similar to: Polycom 601 Second Incoming Call

Hi Guys, I have some Polycom 601's here. It is super annoying that the phone every so often beeps to let me know that I have a VM. Is there any way to turn that off ? (I just want the red led to blink that there is a VM). Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

Good morning, I have a Polycom 601 with two side cars. I created a list of contacts in XML and it shows up on the side cars exaclty how I set it up in the XXXXXXXXXXXX-directory.xml file (in the order that I wanted it etc.). However when I hit the directories button and then contact directory I see the list in alphabetical order based on the last name. I want it to show up in this list as well in

Asterisk 1.2.13 - Evolution PBX from Intuitive Voice Technologies We have an installation of 35 SIP phones (Polycom 501) and one receptionist phone (Polycom 601). I have 15 of the 501s set up to accept a "Page". From what I understand, the "Page" is done using the asterisk page application that throws the extensions into a conference room and then set the originating caller

Hi All, I have a pretty standard Asterisk PBX setup with 60 SIP Peers, mostly Polycom 501's and a receptionist phone, Polycom IP 601 with 3 attached sidecars and Buddy Watch enabled monitoring all other SIP phones. The problem occurs when a group (all SIP peers) Page is called. Not always but sometimes when the Page is executed, the IP 601 will become unreachable from Asterisk. So when the

Hi, all I am in Australia and I have to setup Asterisk in few offices. There will be IP phones in each office and I must be able to call between offices. I need actual handsets. I need "standard" handsets to be used by people. Those must support features like CID, call forward, etc. --- your normal office feature set. Also I need some sort of more complex handset to be used by

I am having the same issue as below. Has this issue been solved or does anyone know an answer? This error recently began and we have multiple phones out of commission. PLEASE HELP!! http://lists.digium.com/pipermail/asterisk-users/2006-August/162841.html How did you find out about 468*??? It's sure as poop not documented in the Polycom Admin Guide anywhere. -----Original Message-----

Hello, We are planning to replace our current PBX with an Asterisk / SIP solution, and are now trying to decide which phones to get. My first thought was the Cisco 7960G, but the Cisco licensing scheme irritates me enough that I'll probably end up going with either the Polycom IP-600 or Snom 360. If anyone has any opinions of these phones, especially in comparison to each other, I would

I've been playing with Asterisk for a few weeks and it's working great. I have a question about getting multi-line receptionist phones working. I was thinking about getting one of these expansion ports: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet0 9186a008008883d.html What are people using for receptionist phones that show all the extensions in

I was reading a Polycom brochure and it appears that there is really no special receptionist console and the console is basically a IP601. Is this correct? The only difference is to purchase an expansion module in order to have more shortcut keys for the girls. So, apart from the hardware, as far as the dialplan is concerned, do I just treat the receptionist console as any other extension? Are

Hi, all. I want to have a button on my receptionist's 601 that, when pressed, will forward her current call to a given extension. Is there any way to do that? I've tried to RTFM, but I'm coming up empty. Thanks, -Ken D'Ambrosio

I need to provide a 80 people office with VOIP. I want to commit to one vendor Polycom or Aastra. Price of the phones is not a factor in the decision. The quality of the phones is the factor. Some of the features that I am evaluating on are: (arranged in order of priority) 1. Sound quality 2. complete product line with conference phone and receptionist phone (not on Aastra) 3. cordless (not on

Is it possible for Asterisk to set the ptime attribute on outbound calls in SDP invite? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060405/7e1e68d1/attachment.htm

Hello, list! I'd like to create an extension that points to an offsite location (a number on the PSTN), the purpose of which would be to see if that offsite location is still on a call forwarded to it by Asterisk. This way a receptionist could choose to transfer calls to a mobile phone only if it's finished with the last call the receptionist forwarded to it. If I configure a custom

JR Richardson Engineering for the Masses> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of asterisk-users- > request at lists.digium.com > Sent: Saturday, March 01, 2008 12:00 PM > To: asterisk-users at lists.digium.com > Subject: asterisk-users Digest, Vol 44, Issue 1 > >

I have a Polycom IP600 serving as a receptionist phone. We developed a call manager via c/gtk that runs on a touchpad. It allows them to transfer calls, transfer to voicemail, page, etc. The problem is this: When paging another phone from the touchpad, I have to open a channel to the receptionist phone. This rings the receptionist phone. When she picks up, it then pages the desired person. This is

Hi Guys, A while back (several months ago) I was having issues with wmy Polycom's and Asterisk. I was told to use a specific set of firmware and sip version. I am unable to find that email. Anyone know which ones work well with Asterisk ? (I believe it was 2.x ) Thanks, Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hey all... Scenario (INTERNAL) 1 Call comes in to receptionist and gets transferred to someone 2 No one picks up that transfer 3 Call goes back to receptionist Now when the call goes back to the receptionist, how can I change either the ringer, the callerID or both? * TIA

Hello list, I know this has been brought up before but I dont think there was ever a final answer. Is it legal in the US to modify asterisk to show the CID information that was received as blocked ? Thanks. Dovid p.s. Sorry for the poor typing format, it was written from a mobile phone. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam

Hello, I am an active member of the Vinux community and have taken on a project of remastering a Ubuntu installation Cd in order to make it accessable to a blind user. I am able to sound the system bell when the boot menu loads by adding a ^G to the label statement which works well to tell a blind user they are at the boot menu. My intent is to sound the bell at each menu item, but I'm unable

I found this solution from the web and figured I'd share it because it affects all phones getting input from IIS. Map .gif, .jpg, .css etc (in my case I used .xhtml for the Polycom 601) in IIS under your sites: Properties -> Virtual directory tab-> Configuration -> Application configuration -> Mappings tab. Make ASP DLL [..\inetsrv\asp.dll] to handle these files. This