samba - Mar 2003 - Win XP-home connecting to Samba, ahhh, please help!

I'm about ready to pull my teeth out over this.  I just installed Red
Hat 8.0, have not used Linux much in the past, which is why I went with
Red Hat, sposeto be easier, more support etc.

The network the Linux box resides in has 2 WinXP-home computers, and a
Win200 Pro computer.  They are all sharing all files, no passwords, no
domain, just a workgroup called "ESR".

I just want the Linux computer to be able to be seen on the network,
and copy/move files freely around on it and others.  I can see the
Windows computers from the Linux box just fine, connect to shares, etc.
 But from the Windows computers the best I've done is I can see the
Linux computer sometimes, rarely, I can never access it, if I even
click on it in Windows it will time-out and say that network resource
can not be found.

I have tried every "general purpose" smb.conf file I can find on the
Internet, usually with different workgroup names, so I can see when the
Windows computers sees the new workgroup, however, I have yet to ever
be able to see the Linux computer under any of the new workgroups, even
clicking on the new workgroup ends up timing out and saying it can't
find that network resource.  Ahhhhh, so you see the frustration!

I have gone through the smb.conf file about 100 times, trying different
options, turning others off, absolutely nothing has helped.  I tried to
use the SWAT config tool, however that isn't available for Samba 2.2.5
apparently, which is what shipped with RH 8.0.  I am downloading 2.2.7
now but if I can't get this working, why think I can get 2.2.7 working.

So, any help would be appreciated, currently this is my
'/etc/samba/smb.conf' file:

[root@localhost samba]# more smb.conf
[global]
workgroup = HOME_1
server string = Samba Server
netbios name = linuxbox
hosts allow = 192.168.0.202 127.0.0.1 192.168.0.121
security = share
smb passwd file = /etc/samba/smbpasswd

[temp]
guest ok = yes
guest only = yes
guest account = ftp
path = /tmp
writeable = yes

[root]
guest ok = yes
guest only = yes
guest account = ftp
path = /root
writeable = yes

With the above file as my smb.conf file, in the WinXP-home computers, I
can see the workgroups 'HOME_1', but if I click on it to see any
computers in it, it'll time-out and then just say the network path was
not found, you might not have permission, etc...the WinXP computer I'm
testing this on has a IP of '192.168.0.202', the Linux box has a IP of
192.168.0.121 (I added that in the file thinking it might help,
didn't).

So any help would be GREATLY appreciated.  I'm definetly not a Linux
experienced user, and proving that every second now.

Feel free to e-mail me directly.

Thanks,
Mark Brodis
fj40rockcrawler@yahoo.com


__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/

Ok... let's change that security=share to security=user. Turn encrypt
passwords to yes and take note of which user you are signing on to WinXP and
Win2000 with. From the sounds of things you probably have Windows
automatically signing on... just because you don't enter a password,
doesn't
mean that you don't have one. You need to go to the linux box and do a
useradd 'winusername' where winusername is the username used to logon to
Win2000/WinXP. Then do a smbpasswd -a 'winusername'. Also, for sanity
sake,
change your workgroup to match your windows workgroup.

If you have any other questions, don't hesitate to ask

Jim
----- Original Message -----
From: "Mark Brodis" <fj40rockcrawler@yahoo.com>
To: <samba@lists.samba.org>
Sent: Friday, March 07, 2003 5:46 PM
Subject: [Samba] Win XP-home connecting to Samba, ahhh, please help!

> I'm about ready to pull my teeth out over this.  I just installed Red
> Hat 8.0, have not used Linux much in the past, which is why I went with
> Red Hat, sposeto be easier, more support etc.
>
> The network the Linux box resides in has 2 WinXP-home computers, and a
> Win200 Pro computer.  They are all sharing all files, no passwords, no
> domain, just a workgroup called "ESR".
>
> I just want the Linux computer to be able to be seen on the network,
> and copy/move files freely around on it and others.  I can see the
> Windows computers from the Linux box just fine, connect to shares, etc.
>  But from the Windows computers the best I've done is I can see the
> Linux computer sometimes, rarely, I can never access it, if I even
> click on it in Windows it will time-out and say that network resource
> can not be found.
>
> I have tried every "general purpose" smb.conf file I can find on
the
> Internet, usually with different workgroup names, so I can see when the
> Windows computers sees the new workgroup, however, I have yet to ever
> be able to see the Linux computer under any of the new workgroups, even
> clicking on the new workgroup ends up timing out and saying it can't
> find that network resource.  Ahhhhh, so you see the frustration!
>
> I have gone through the smb.conf file about 100 times, trying different
> options, turning others off, absolutely nothing has helped.  I tried to
> use the SWAT config tool, however that isn't available for Samba 2.2.5
> apparently, which is what shipped with RH 8.0.  I am downloading 2.2.7
> now but if I can't get this working, why think I can get 2.2.7 working.
>
> So, any help would be appreciated, currently this is my
> '/etc/samba/smb.conf' file:
>
> [root@localhost samba]# more smb.conf
> [global]
> workgroup = HOME_1
> server string = Samba Server
> netbios name = linuxbox
> hosts allow = 192.168.0.202 127.0.0.1 192.168.0.121
> security = share
> smb passwd file = /etc/samba/smbpasswd
>
> [temp]
> guest ok = yes
> guest only = yes
> guest account = ftp
> path = /tmp
> writeable = yes
>
> [root]
> guest ok = yes
> guest only = yes
> guest account = ftp
> path = /root
> writeable = yes
>
> With the above file as my smb.conf file, in the WinXP-home computers, I
> can see the workgroups 'HOME_1', but if I click on it to see any
> computers in it, it'll time-out and then just say the network path was
> not found, you might not have permission, etc...the WinXP computer I'm
> testing this on has a IP of '192.168.0.202', the Linux box has a IP
of
> 192.168.0.121 (I added that in the file thinking it might help,
> didn't).
>
> So any help would be GREATLY appreciated.  I'm definetly not a Linux
> experienced user, and proving that every second now.
>
> Feel free to e-mail me directly.
>
> Thanks,
> Mark Brodis
> fj40rockcrawler@yahoo.com
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - forms, calculators, tips, more
> http://taxes.yahoo.com/
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba

Mark Brodis schrieb:
> 
> The network the Linux box resides in has 2 WinXP-home computers, and a
> Win200 Pro computer.  They are all sharing all files, no passwords, no
> domain, just a workgroup called "ESR".
> 
> I just want the Linux computer to be able to be seen on the network,
> and copy/move files freely around on it and others.  I can see the
> Windows computers from the Linux box just fine, connect to shares, etc.
>  But from the Windows computers the best I've done is I can see the
> Linux computer sometimes, rarely, I can never access it, if I even
- in your windows client there's files named "hosts.sam" and 
"lmhosts.sam" - copy them to "hosts" and "lmhosts"
and write in your
server. - so u can be shure, that the name is resolved right.
- next please (if u did): *never* use the same name for user and machine!
> click on it in Windows it will time-out and say that network resource
> can not be found.
- is this always the situation, or is it "mostly"??
- are u using cat5/rj45 cables? - this cables (if they are not TIA/EIA 
568) have the effect, that the connection breaks in stress. - this u can 
test following:
try to ping "slow" (from linux) 'ping <ipadress>'
check the lost packages.
try to ping "fast and heavy" 'ping -fs 10000 <ipadress>'
check the lost packages again...

next:
u are using rh 8.0?
redhat's firewall (i think standard security), if installed, denies 
netbios access, so, maybe u see the linux server, but u cannot access...

additional:
please check, if u installed the "plain text password" registry hack
on
the clients...

gk