search for: tdm400

Hi, all Did anyone tried TDM400 card on old main board (Intel 440LX chipset -- PII)? The reason I am asking is because TDM400 needs PCI2.2 and main board is PCI2.1 I do not want to upgrade yet. Thanks, Rudolf

Hi all !!! I would like to install asterisk in Xen domU using TDM400 hardware. Somebody know a howto or tutorial about that ? Thanks in advance roberto -- Ing. Roberto Pereyra ContenidosOnline http://www.contenidosonline.com.ar

When configuring a TE410P which is only attached to a single E1 together with a TDM400, how should one count the channels for the next Zap interface? Must I put 4 span lines in zapata.conf and define all channels up to 124? thus having the TDM400's start at 125? Or can I comment out the 3 spans I don't use and start at channel 32 for the TDM400? (this would get nasty when ad...

I recently swapped 2 FXO modules on to what had previously been a 4 FXS version of the TDM400 board. The FXS ports are recognized - the FXO ports don't appear to be recognized (ie modprobe wcfxo and ztcfg both say channel 1 isn't there). Has anyone experienced this problem? All software is current as of this AM. If the old FXS modules are re-installed all works just dandy (other...

Hi all, We have tested both tdm400 and BRI 1 port HFC based with mISDN driver and with both cards we have the same problem... so probably it's due to our misconfiguration, but we couldn't find anything useful on google. With TDM400 we can place and receive calls, but if we receive a call from TDM400 and we reject it from a...

Hello, I have the following configuration : E100P -> * -> TDM400 -> Modem When I receive FAXes, about 20% of them are corrupted : pages are not always complete. If the fax is complex or with numerous pages, it's usually a mess. Before that, I was using spandsp with success. Unfortunately it's too picky with some broken fax (training failed). Since t...

Has anyone had success with the TDM400 in production? I have multiple boxes where these cards lock up and the only thing that will fix them is to unload *, modprobe -r wctdm, modprobe wctdm, load asterisk. Does not matter if it is a FXS/FXO module. I know this topic has been discussed many times before, but my questions is not "is...

Hi, I have a FAX machine connected to a TDM400 card FXS port. When I receive a fax call through X100 and transfer it to that extension, the FAX machine display REC, but nothing happen (no fax received). There is something special to be done for this configuration? Thanks, Dan

I have an analogue line connected to an FXO module on a TDM400. I want to use the FXO line only for outgoing calls - incoming calls are answered by other equipment, but even if I don't specify an "s" extension, the FXO module still seizes the line for all incoming calls. Is it possible to configure the FXO module to ignore ring events completely?...

I've got an old Dell Optiplex (Pentium-II, 1998 Vintage) which is successfully running an X100P card. I'm hoping to upgrade to a TDM400. Has anybody tried running these cards in old Optiplex machines? I'm not particularly worried about horsepower - more about the motherboard having a PCI bus that's able to power up the card... -Ronan

Today I had channel 1 on my TDM400 go to sleep, verified by pluggin in known good telco lines in various combinations on channel 1 through 4 - problem is channel 1, not anything external. So after seeing lots of stuff on the list re: TDM400's I power cycled, removed board and let linux say nothing's home, replaced board,...

And if that ain't confusing I don't know what would be. I bought a TDM400 with two modules (FXO, FXS) a couple or so years ago and ended up never using it. Passed it along to a friend who is having some problems with it. (He isn't on this list.) We've both tried searches using Google but haven't been able to find anything that helps. So this is more a q...

Hello, I have a TDM400 with 2 FXS modules and 2 FXO modules, as follows: Zap/1 - internal phone Zap/2 - internal modem Zap/3 - exchange Zap/4 - exchange Recently I upgraded zaptel (and kernel modules) from 1.0.9-1.1 to 1.0.9.1 and upgraded asterisk to 1.0.9.dfsg.1-3, which are Debian versions for Debian/sarge of the pa...

...short beeps when someone another extension is picked up, presumably this lets you know if someone is trying to listen in.. Everything works, except the VTech now makes the three beeps everytime you try to use it, even if another extension is in use. It seems as though the VTech phone trhinks the TDM400 is another extension - and i guess i can kinda see its point :) It becomes annoying though because I have to put up with these 3 beeps everytime I answer the phone or check messages. The beeps seem to mess up DTMF occassionally too, messing me up when I'm entering my password and so on. Anyo...

Hi, We've got troubles trying to connect a Brother 8360P to a TDM400 FXS board. Design is : PSTN ------ Junghanns QuadBRI --------- Digium TDM400 ----------- Brother fax As you can guess, QuadBRI and TDM400 are plugged into 1.0.10 Asterisk server. - from Asterisk console, we can observe calls reaching the fax machine but the fax never answer - when we substitute...

I need a cheap platform for installing a tdm400. Could someone tell me if the cheap cpubuilders computer at sams $179 (cbs110l) is pci 2.2 compliance? I ve got a compaq deskpro en 700 that does not seems to be compliant and I need to change it to start developing. Thanks for the help. Computer Model: CBS110L ------------------------...

Hi, all I have installed TDM400 card. I can see it is there (lspci). But Asterisk does not find it. phonebox2*CLI> zap show status No Zaptel interface found. I assume that driver is not loaded, but I am sure I have installed it (I compiled zaptel and then re-build asterisk and did make install for both zaptel and asterisk)...

I use a TDM400 card to interface with my telco. I used asterisk voice mail. However, if I'm on the telco line while another call comes in, obviously it cannot go to asterisk voice mail but instead bounces to the Telco voice mail. Is there any means by which I can get asterisk detect the Message Waiting...

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it wi...

Folks, I recently swapped a TDM400 FXS card that was working perfectly into a new server (running recent CVS), and it's either misbehaving (unlikely), or I've missed something obvious (much more probable). Everything seems to be working, but I can't get any dialtone from it when I plug a phone into any of the 4 ports!! A...