search for: x101p

can somebody that has these hardwares(X101P and S400P) working on his asterisk system please assist.................. you can send the solution to austino@skannet.com..... the error message is what i have below. ---------- Forwarded message ---------- Date: Thu, 1 May 2003 21:01:21 +0100 (WAT) From: austino@skannet.com To: asterisk-user@...

When x101p clone receive ring signal from phone line, my voip phone start ringing. But, if caller hang-up at some time, phone continues to ringing 10 second more. How can I shorten that time? Pause betwen incoming rings on my phone line is 4s, so when x101p clone (wcfxo driver) do not receive next ring signa...

To all: I am researching the feasibility of replacing our current PBX (ATT Partner Plus) with an * PBX. I have purchased an X101P card and I have * running of a FC2 machine. The X101P is connected to an extension on our current PBX. Many archives exists regarding X101P cards but I just need some guidance. First the X101P did not detect a ring, so I found an email where someone reconfigured the MINPEGTIME by decreasing...

Wow ! No reply... May be I must talk about X100P instead of X101P ? Is someone has yet encountered this kind of "no sound" problem when bridging two FXO lines like this (first as input, second as output) ? Any idea ? TIA. Best Regards, Francois BERGERET, France. ----- Original Message ----- From: "Francois BERGERET" <f6hqz-m@hamwlan.net...

X101P with Ambient md3200 chip on it, with the zaptel wcfxo driver.... Just an indication of how many people have got this to work would be useful. Cheers Mark.

Hi, I have a X101P card and am running Asterisk SVN-trunk-r226890. The X101P card seems to be identified properly: debian:/usr/src/dahdi-tools# dahdi_hardware pci:0000:01:01.0 wcfxo+ e159:0001 Wildcard X101P debian:/usr/src/dahdi-tools# dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r7409 DAHDI Version: S...

I have a normal backup phone (and an alarm panel) sharing the POTS line with the Digium X101P FXO: | | Wall |>---+------X101P FXO as Zap/5 | | | Phone & Alarm Whenever the Phone is used, Asterisk sees a 'false ring' signal immediately when the phone is hung up. The Alarm panel dials out nightly at around 1AM, and each time it completes the call, A...

.... This was on my desktop machine and the sound card stopped working. I turned the system off and moved the sound card to another slot to give it a different IRQ. On reboot, the modules zaptel, wcfxo, and wcusb all load OK and asterisk starts OK but there is no dialtone on the extension and the X101P never answers. The command "show channels" shows nothing. I moved cards around, rebuilt, reloaded, rebooted... nothing worked. I bought a new system and did a fresh RH9 install. Did a cvs checkout of zaptel, asterisk, zapata, and libpri. The problem persists on the new machine. The ne...

I am still having unacceptable echo on my X101P and twidling with the rx/tx gain levels and echo settings appears to have no discernable effect. Some questions for those who may have more significant electrical engineering background than I. 1. This impedance match thing ... will it affect this solution having other phones in parallel with the...

Could someone please assist me soonest. when i run asterisk with one X101P card and a S400P card asterisk will run but the card will not work.this is the message i get: [format_jpeg.so] => (JPEG (Joint Picture Experts Group) Image Format) == Registered format 'jpg' (JPEG (Joint Picture Experts Group)) [cdr_csv.so] => (Comma Separated Values CDR Backend)...

Let me start by saying no, this is not the normal stupid echo question :) I currently have a SIP device and an X101P, and have had the usual echo issues and have played around with the various solutions, none of which are quite perfect (understandably).. however, my girlfriend is a little more picky than I am when she uses the phone, so I'm considering a Digium TDMXXB card for the house. My questions to ever...

Hi, I'm new to *. I just installed my X101P card with * from the source on Mandrake 10.0 and I test it. Everything seems to work fine. When I call at my home office all the demo ivr seem to work. But I have one question regarding * using /dev/dsp0. I only have one sound card on my system and it has to be use by my personnal PVR called MythTV...

Hi, Does anyone have any experience connecting Asterisk to a Meridian system using an ATA2 and x101p? The basics work -- I can make outbound calls, receive inbound, and use flash to transfer calls, but certain things do not work, specifically with calls from internal extensions. - Does the Meridian/ATA2 pass any kind of callerid info? We do not have external callerid, but I'm not even getti...

Since the X100P/X101P/Clone cards does not work in all countries that use DTMF based Caller-ID systems, I've developed a hardware that you connect to a serial port and the PSTN. You then run a perl script "cid_logger.pl" as a daemon, and modify extensions.conf to call an agi script whenever a call come...

I want to speed-up dialing on X101P clone (Ambient modem). I probably must change wcfxo.c, but what line to change? (On usual modems, I can type ATS11=50 to get tone dialing much faster (50ms instead of default 90ms). After that, I can write configuration to nvram (AT&W) to be permanent)

...(see other post). At least the Master Abort doesn't bring the whole machine down. What I can't tell is why WE get the Master Aborts in the first place.... Speculation would be good! Any ideas? Cheers Mark. On 17 Aug 2005, at 07:16, VoIP Newbie wrote: > Dear Mark, > > I got 3 X101P clone cards from 3 different vendors. One of them has > the same problem like yours. Another one has echo issue. Only one from > www.broad-tel.com works fine for me. > > You may want to contact the vendor and get one for yourself instead of > modifying ZAPTEL software. > > Newb...

...(see other post). At least the Master Abort doesn't bring the whole machine down. What I can't tell is why WE get the Master Aborts in the first place.... Speculation would be good! Any ideas? Cheers Mark. On 17 Aug 2005, at 07:16, VoIP Newbie wrote: > Dear Mark, > > I got 3 X101P clone cards from 3 different vendors. One of them has > the same problem like yours. Another one has echo issue. Only one from > www.broad-tel.com works fine for me. > > You may want to contact the vendor and get one for yourself instead of > modifying ZAPTEL software. > > Newb...

...g has a buy it now of $29.95 and says There are 3 types of cards Asterisk would recognize: *Screenshots from the official, original driver install Cheap "OEM X100P","Clones", "Compatibles", Knock-Offs Found a Wildcard FXO: Generic Clone The X101P (note the 101, not 100) is a Low-end version of X100P which uses low grade chips Found a Wildcard FXO: X101P Authentic, Original X100P Speaks for Itself! Found a Wildcard FXO: X100P From what I gather clone's and knockoffs will have trouble with callerid. Is t...

Hi, I've just added an X101P FXO card to my asterisk machine. The card is detected ok but zttool always shows it in a RED alarm state, which I understand means that it doesn't detect the line. I've connected the card via the line socket to my analogue line using the cable that came with the card (and have also tried o...

...I would like but now seems usable in most ways and more then I expected in other ways. I wanted a home PBX system, that would let me treat different callers different ways depending on CID. I initially bought the Digium developer's kit to try things out. That's a single port TDM400 and a X101P. I've added another X101P. One X101P terminates in a Vontage Cisco ATA-186. The other terminates with Qwest. The TDM400 is connected to both a TDD and a cordless phone. I also have a softphone connected along with 2 DID numbers through Voicepulse. I have a second Asterisk system outside my...