Displaying 20 results from an estimated 274 matches for "kewlstart".
2005 Sep 07
1
ztcfg Kills My Dial Tone
...f,b8zs
fxsks=1-12
fxoks=13-48
defaultzone = us
loadzone = us
*** Here's the output of ztcfg -vvv: ***
Zaptel Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Defa...
2006 Feb 19
3
Asterisk start errors with TDM2413E
.../ztcfg
insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko
**** This takes at least 10 seconds to come back to a prompt ****
ztcfg output
[root@astrk1-phx asterisk]# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
C...
2020 Oct 22
1
Digium TE134 compatibility issues with new Dell server - Zero interrupts
...Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 32 MB
/usr/sbin/dahdi_cfg -vvv
DAHDI Tools Version - 3.1.0
DAHDI Version: 3.1.0
Echo Canceller(s): HWEC
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Echo...
2004 Apr 22
2
Problems with ADIT600 and T100P
I am having trouble getting my T100P and ADIT 600 talking. I have 2 FXO
8 port cards in the ADIT and a T1 controller card. I have a T1 x-over
cable connecting two together. Here are copies of the relevant bits of
my zaptel.conf and Zapata.conf
Zaptel.conf
span=1,0,0,esf,b8zs
loadzone=us
defaultzone=us
Zapata.cfg
context=default
signalling=fxs_ks
group=1
channel => 1-24
My
2008 Mar 27
3
problem about voice when using TDM2400p with VPMADT032 echo canceller module
...ceived
group=0
context=from-zaptel
channel => 10
context=default
...........more...........
[IP-PBX ~]# ztcfg -vv
----------------------------------------------
Zaptel Version: 1.4.7-3259
Echo Canceller: OSLEC
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Defa...
2006 May 09
2
Problems with TDM400P and FXO modules
...7 09:17:37 WARNING[7739] chan_zap.c: Unable to specify channel 9: No
such device
May 7 09:17:37 ERROR[7739] chan_zap.c: Unable to open channel 9: No such
device
here = 0, tmp->channel = 9, channel = 9
ztcfg output is:
Zaptel Configuration
======================
Channel map:
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 08)
Channel 09: FXS Kewlstart (Defa...
2012 Nov 02
1
Unable to create channel of type 'DAHDI' (cause 17 - User busy)
...ext=Incoming
channel=1-20
After loading module in astrisk giving o/p below
module load chan_dahdi.so
Loaded chan_dahdi.so
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
== Parsing '/etc/asterisk/users.conf': == Found
-- Registered channel 1, FXS Kewlstart signalling
-- Registered channel 2, FXS Kewlstart signalling
-- Registered channel 3, FXS Kewlstart signalling
-- Registered channel 4, FXS Kewlstart signalling
-- Registered channel 5, FXS Kewlstart signalling
-- Registered channel 6, FXS Kewlstart signalling
-- Registered...
2010 May 23
2
Dahdi problems with kernel 2.6.32
...problems with dahdi using kernel 2.6.32. I am using
2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv
++ dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r8670
DAHDI Version: SVN-trunk-r7445M
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
2 channels to configure.
Changing signalling on channel 1 from Unused to FXO Kewlstart
Setting echocan for channel 1 to mg2
Changing signalling on channel 4 from Unused to FXS Kewlsta...
2012 Jun 03
1
Dahdi 2.6.1 with OSLEC support
...ar my self talking on the phone. How to solve this? I think I need to
recompile dahdi 2.6.1 with OSLEC support? how?
[root at callcenter ~]# dahdi_cfg -vvv
DAHDI Tools Version - 2.6.1
DAHDI Version: 2.6.1
Echo Canceller(s): HWEC
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (...
2005 Jul 12
3
Help Configuring TDM04B
Hi:
I had an fxo card from Digitnetworks and it was
working fine on my Asterisk box. I then replaced it
with TDM04B. I changed the zaptel and zapata to
include the four channels. When I run ztcfg, I get
configuration errors:
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or
address (6)
Any suggestions beside the power plug...
2009 Apr 07
1
Fwd: [asterisk-r2] MFCR2 With Unicall - can unicall affect zaptel commands?
...le load' instead.
