search for: fxos

I've been using my Asterisk (At my house - 2 modem-type fxos, and an assortment of SIP endpoints for phones) for about 5 weeks now, and I've been really happy with it, but I'm still having an echo problem that I've exhausted google with, and can't get straight... I think I've determined that because I'm using $7 voice modem clones f...

Anyone used voicetronix FXOs with * ? I'm interested to know how they compare with eg TDM400P. Specifically I'm interested in how good the echo canceller is. -Dan

...ep doing it.. any leads on where to look for what's causing it? here's what I see when I 'show channels' Zap/37-1 s@from-pstn:1 Up Bridged Call(Zap/38-1) Zap/38-1 s@macro-dialout-trun Up Dial(ZAP/g0/16509524400) 37 & 38 are the 1st two FXOs on the system, connected to a channel bank (CAC ABI) with POTS lines. When I spy on the channels, there is no activity (audio).... any leads as to where I should be looking to try to track this down? I'm unable to actually get an outbound trunk via the incoming lines, so I don't think it...

...with Asterisk? If so, would you be willing to shoot me a note with your current configs? I'm not very familiar with CAC/etc, and it would save me countless hours of muddling through .. :) Any others tips you can give me on these banks would be very appreciated. Also, any cheap source for FXOs on them? I'm told they're hard to come by .. Thanks again, -d

Hi all, Theoretically, I know it's possible, but is any using multiple tdm400ps (fxo) in single * box? In a production environment? Any gotchas aside form irq sharing? Thanks Ryan

...oked at Asterisk Mall says that "The TrueLine SMB PBX is perfect for the small office providing service for up to 28 Telco lines". This is a 1U Rack Mount Single T1 Asterisk Appliance. Question: Does it mean it has 7 PCI bus and takes 7x4=28 channels (if they used 7 TDM400P card with 4 FXOs on each), then only they can use this Asterisk box with SIP or H323 phones, no analog/digital phones. Is this right? Question: I believe TDM400P is full length (with FXO or FXS cards, without, it is half length) card. How does it fit to 1u rack with FXOs on it? Or Am I confused with 1U rack size?...

Hi All - I pulled from a working system a TDM400 with one s110 fxs and three x100 fxos. I put it into a new box and the fxs no longer works. The fxos work just fine. I thought it was odd, but I chalked it up to a random chance failure and ordered another s110. The replacement doesn't work either, and now I'm confused. dahdi_scan recognizes the s110, but it says it fails....

Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking for a CAPI compatible active BRI adapter capable of NT mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses requirements. However, at EUR 1387 for four BRI interfaces, it does not come cheap. Are there other users of sim...

Does anyone on-list have direct experience with the new analog cards from Sangoma? I'm thinking about FXOs with echo cans. Need 2-4 ports but don't want to go through another TDM400 style experience. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc. mgraves@m...

Hi All, I'd really like to see a show of hands with regard to people's experience with FXO interfaces. I own a few X100p cards and have had nothing but problems with them. I also took part in Sipura's beta program, for the SPA-3000. While it can be an improvement over the X100p, it presently has echo problems that make it unusable. Sipura has not acknowledged the problem ( at least

I have a TMD400 card installed in a PC with one fxs (installed in slot 2) and two fxos (installed in slots 3 & 4).? fxos work fine but I am unable to get a dial tone for any devices connected to the fxs.? I have correctly connected the power supply to the card and I have even tried moving the card from slot 1 to 2 on the board. Below is from the console when I try to route a cal...

Been using a few different FXO interfaces (X100P, Voicetronix, and SPA-3000) at a couple sites and they've all run into nasty issues at times. I'm looking at moving one of my offices and am in the market for a solution for connecting 4 FXOs. I got excited about recent offerings from Digium and Sangoma in the way of new cards but I hear they're causing troubles for more than a few. What's the Cadillac in this market? Paul -- Paul Dugas, Computer Engineer Dugas Enterprises, LLC paul@dugas.cc phone: 404-...

helleo ,I have one wildcard installed on the server,and configured it.there are two modules which both FXOs .all configurations complete,and when we start asterisk use "asterisk -vvvvc",it shows asterisk ready,no warnings.afterwards when the sever connected to the PSTN in the one port which configured,and have a phone line connected to the other port then run "zttool",however it show...

Hi, I have pushed my radio player for FxOS to GitHub: https://github.com/emilis/worldradioplayer Currently it uses a precompiled data from http://dir.xiph.org/yp.xml: https://raw.github.com/emilis/worldradioplayer/master/static/js/data/xiph.org.stations.json I will have to switch to asynchronous station list loading and filtering in the n...

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right now, I'm not interested i...

We just bougth a tdm2400p with all the modules for FXO, but we are having some troubles with the card, cause it aparently is stripping some digits from the dialed number, we tested the same server with a tdm400 and everything worked as expected. We?ve already added "w" before the dialed number with no results, is there any way to solve, is it a bug thanks

...module on a tdm400p. If an incoming call comes in on this line, can */zaptel send Flash to telco via the FXO module? If it could, then an incoming call could be 'transfered' to a cell-phone, for example, with a single analog line. (where 'transfer' is really telco 3-way). The FXOs on TalkSwitch devices do support this feature. Small businesses enjoy it, because it allows incoming calls to transfered to home/cell without tying up 2 lines. I haven't seen options for zapata.conf that suggest this is supported on fxo interfaces. If it's not supported, is this somet...

Need to add some fxs and fxo ports behind a fonebridge2 box any recommendations a channel bank Thanks Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070829/1131cad4/attachment.htm

I'm rolling out an installation with snom 360s in the near future. Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I have the 360's set up to subscribe and notify for the line use lights, which works like a charm for interoffice calling (between the 360's, anyway. The IAXy, 200 and, softphone...

Is the Sipura 3000 the only way to interface a remote pstn line and connect incoming calls to Asterisk? I have a location connected by network that has a phone line, when the room is occupied I want the line ti ring there as normal, but when the employee is travelling I want the line to be conencted to a ATA that then feeds it as an incoming pstn line to the pbx located at my office so it can