Displaying 20 results from an estimated 149 matches for "dahdi_cfg".
2011 Apr 13
2
Problems With DAHDI on Ubuntu
...oth exibiting this problem. 1
has a 4 port
FXO digium card, the other an 8 port.
For some reason when the machine reboots, the dahdi drivers are not properly
loaded. Then asterisk
ends up starting without dahdi support. I've tried everything that I can
think of, even to the point
of running dahdi_cfg in the asterisk startup script before asterisk itself
is started, but it doesn't help.
To fix it, all i have to do is login and run
dahdi_cfg
/etc/init.d/asterisk restart
but that's a pain to have to do after every reboot. I've never had this
problem with asterisk systems in
the past...
2010 May 23
2
Dahdi problems with kernel 2.6.32
Hi. I am having problems with dahdi using kernel 2.6.32. I am using
2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv
++ dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r8670
DAHDI Version: SVN-trunk-r7445M
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves:...
2014 Feb 12
1
Problem/error with DAHDI tools 2.9.0.1
Hello,
Getting this error on dahdi_cfg. Reverting to 2.8 the error goes away:
*line 15: Unable to create 'dahdi_cfg' mutex.*
Is this a problem?
Thanks in advance.
Full detail:
[ebox]> dahdi_cfg -vvvvvvv
DAHDI Tools Version - 2.9.0.1
DAHDI Version: 2.9.0
Echo Canceller(s): HWEC
Configuration
======================
SPAN...
2011 Aug 13
3
Echo problem in the analoge lines
Hi All;
To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory?
echocanceller=mg2,1-16
1) How can I know if the digium card supporting echo cancellator?
2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo
2020 Sep 06
0
dahdi_cfg -vvv error , PRI show spans command not found
dahdi_cfg -vvv error `cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or directory`
PRI show spans --command not found
test call not working.
-- dahdi_genconf -vvv
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/assigned-spans.conf
cut: &...
2011 Jun 14
1
How to set a HA8 board + B400M in NT mode ?
Hi,
1. Is there any manual entry about modprobe's options relative to a given
Dahdi driver (wctdm24xxp, for instance) ?
2. When loading a wctdm24xxp driver, is there any parameter to pass to
modprobe to configure a span in NT/point to point mode ?
3. After running dahdi_cfg -vvvvv , I can read with dmesg :
[ 1986.289277] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 0 span 1 in
TE mode with termination resistance ENABLED
[ 1986.337269] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 2 span 2 in
TE mode with termination resistance ENABLED
[ 1986.385269] wctdm24xxp 0...
2009 Mar 15
1
No hardware timing source found in /proc/dahdi
...-4
channels=1-4
/etc/dahdi/init.conf:
MODULES="$MODULES wctdm"
/etc/dahdi/modules
# Digium TDM400P: up to 4 analog ports
wctdm
# /etc/init.d/dahdi start
Loading DAHDI hardware modules:
wctdm: modprobe wctdm
No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: /usr/sbin/dahdi_cfg
# /usr/sbin/dahdi_cfg -vvvvvvvv
DAHDI Tools Version - 2.1.0.2
DAHDI Version: 2.1.0.4
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Cancel...
2009 Jul 03
2
Problem configuring TDM400
Folks,
I have a Xen Asterisk VM with a TDM400 card. When I try to run
dahdi_cfg, I get:
tempest:~# dahdi_cfg -vvv
DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03)...
2010 May 26
1
[Dahdi] "DAHDI_CHANCONFIG failed on channel 1"?
Hello
I'm trying to install Dahdi through source code on a Fedora 13 host
to use an OpenVox PCI card with a single FXO port, but dahdi_cfg -vv
isn't happy.
1. After successfully running "make all; make install; make config", I
edited /etc/dahdi/system.conf thusly:
loadzone=fr
defaultzone=fr
fxsks=1
2. Then ran "dahdi_cfg -vv" which says:
-------------
DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0
Echo Ca...
2010 May 28
1
[Dahdi/system.conf] "fxsks = 1" deprecated?
.../system.conf
loadzone = fr
defaultzone = fr
fxsks=1
=====================
# /etc/init.d/dahdi start
Loading DAHDI hardware modules:
wctdm: [ OK ]
/usr/share/dahdi/waitfor_xpds: Missing astribank_is_starting
No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: DAHDI_CHANCONFIG failed on channel 1: No such
device or address (6)
[FAILED]
=====================
Uncommenting that line solves the issue:
=====================
# /etc/init.d/dahdi start
Loading DAHDI hardware modules:
wctdm: [ OK ]
/usr/share/dahdi/waitfor_xpds: Missing astribank_is_star...
2011 Oct 06
1
dahdi show status command not avilable in CLI
Hi All,
I have installed asteriskNow with Asterisk 1.6.2.11 and FreePBX
2.7.0.10. I have configured x100p fxo card in my asterisk box. But in my
cli mode i am not getting the command *"dahdi show status"*
Output of CLI :
astrisks*CLI> *dahdi show status*
No such command 'dahdi show status' (type 'core show help dahdi show' for
other possible commands)
I
2015 Oct 22
2
oslec echo cancellation
On Thu, 22 Oct 2015 15:06:59 +0300
Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> On Wed, Oct 21, 2015 at 01:33:27PM -0200, Ethy H. Brito wrote:
> >
> > Hi
> >
> > Who should insert dahdi_echocan_oslec.ko module in Ubuntu 14.04?
