Hi All, Sorry if this has been around a millions times.. I have been off this list for a few months now.. I have installed the latest asterisknow (upgraded asterisk to 1.6 as well) and I am having a hard time getting my X100P and TDM400P working.. Its all new to me with dahdi because my old server is still running Asterisk 1.0.2 so there have been lost of changes.. Can someone point me in the right direction for setting up dahdi on asterisk now? I cant seem to get anything to even show when running "dahdi show channels" from the CLI.. Obviously I need to make it work in a way that will be compatible with asterisknow and the web gui.. Here are the details of my cards.. [root at pbx asterisk]# dahdi_cfg -vv DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.4 Echo Canceller(s): MG2 Configuration ===================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Loopstart (Default) (Echo Canceler: mg2) (Slaves: 02) 2 channels to configure. Setting echocan for channel 1 to mg2 Setting echocan for channel 2 to mg2 [root at pbx asterisk]# dahdi_scan [1] active=yes alarms=OK description=Wildcard X101P Board 1 name=WCFXO/0 manufacturer=Digium devicetype=Wildcard X101P location=PCI Bus 00 Slot 15 basechan=1 totchans=1 irq=11 type=analog port=1,FXO [2] active=yes alarms=OK description=Wildcard TDM400P REV E/F Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV E/F location=PCI Bus 00 Slot 14 basechan=2 totchans=4 irq=11 type=analog port=2,FXS port=3,none port=4,none port=5,none Thanks in advance..
WipeOut wrote:> Hi All, > > Sorry if this has been around a millions times.. I have been off this > list for a few months now.. > > I have installed the latest asterisknow (upgraded asterisk to 1.6 as > well) and I am having a hard time getting my X100P and TDM400P working.. > > Its all new to me with dahdi because my old server is still running > Asterisk 1.0.2 so there have been lost of changes.. > > Can someone point me in the right direction for setting up dahdi on > asterisk now? I cant seem to get anything to even show when running > "dahdi show channels" from the CLI.. > > Obviously I need to make it work in a way that will be compatible with > asterisknow and the web gui.. > > Here are the details of my cards.. > > [root at pbx asterisk]# dahdi_cfg -vv > DAHDI Tools Version - 2.1.0.2 > > DAHDI Version: 2.1.0.4 > Echo Canceller(s): MG2 > Configuration > =====================> > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) > Channel 02: FXO Loopstart (Default) (Echo Canceler: mg2) (Slaves: 02) > > 2 channels to configure. > > Setting echocan for channel 1 to mg2 > Setting echocan for channel 2 to mg2 > > > > [root at pbx asterisk]# dahdi_scan > [1] > active=yes > alarms=OK > description=Wildcard X101P Board 1 > name=WCFXO/0 > manufacturer=Digium > devicetype=Wildcard X101P > location=PCI Bus 00 Slot 15 > basechan=1 > totchans=1 > irq=11 > type=analog > port=1,FXO > [2] > active=yes > alarms=OK > description=Wildcard TDM400P REV E/F Board 5 > name=WCTDM/4 > manufacturer=Digium > devicetype=Wildcard TDM400P REV E/F > location=PCI Bus 00 Slot 14 > basechan=2 > totchans=4 > irq=11 > type=analog > port=2,FXS > port=3,none > port=4,none > port=5,none > > > Thanks in advance.. > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >I managed to get it working.. Not sure what I did exactly but its working.. :)