similar to: Polycom IP 600

Hi, I am setting up a dispatch center where will have 4 call takers, all with Polycom IP 600 Sip phones. Each phone will be setup with 6 extensions each. When a new call comes in, the first extension on all the phones will ring. This works fine, the problem is when one of the dispatchers is already using her first extension and another call comes in. What happens now is that the remaining 3

Hi, I'm testing a Polycom IP600. With firmware version 1.1 the phone reboots at any time. With firmware version 1.2, the first reboot was an endless reboot. Then I moved the phone to another lan port, then it worked fine. Then I installed again in the initial lan port and the phone works well. However after some time of inactivity (1 hour?), the IP600 stops to send and receive calls.

Have a strange problem... When a C7960 calls the Polycom ip600, the ip600's first line button blinks, the ip600 display shows the proper callerid, but the phone does not ring at all. If I call the same ip600 from a bt102, the ip600 rings properly. If I call the same ip600 from another C7960, the ip600 rings properly. All phones and asterisk are on the same lan within a few feet. The

This Polycom phone seems to be one of the best on the market for sound quality and features. I have seen on the list that some people have gotten the IP 600 to work with Asterisk. Does anyone have the details of how to get this working i.e. XML phone config files, and any thing else I might need to know. Thank You, Chad Cowan -------------- next part -------------- An HTML attachment

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

Hello all, Has anyone used the SIP version of this phone with Asterisk? I see Polycom has a H.323 and MGCP version also, does anyone know if you flash the phone to swith protocols? Thanks in advance for the info. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm

Hello, After checking out CVS HEAD from yesterday (for those new PLC/Jitterbuffer patches), I was affected by bug 3795 with my Polycom IP600's. After seing it resolved as of this morning (thanks Mark), I decided to try again... I can answer incoming calls. No problem there. Putting calls on hold, however, results in my Polycom IP600 indicating the call on hold, but the caller does

Hi all, I've just updated to current CVS, and have 2 polycom IP phones, one is a IP600 and the other is a IP300. The IP600 shows the status of the IP300 and a ZAP line quite nicely, but the IP300 won't show the status of the IP600.... Is there any additional debug apart from "show hints" to see why this might not be working ?? -= Registered Asterisk Dial Plan Hints =-

Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goes dead with two red lights on. The one in the top right corner

Hi I am struggling with hardware choices to get started with. My options are narrowed down to SIP phones - Polycom IP500, IP600 and Cisco 7940G. of importance is: - functionality / integration with asterisk - headset functionality and use - voice quality - build quality Is there much of a difference between Polycom and Cisco? Scanning the group it looks like there may be slightly more

Hi, I am mostly happy with my Polycom IP600 but it apparently needs to check the FTP server every minute. I couldn't find any obvious setting related to that behavior in the configuration files. Any idea how to curb the IP600's spurious network activity? Thanks, -- Lord, protect me from your followers.

I am currently utilizing Polycom IP600 phones and presense. I have placed the hint directives in and everything seems to work fine. But this only works for a short period of time. After about 30 minutes, the extensions do not see when others are on the phone. Has anyone seen this type of behavior before? I am currently utilizing v1.5.2 of the polycom software and the cvs-head release from

I have a Polycom IP600 serving as a receptionist phone. We developed a call manager via c/gtk that runs on a touchpad. It allows them to transfer calls, transfer to voicemail, page, etc. The problem is this: When paging another phone from the touchpad, I have to open a channel to the receptionist phone. This rings the receptionist phone. When she picks up, it then pages the desired person. This is

I am using Polycom IP600 phone. If I call a phone which has DND (do not disturb) enabled, the message to the caller will be "The person on extension ... is on the phone, please leave a message ...". Is there a way to pick the "person ... not available" message instead?

Has anyone been able to get the minibrowser on the Polycom SoundPoint IP 500/600 phones working? If so could you share the relevant sections of your config with me?

Hi all, I dont know why, but if I plug my PC inside the 'PC' slot on my polycom, this is not working. (Polycom IP600 is online on the net.) I'm using normal network cables. (I see jumpers behind the phone... do I need to play arround with that?) Any help would be appreciated. -- Alexandre Leclerc

I'm trying to develop a company phone list accessible via the minibrowser feature on the phone. The pertinent section of ipmid.cfg is as follows: <microbrowser mb.proxy=""> <idleDisplay mb.idleDisplay.home="http://server/polycom/index.html" mb.idleDisplay.refresh="300"/> <main

Hi All - I've got a load of Polycom phones, and for the most part, I think they're great, but one thing that is bugging the heck out of me (and my users) is the "on-hold" feature. When you're on a call, and another one comes in, it doesn't ring the second line appearance on the phone, even though I have it registered separately, and I've tried to make my

Hello, I have configured my polycom ip600 and ip500. The phone works well. But the clock is wrong and flashes the whole time. Drives me nuts! I have set the time offset on the DHCP / boot server. 36000 (I'm in Australia!) It doesn't seem to help... Mike

Hello list: I have a very odd problem. Seemingly randomly, my Polycom IP600 phones will ring without a call being placed to it. That is to say, a random phone will ring. Nothing shows up under Caller ID. Even the buttons that light up to show an incoming call do not light up. If you pick up the handset, you can hear the phone ring through the speaker. Hanging up the phone makes it stop