/sys/bus/pci/drivers/pciback/permissive
# 04:01.0 USB Controller: ALi Corporation USB 1.1
Controller (rev 03)
# 04:01.1 USB Controller: ALi Corporation USB 1.1
Controller (rev 03)
# 04:01.2 USB Controller: ALi Corporation USB 1.1
Controller (rev 03)
# 04:01.3 USB Controller: ALi Corporation USB 2.0
Controller (rev 01)
echo -n 0000:04:01.0 >
/sys/bus/pci/drivers/ohci_hcd/unbind
echo -n 0000:04:01.1 >
/sys/bus/pci/drivers/ohci_hcd/unbind
echo -n 0000:04:01.2 >
/sys/bus/pci/drivers/ohci_hcd/unbind
echo -n 0000:04:01.3 >
/sys/bus/pci/drivers/ehci_hcd/unbind
echo -n 0000:04:01.0 >
/sys/bus/pci/drivers/pciback/new_slot
echo -n 0000:04:01.1 >
/sys/bus/pci/drivers/pciback/new_slot
echo -n 0000:04:01.2 >
/sys/bus/pci/drivers/pciback/new_slot
echo -n 0000:04:01.3 >
/sys/bus/pci/drivers/pciback/new_slot
echo -n 0000:04:01.0 >
/sys/bus/pci/drivers/pciback/bind
echo -n 0000:04:01.1 >
/sys/bus/pci/drivers/pciback/bind
echo -n 0000:04:01.2 >
/sys/bus/pci/drivers/pciback/bind
echo -n 0000:04:01.3 >
/sys/bus/pci/drivers/pciback/bind
===================================================
Can any one help me here? How can I trace/solve that
problem?
greets chris
Machen Sie Yahoo! zu Ihrer Startseite. Los geht''s:
http://de.yahoo.com/set
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users