HELP!!!! I have been working diligently for the past 2 weeks trying to get Xen 3.0.2up and running on Kubuntu 6.06, Fedora Core 5, and Mandriva 2006.0 without any success. First off, the machine specs: Gateway M460 Notebook Intel Centrino M750 processor (1.8GHz) eth0: Broadcom T3 eth1: IPW2200 Wireless 80 GB hard drive 1 GB Memory ATI Radeon M600 video with 1280x800 LCD screen. Now the issues: Regardless of the distro I have installed, the following issues occur consistently. 1) I cannot compile from the source code, regardless of what I try. I''ve tried with gcc 3.3, gcc 3.4, and the gcc 4.x compilers. In each case about 50% of the way through the compiles, my machine shuts down. -- Workaround = Install from Binaries 2) Following an install from the Binaries (and for FC5, I''ve tried the xensource tgz, the xensource rpm and the fedora core quickstart installation methods), I boot up the machine and check out Dom-0. Everything is fine. But when I install a guest OS (either by following the howto''s at howtoforge, or any of the 20 or so howtos available on the web) and try to start the guest using "xm create {guest-name} -c", my guest starts, then after displaying the line "Checking if this processor honours the WP bit even in supervisor mode... Ok.", the guest appears to stop doing anything. But when I look at "xm list" it shows the guest domain running at well over 99% cpu. (e.g: At startup, Domain-0 showed Time of 46.8, now it is at 77.9, but my guest''s Time is at 1773.9). And in both cases above, a detailed investigation of the log files says nothing AFAICT. The last line in the xen logs just says my guest domain is "unpaused" So here are the questions: 1) Why can''t I compile? 2) Why can''t I get my guests to get me a login prompt? 3) What do I need to do to get this thing working? Sincerely, Eric _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com lists.xensource.com/xen-users
on ubuntu-dapper: apt-get install iproute bridge-utils python-twisted gcc binutils make zlib1g-dev python-dev transfig bzip2 screen debootstrap libcurl3-dev libncurses5-dev linux-source-2.6.15 kernel-package then follow: howtoforge.com/perfect_setup_xen3_debian_p3 this works. Me Myself schrieb:> HELP!!!! > > I have been working diligently for the past 2 weeks trying to get Xen > 3.0.2 up and running on Kubuntu 6.06, Fedora Core 5, and Mandriva > 2006.0 without any success. > > First off, the machine specs: > > Gateway M460 Notebook > Intel Centrino M750 processor (1.8GHz) > eth0: Broadcom T3 > eth1: IPW2200 Wireless > 80 GB hard drive > 1 GB Memory > ATI Radeon M600 video with 1280x800 LCD screen. > > > Now the issues: > > Regardless of the distro I have installed, the following issues occur > consistently. > > 1) I cannot compile from the source code, regardless of what I try. > I''ve tried with gcc 3.3, gcc 3.4, and the gcc 4.x compilers. In each > case about 50% of the way through the compiles, my machine shuts down. > > -- Workaround = Install from Binaries > > 2) Following an install from the Binaries (and for FC5, I''ve tried the > xensource tgz, the xensource rpm and the fedora core quickstart > installation methods), I boot up the machine and check out Dom-0. > Everything is fine. But when I install a guest OS (either by > following the howto''s at howtoforge, or any of the 20 or so howtos > available on the web) and try to start the guest using "xm create > {guest-name} -c", my guest starts, then after displaying the line > "Checking if this processor honours the WP bit even in supervisor > mode... Ok.", the guest appears to stop doing anything. But when I > look at "xm list" it shows the guest domain running at well over 99% > cpu. ( e.g: At startup, Domain-0 showed Time of 46.8, now it is at > 77.9, but my guest''s Time is at 1773.9). > > And in both cases above, a detailed investigation of the log files > says nothing AFAICT. The last line in the xen logs just says my guest > domain is "unpaused" > > So here are the questions: > > 1) Why can''t I compile? > > 2) Why can''t I get my guests to get me a login prompt? > > 3) What do I need to do to get this thing working? > > Sincerely, > > Eric > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com lists.xensource.com/xen-users