thr3ads.net - asterisk users - [asterisk-users] TE121 on Asterisk [Feb 2009]

If this information is useful, please help other people find it:
Share via:

Oguzhan Kayhan

2009-Feb-25 15:00 UTC

[asterisk-users] TE121 on Asterisk

Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a
1.4.23.1 asterisk with dahdi 2.1.0.4
Actually first everything went on well and i managed to see my card on dahdi.
Here's the output:
#asterisk# dahdi_hardware
pci:0000:04:08.0     wcte12xp+    d161:8000 Wildcard TE121

and this is the scan:
--------------------------
asterisk# dahdi_scan
[1]
active=yes
alarms=RED
description=Wildcard TE121 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Wildcard TE121 with VPMADT032
location=PCI Bus 04 Slot 09
basechan=1
totchans=24
irq=17
type=digital-T1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
--------------------------
 and this is the proc output

asterisk# cat /proc/dahdi/1
Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) B8ZS/ESF RED
        IRQ misses: 1

           1 WCT1/0/1 Clear RED (EC: MG2)
           2 WCT1/0/2 Clear RED (EC: MG2)
           3 WCT1/0/3 Clear RED (EC: MG2)
           4 WCT1/0/4 Clear RED (EC: MG2)
           5 WCT1/0/5 Clear RED (EC: MG2)
           6 WCT1/0/6 Clear RED (EC: MG2)
           7 WCT1/0/7 Clear RED (EC: MG2)
           8 WCT1/0/8 Clear RED (EC: MG2)
           9 WCT1/0/9 Clear RED (EC: MG2)
          10 WCT1/0/10 Clear RED (EC: MG2)
          11 WCT1/0/11 Clear RED (EC: MG2)
          12 WCT1/0/12 Clear RED (EC: MG2)
          13 WCT1/0/13 Clear RED (EC: MG2)
          14 WCT1/0/14 Clear RED (EC: MG2)
          15 WCT1/0/15 Clear RED (EC: MG2)
          16 WCT1/0/16 Clear RED (EC: MG2)
          17 WCT1/0/17 Clear RED (EC: MG2)
          18 WCT1/0/18 Clear RED (EC: MG2)
          19 WCT1/0/19 Clear RED (EC: MG2)
          20 WCT1/0/20 Clear RED (EC: MG2)
          21 WCT1/0/21 Clear RED (EC: MG2)
          22 WCT1/0/22 Clear RED (EC: MG2)
          23 WCT1/0/23 Clear RED (EC: MG2)
          24 WCT1/0/24 HDLCFCS RED
-----------------

I want to change it to E1 instead of T1.
here comes the problem.
Default system.conf under /etc/dundi is:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
echocanceller=mg2,1-23
loadzone        = us
defaultzone     = us
------

to make it work as E1, if i write a new span like span=1,1,0,ccs,hdb3,crc4
i got the following error when i type dahdi_cfg
dahdi_cfg -vvvv
DAHDI Tools Version - 2.1.0.2

DAHDI Version: 2.1.0.4
Echo Canceller(s): MG2
Configuration
=====================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
Channel 16: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)

24 channels to configure.

DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)




How can i set a working E1.
Any examples will welcome..

Eric Wieling, Asteria Solutions Group

2009-Feb-25 15:05 UTC

head link

[asterisk-users] TE121 on Asterisk

E-1s are 30 channels with D-Channel on 16.

> to make it work as E1, if i write a new span like span=1,1,0,ccs,hdb3,crc4
> i got the following error when i type dahdi_cfg
> dahdi_cfg -vvvv
> DAHDI Tools Version - 2.1.0.2
> 
> DAHDI Version: 2.1.0.4
> Echo Canceller(s): MG2
> Configuration
> =====================> 
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> 
> Channel map:
> 
> Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
> Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
> Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
> Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
> Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
> Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
> Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
> Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
> Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
> Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
> Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
> Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
> Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
> Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
> Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
> Channel 16: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 16)
> Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
> Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
> Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
> Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
> Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
> Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
> Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
> Channel 24: D-channel (Default) (Slaves: 24)
> 
> 24 channels to configure.
> 
> DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)
> 
> 
> 
> 
> How can i set a working E1.
> Any examples will welcome..
> 
> 
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Eric Wieling * Asteria Solutions Group * Huntsville, AL
Call centers * IVRs * Enterprise PBXs * Conferencing applications
256-705-0277 * http://www.asteriasgi.com/ * sales at asteriasgi.com