>> > == Parsing '/etc/asterisk/zapata.conf': Found
>> > == Parsing '/etc/asterisk/zapata_additional.conf': Found
>> > == Parsing '/etc/asterisk/zapata-channels.conf': Found
>> > -- Registered channel 63, FXO Kewlstart signalling
>> > -- Registered channel 64, FXO Kewlstart signalling
>> > -- Registered channel 65, FXO Kewlstart signalling
>> > -- Registered channel 66, FXO Kewlstart signalling
>> > -- Registered channel 67, FXO Kewlstart signalling
>> >...
2008 Mar 18
1
Sangoma FXO/FXS config
...to the PBX
and have all but 1 line working (BT Featureline problems), but after a
month or playing, I realised I have 4 FXS ports and 2 FXO ports.
---
[root at asterisk ~]# ztcfg -vvv
Zaptel Version: 1.4.9.2
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 07: FXO Kewlstart (Default) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Slaves: 08)
6 channels to configure.
---...
2005 May 30
2
Error in Zapata Config?
When I reload the config, I see this error in the CLI. However, I don't see
what I have done wrong:
== Parsing '/etc/asterisk/zapata.conf': Found
May 30 16:38:42 WARNING[12630]: chan_zap.c:10088 setup_zap: Ignoring
signalling
-- Reconfigured channel 1, FXO Kewlstart signalling
May 30 16:38:42 WARNING[12630]: chan_zap.c:10088 setup_zap: Ignoring
signalling
-- Reconfigured channel 2, FXO Kewlstart signalling
May 30 16:38:42 WARNING[12630]: chan_zap.c:10088 setup_zap: Ignoring
signalling
-- Reconfigured channel 3, FXS Kewlstart signalling
-- Reconfigu...
2004 May 19
4
TDM400P problems with 1 FXS, 1 FXO
...searched the wiki and the list archives. Stock Debian
3.0 stable installation. Any advice? Thanks.
-- David
Here's my configuration:
modprobe zaptel
modprobe wcfxs
report no errors.
box:/etc/asterisk# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
---------------
So it looks like things are OK so far. Here's the relevant portion of
my zaptel.conf:
defaultzone=us
# load FXO X100P channel 1, kewlstart signalling
# turned off, card removed
#f...
2004 Dec 16
0
kewlstart - explanation of this method, please ?
Hello, is there a full guide to what kewlstart is supposed to do with FXO or
FXS lines ? is it only applicable to one of the interfaces FXO -or- FXS but
not both ? I asked earlier if FXS lines can be made to reverse polarity, and
someone else pointed out that the chipset on the FXS ports seems to support
it, perhaps the driver in the asterisk z...
2003 Nov 05
1
Beginners help
...4864 0 [ppp_generic]
usb-ohci 17064 0 (unused)
usbcore 36416 0 [usb-ohci]
amd74xx 9380 1
nvnet 25216 2
--------
"ztcfg -vv **" outputs:
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
6 channels configured.
2009 Sep 27
3
Problems with Digium TDM400 card
...But still problems:
Here is my ztcfg output:
asterisk:/etc/asterisk # ztcfg -vvvvv
Notice: Configuration file is /etc/zaptel.conf
line 4: Unable to read Zaptel version information.
Zaptel Version: Unknown
Echo Canceller: Unknown
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels to configure.
ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25)
My zaptel.conf file is in /etc...
2003 May 01
1
TDM cards and Asterisk
...h device or
address (6)
/lib/modules/2.4.20/misc/wcfxo.o: post-install wcfxo failed
/lib/modules/2.4.20/misc/wcfxo.o: insmod wcfxo failed
but the module seems to load OK)
"modprobe wcfxs"
"ztcfg -vv"
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Slaves: 05)
Channel 06: FXO Kewlstart (Default) (Slaves: 06)
Channel 07: FXO Kewlstart (Defa...
2010 Jan 18
0
TDM2400P "Unable to set SW Companding on channel .."
...the TDM is not transfering tone from the PSTN line ,please help me in this .
?
?
This is my output when i type this commands:
#modprobe wctdm24xxp
# dahdi_cfg -vv
DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0.2
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Echo...
2006 May 04
2
Unable to get TDM400p working
...e to machine. The hardware is Pentium 4
all-Intel chipset mainboard.
The one difference here is I'm trying CentOS. I've been through the
problems getting Zaptel to compile with the error in spinlock.h. I got
to...
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels configured.
and thought I was home free. Wrong!
zttool recognizes the card properly and reports status "OK&quo...