>
> dahdi_echocan_oslec should be built by default. What you may miss is the
> 'echo.ko' (OSLEC) kernel module.
2011 Jun 14
0
How to set a HA8 board + B400M in NT mode ? [SOLVED]
...ual entry about modprobe's options relative to a
>> given Dahdi driver (wctdm24xxp, for instance) ?
>>
>> 2. When loading a wctdm24xxp driver, is there any parameter to pass to
>> modprobe to configure a span in NT/point to point mode ?
>>
>> 3. After running dahdi_cfg -vvvvv , I can read with dmesg :
>>
>> [ 1986.289277] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 0 span 1
>> in TE mode with termination resistance ENABLED
>> [ 1986.337269] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 2 span 2
>> in TE mode with termination re...
2014 Jan 30
0
DAHDI-Linux and DAHDI-Tools 2.9.0 Now Available
...pan_assignments" tool
dahdi_span_types: allow defaults + overrides
Change span-type.conf generation policy
Russ Meyerriecks (2):
wcte13xp: Teach tools about te131 te132 products
dahdi.init: Don't exit on lack of /etc/dahdi/system.conf
Shaun Ruffell (8):
dahdi_cfg: Wait for all spans to be assigned.
dahdi_span_config: Do not run auto span configuration if spans are auto assigned.
dahdi_handle_device, dahdi_span_config: Check for auto_assign_spans only when ACTION is add.
dahdi_genconf: Add 'modules', 'spantypes', and '...
2014 Jan 30
0
DAHDI-Linux and DAHDI-Tools 2.9.0 Now Available
...pan_assignments" tool
dahdi_span_types: allow defaults + overrides
Change span-type.conf generation policy
Russ Meyerriecks (2):
wcte13xp: Teach tools about te131 te132 products
dahdi.init: Don't exit on lack of /etc/dahdi/system.conf
Shaun Ruffell (8):
dahdi_cfg: Wait for all spans to be assigned.
dahdi_span_config: Do not run auto span configuration if spans are auto assigned.
dahdi_handle_device, dahdi_span_config: Check for auto_assign_spans only when ACTION is add.
dahdi_genconf: Add 'modules', 'spantypes', and '...
2013 Nov 23
1
DAHDI Missing '/sys/bus/astribanks/drivers/xppdrv/sync'
...e-2.7.0.1+2.7.0.1, and have tried 2.6.1 and 2.8.0-rc1 and 2.8.0-rc2. ?I am following along in the ASTERISK The Definitive Guide 4th Edition and on page 116 when I issue the command $ sudo /etc/init.d/dahdi start I get the following error:
Loading DAHDI hardware modules:
? ?wctdm24xxp: done
Running dahdi_cfg: done.
Missing '/sys/bus/astribanks/drivers/xppdrv/sync'
I found some steps at?https://issues.asterisk.org/jira/browse/DAHLIN-325?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
Here is the output of the commands listed there:
$ sudo lspci -d d161:* -v
04:01.0 Ethernet c...
2014 Jan 24
0
DAHDI-Linux and DAHDI-Tools 2.9.0-rc1 Now Available
...pan_assignments" tool
dahdi_span_types: allow defaults + overrides
Change span-type.conf generation policy
Russ Meyerriecks (2):
wcte13xp: Teach tools about te131 te132 products
dahdi.init: Don't exit on lack of /etc/dahdi/system.conf
Shaun Ruffell (8):
dahdi_cfg: Wait for all spans to be assigned.
dahdi_span_config: Do not run auto span configuration if spans are auto assigned.
dahdi_handle_device, dahdi_span_config: Check for auto_assign_spans only when ACTION is add.
dahdi_genconf: Add 'modules', 'spantypes', and '...
2014 Jan 24
0
DAHDI-Linux and DAHDI-Tools 2.9.0-rc1 Now Available
...pan_assignments" tool
dahdi_span_types: allow defaults + overrides
Change span-type.conf generation policy
Russ Meyerriecks (2):
wcte13xp: Teach tools about te131 te132 products
dahdi.init: Don't exit on lack of /etc/dahdi/system.conf
Shaun Ruffell (8):
dahdi_cfg: Wait for all spans to be assigned.
dahdi_span_config: Do not run auto span configuration if spans are auto assigned.
dahdi_handle_device, dahdi_span_config: Check for auto_assign_spans only when ACTION is add.
dahdi_genconf: Add 'modules', 'spantypes', and '...
2011 Apr 05
2
dahdi and linux-2.6.38
Under linux-2.6.38 I was able to compile and install dahdi, however when
I ran dahdi_cfg -vv, I got an invalid argument on my fxs port. I have
an old 400P card with one FXS and one FXO module. I have
dahdi-trunk r9868 and dahdi-tools-trunk 8670.
How can I get this to work correctly?
Thanks in advance for any ideas.
--
Your life is like a penny. You're going to lose it. The...
2009 Feb 25
4
TE121 on Asterisk
...d of T1.
here comes the problem.
Default system.conf under /etc/dundi is:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
echocanceller=mg2,1-23
loadzone = us
defaultzone = us
------
to make it work as E1, if i write a new span like span=1,1,0,ccs,hdb3,crc4
i got the following error when i type dahdi_cfg
dahdi_cfg -vvvv
DAHDI Tools Version - 2.1.0.2
DAHDI Version: 2.1.0.4
Echo Canceller(s): MG2
Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel...