Ironhide*CLI> dialplan show phones
[ Context 'phones' created by 'pbx_config' ]
Include => 'internal'
[pbx_config]
-= 0 extensions (0 priorities) in 1 context. =-
Ironhide*CLI> dialplan show internal
[ Context 'internal' created by 'pbx_config' ]
'1000' => 1. Verbose(1|Extension 1000)
[pbx_config]
2. Dial(SIP/1000|30) [pbx_config]
3. Hangup() [pbx_config]
'1001' => 1. Verbose(1|Unrouted call handler)
[pbx_config]
2. Answer() [pbx_config]
3. Wait(1) [pbx_config]
4. Playback(our-business-hours-are) [pbx_config]
5. Hangup() [pbx_config]
'500' => 1. Verbose(1|Echo test application)
[pbx_config]
2. Playback(our-business-hours-are) [pbx_config]
3. Hangup() [pbx_config]
'_XXXXXXX' => 1. Verbose(1|Dial Digicel)
[pbx_config]
2. Dial(${LOCAL_OUT_TRUNK}/${EXTEN}) [pbx_config]
3. Congestion() [pbx_config]
4. Hangup() [pbx_config]
-= 4 extensions (15 priorities) in 1 context. =-
Message: 11
Date: Sun, 14 Jun 2009 06:32:16 +0300
From: Tzafrir Cohen <tzafrir.cohen at xorcom.com>
Subject: Re: [asterisk-users] FXS - TDM400 - No dial tone
To: asterisk-users at lists.digium.com
Message-ID: <20090614033216.GF3311 at xorcom.com>
Content-Type: text/plain; charset=iso-8859-1
On Sat, Jun 13, 2009 at 10:13:11PM -0400, Richard McNeilly wrote:
> More Troubleshooting
>
> Ironhide*CLI> zap show channels
> ?? Chan Extension? Context???????? Language?? MOH Interpret
> ?pseudo??????????? phones???????????????????? default
> ????? 2??????????? phones???????????????????? default
> ????? 3??????????? incoming?????????????????? default
> ????? 4??????????? incoming?????????????????? default
dialplan show phones
On Sat, Jun 13, 2009 at 10:13 PM, Richard McNeilly<ramcneilly at
gmail.com> wrote:> I have a TMD400 card installed in a PC with one fxs (installed in slot
> 2) and two fxos (installed in slots 3 & 4).? fxos work fine but I am
> unable to get a dial tone for any devices connected to the fxs.? I
> have correctly connected the power supply to the card and I have even
> tried moving the card from slot 1 to 2 on the board.
>
> Below is from the console when I try to route a call from FXO on slot
> 4 to the FXS on slot 2.? Notice the FXS is "ringing"
>
> ? -- Executing [s at incoming:1] Verbose("Zap/4-1",
"1|Unrouted call
> handler") in new stack
> ?Unrouted call handler
> ??? -- Executing [s at incoming:2] Answer("Zap/4-1",
"") in new stack
> ??? -- Executing [s at incoming:3] Wait("Zap/4-1", "1")
in new stack
> ??? -- Executing [s at incoming:4] Dial("Zap/4-1",
"Zap/2|30") in new stack
> ??? -- Called 2
> ??? -- Zap/2-1 is ringing
> ??? -- Zap/2-1 is ringing
> ??? -- Zap/2-1 is ringing
> ??? -- Zap/2-1 is ringing
>
> zaptel.conf
>
> fxoks=2
> fxsks=3-4
> loadzone=us
> defaultzone=us
>
>
> zapata.conf
>
> [trunkgroups]
> ;define any trunk groups
>
> [channels]
> ; default
> usecallerid=yes
> hidecallerid=no
> callwaiting=no
> threewaycalling=yes
> transfer=yes
> echocancel=yes
> echotraining=yes
> immediate=no
>
> ; define incoming channels
> signalling=fxs_ks??? ; Use FXS signaling for an FXO channel
> context=incoming
> callerid=asreceived
> group=1
> channel => 3,4???????? ; PSTN attached to port 3
>
> ; define outgoing channels
> signalling=fxo_ks? ; Use FXS signaling for an FXO channel
> context=phones
> group=2
> channel => 2
>
>
>
> More Troubleshooting
>
> Ironhide*CLI> zap show channels
> ?? Chan Extension? Context???????? Language?? MOH Interpret
> ?pseudo??????????? phones???????????????????? default
> ????? 2??????????? phones???????????????????? default
> ????? 3??????????? incoming?????????????????? default
> ????? 4??????????? incoming?????????????????? default
>
>
> ztcfg -vvv
>
> Zaptel Version: 1.4.11
> Echo Canceller: OSLEC
> Configuration
> =====================>
>
> Channel map:
>
> Channel 02: FXO Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
>
> 3 channels to configure.
>
>
> Software-wise things seem ok and I am certain that I have the power
> connected to the PCI card correctly.
>
> Any suggestions as to what I may be doing wrong here?
>
> Richard
>