Hi ALL, Short description of my problem: I am not able to make wireless network working on the IBM ThinkPad T43p. System: T43p OS: CentOS 4.4 kernel: 2.6.9-34.EL firmware: ipw2200-firmware-3.0-3.nodist.rf.noarch.rpm What did I do ? - installed firmware from RPM package - removed kernel driver (/sbin/rmmod ipw2200) - installed kernel module (/sbin/modprobe ipw2200) dmesg output: ================Dec 24 16:45:43 localhost kernel: ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.0 Dec 24 16:45:43 localhost kernel: ipw2200: Copyright(c) 2003-2004 Intel Corporation Dec 24 16:45:43 localhost kernel: ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 11 (level, low) -> IRQ 11 Dec 24 16:45:43 localhost kernel: ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Dec 24 16:45:44 localhost hald[3408]: Timed out waiting for hotplug event 577. Rebasing to 578 Dec 24 16:45:44 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team Dec 24 16:46:00 localhost hald[3408]: Timed out waiting for hotplug event 580. Rebasing to 581 Dec 24 16:46:02 localhost hald[3408]: Timed out waiting for hotplug event 583. Rebasing to 584 Dec 24 16:46:04 localhost hald[3408]: Timed out waiting for hotplug event 587. Rebasing to 588 Dec 24 16:46:06 localhost hald[3408]: Timed out waiting for hotplug event 590. Rebasing to 591 Dec 24 16:46:08 localhost hald[3408]: Timed out waiting for hotplug event 593. Rebasing to 594 - started 'system-config-network' tool - checked eth1 (wireless) (aka enabled wireless) - edited (via edit buton ) eth1 configuration Mode: auto Network name (SSID): linksys Channel: 1 Transmit rate: auto Key: 0x????? (26 hex numbers) - clicked the Activate button Result: dmesg output: Dec 24 19:25:06 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team Dec 24 19:25:07 localhost hald[3408]: Timed out waiting for hotplug event 626. Rebasing to 627 Dec 24 19:25:21 localhost hald[3408]: Timed out waiting for hotplug event 629. Rebasing to 630 Dec 24 19:25:23 localhost hald[3408]: Timed out waiting for hotplug event 632. Rebasing to 633 terminal output: Error for wireless request "Set Bit Rate" (8B20) : SET failed on device eth1 ; Operation not supported. Determining IP information for eth1... failed; no link present. Check cable? Can some merciful soul give me a hint or/and solution or/and RTFM pointer for my problem ? Thanks in advance Igor -- Experience is what you get when you didn't get what you wanted. Randy Pausch -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20071224/7ef216ba/attachment-0002.html>
I've solved the problem by installing Ubuntu 7.10 on the Laptop. Wireless worked 'out of the box'. Regards Igor On Mon, Dec 24, 2007 at 7:40 PM, Primorec <igor.furlan at gmail.com> wrote:> Hi ALL, > > Short description of my problem: > > I am not able to make wireless network working on the IBM ThinkPad T43p. > > System: T43p > OS: CentOS 4.4 > kernel: 2.6.9-34.EL > firmware: ipw2200-firmware-3.0-3.nodist.rf.noarch.rpm > > What did I do ? > > - installed firmware from RPM package > - removed kernel driver (/sbin/rmmod ipw2200) > - installed kernel module (/sbin/modprobe ipw2200) > > dmesg output: > ================> Dec 24 16:45:43 localhost kernel: ipw2200: Intel(R) PRO/Wireless 2200/2915 > Network Driver, 1.0.0 > Dec 24 16:45:43 localhost kernel: ipw2200: Copyright(c) 2003-2004 Intel > Corporation > Dec 24 16:45:43 localhost kernel: ACPI: PCI interrupt 0000:04: 02.0[A] -> > GSI 11 (level, low) -> IRQ 11 > Dec 24 16:45:43 localhost kernel: ipw2200: Detected Intel PRO/Wireless > 2200BG Network Connection > Dec 24 16:45:44 localhost hald[3408]: Timed out waiting for hotplug event > 577. Rebasing to 578 > Dec 24 16:45:44 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core > team > Dec 24 16:46:00 localhost hald[3408]: Timed out waiting for hotplug event > 580. Rebasing to 581 > Dec 24 16:46:02 localhost hald[3408]: Timed out waiting for hotplug event > 583. Rebasing to 584 > Dec 24 16:46:04 localhost hald[3408]: Timed out waiting for hotplug event > 587. Rebasing to 588 > Dec 24 16:46:06 localhost hald[3408]: Timed out waiting for hotplug event > 590. Rebasing to 591 > Dec 24 16:46:08 localhost hald[3408]: Timed out waiting for hotplug event > 593. Rebasing to 594 > > > - started 'system-config-network' tool > - checked eth1 (wireless) (aka enabled wireless) > - edited (via edit buton ) eth1 configuration > Mode: auto > Network name (SSID): linksys > Channel: 1 > Transmit rate: auto > Key: 0x????? (26 hex numbers) > - clicked the Activate button > > Result: > dmesg output: > Dec 24 19:25:06 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core > team > Dec 24 19:25:07 localhost hald[3408]: Timed out waiting for hotplug event > 626. Rebasing to 627 > Dec 24 19:25:21 localhost hald[3408]: Timed out waiting for hotplug event > 629. Rebasing to 630 > Dec 24 19:25:23 localhost hald[3408]: Timed out waiting for hotplug event > 632. Rebasing to 633 > > terminal output: > Error for wireless request "Set Bit Rate" (8B20) : > SET failed on device eth1 ; Operation not supported. > > Determining IP information for eth1... failed; no link present. Check > cable? > > > Can some merciful soul give me a hint or/and solution or/and RTFM > pointer for my problem ? > > Thanks in advance > > Igor > > > -- > Experience is what you get when you didn't get what you wanted. > > Randy Pausch-- Experience is what you get when you didn't get what you wanted. Randy Pausch -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080224/b89abcc5/attachment.html>
On Sun, 24 Feb 2008, Primorec wrote:> On Mon, Dec 24, 2007 at 7:40 PM, Primorec <igor.furlan at gmail.com> wrote: > >> Short description of my problem: >> >> I am not able to make wireless network working on the IBM ThinkPad T43p. >> >> System: T43p >> OS: CentOS 4.4 >> kernel: 2.6.9-34.EL >> firmware: ipw2200-firmware-3.0-3.nodist.rf.noarch.rpm >> >> Can some merciful soul give me a hint or/and solution or/and RTFM >> pointer for my problem ? > > I've solved the problem by installing Ubuntu 7.10 on the Laptop. Wireless > worked 'out of the box'.I have a Thinkpad T43 and am using these: ipw2200-firmware-3.0-3.nodist.rf kernel-2.6.18-53.1.6.el5 NetworkManager-0.6.4-6.el5 Then make sure NetworkManager is running by doing: chkconfig NetworkManager on service NetworkManager start as root. Remember that CentOS is both a Server as a Desktop OS and therefor not all services you expect to run are enabled for a Desktop. (like NetworkManager) If you are running CentOS as a Desktop, you are often much better off using the most recent CentOS release (like CentOS 5.1). -- -- dag wieers, dag at centos.org, http://dag.wieers.com/ -- [Any errors in spelling, tact or fact are transmission errors]