Doug Lytle

2009-Feb-25 15:12 UTC

head link

[asterisk-users] TE121 on Asterisk

Oguzhan Kayhan wrote:> I want to change it to E1 instead of T1.
> here comes the problem.
>   
If it's anything like the older cards, there is a jumper on the card 
that sets it to T1/E1

Doug


-- 
 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."

Jared Smith

2009-Feb-25 15:16 UTC

head link

[asterisk-users] TE121 on Asterisk

On Wed, 2009-02-25 at 17:00 +0200, Oguzhan Kayhan wrote:> I want to change it to E1 instead of T1.
To change it from T1 mode to E1 mode, you need to move the jumper on the
card.  (If you don't have physical access to the card, you can also
override the jumper with a parameter to the kernel module.)


-- 
Jared Smith
Digium, Inc. | Training Manager

Oguzhan Kayhan

2009-Feb-25 15:28 UTC

head link

[asterisk-users] TE121 on Asterisk

> E-1s are 30 channels with D-Channel on 16.
>
>Ok, so i replaced the channels as D-chan 16
And now i get the following error.
This card is suppose to be both e1-t1 as i understand...Or did i receive a
card with only T1 support??
How will i configure it to work with e1?



dahdi_cfg -vvvvvvv
DAHDI Tools Version - 2.1.0.2

DAHDI Version: 2.1.0.4
Echo Canceller(s): MG2
Configuration
=====================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: mg2) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)

30 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
Setting echocan for channel 9 to mg2
Setting echocan for channel 10 to mg2
Setting echocan for channel 11 to mg2
Setting echocan for channel 12 to mg2
Setting echocan for channel 13 to mg2
Setting echocan for channel 14 to mg2
Setting echocan for channel 15 to mg2
Changing signalling on channel 16 from Clear channel to HDLC with FCS check
Setting echocan for channel 16 to mg2
Setting echocan for channel 17 to mg2
Setting echocan for channel 18 to mg2
Setting echocan for channel 19 to mg2
Setting echocan for channel 20 to mg2
Setting echocan for channel 21 to mg2
Setting echocan for channel 22 to mg2
Setting echocan for channel 23 to mg2
Changing signalling on channel 24 from HDLC with FCS check to Clear channel
DAHDI_CHANCONFIG failed on channel 25: No such device or address (6)






>> to make it work as E1, if i write a new span like
>> span=1,1,0,ccs,hdb3,crc4
>> i got the following error when i type dahdi_cfg
>> dahdi_cfg -vvvv
>> DAHDI Tools Version - 2.1.0.2
>>
>> DAHDI Version: 2.1.0.4
>> Echo Canceller(s): MG2
>> Configuration
>> =====================>>
>> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>
>> Channel map:
>>
>> Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
>> Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
>> Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
>> Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
>> Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
>> Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
>> Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
>> Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
>> Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
>> Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
>> Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
>> Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
>> Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
>> Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
>> Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
>> Channel 16: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 16)
>> Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
>> Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
>> Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
>> Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
>> Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
>> Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
>> Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
>> Channel 24: D-channel (Default) (Slaves: 24)
>>
>> 24 channels to configure.
>>
>> DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)
>>
>>
>>
>>
>> How can i set a working E1.
>> Any examples will welcome..
>>
>>
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> Eric Wieling * Asteria Solutions Group * Huntsville, AL
> Call centers * IVRs * Enterprise PBXs * Conferencing applications
> 256-705-0277 * http://www.asteriasgi.com/ * sales at asteriasgi.com
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Apparently Analagous Threads

Search for more apparently analagous threads

asterisk users - Feb 2009 - TE121 on Asterisk

[asterisk-users] TE121 on Asterisk

[asterisk-users] TE121 on Asterisk

[asterisk-users] TE121 on Asterisk

[asterisk-users] TE121 on Asterisk

[asterisk-users] TE121 on Asterisk

Apparently Analagous Threads