Displaying 20 results from an estimated 7000 matches similar to: "TE121 on Asterisk"
2010 May 23
2
Dahdi problems with kernel 2.6.32
Hi. I am having problems with dahdi using kernel 2.6.32. I am using
2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv
++ dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r8670
DAHDI Version: SVN-trunk-r7445M
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 04: FXS Kewlstart
2009 Mar 10
3
configuring channels for dahdi
after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following:
signalling must be specified before any channels are.
CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1'
Error[4663]:
2009 Apr 11
1
asterisknow 1.5 with X100P and TDM400P
Hi All,
Sorry if this has been around a millions times.. I have been off this
list for a few months now..
I have installed the latest asterisknow (upgraded asterisk to 1.6 as
well) and I am having a hard time getting my X100P and TDM400P working..
Its all new to me with dahdi because my old server is still running
Asterisk 1.0.2 so there have been lost of changes..
Can someone point me in
2010 Sep 01
2
Freepbx + Asterisk problem - NEED HELP
Hello,
After installing on Ubuntu 10.04 using the tutorial on
http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html
I have a running instance of Asterisk.
PROBLEM: result of dahdi_cfg:
DAHDI Tools Version - 2.2.1
DAHDI Version: 2.2.1
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)
2009 Aug 25
2
Echo
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
<br>
problem.
<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
<br>
TE121B PCI express
2014 Jul 14
2
Issue with new Te133
Have a new TE133 in a dell R320.
dahdi_cfg -vvv shows:
DAHDI Tools Version - 2.9.1
DAHDI Version: 2.9.1
Echo Canceller(s):
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear
2010 Jan 14
2
Dahdi issues
Hello,
My first attempt to get dahdi running on 1.4.28... with a Rhino 8 port
modular card and a single FXS module.
Got the Rhino card installed and the machine sees it:
root at pbx:/etc/dahdi# dmesg | grep rcbfx
[ 71.985309] rcbfx 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 71.985440] rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at
ffffc90008d7c000
[ 71.985504]
2009 Nov 03
1
dahdi channel not showing up
Hi,
I have a X101P card and am running Asterisk SVN-trunk-r226890. The
X101P card seems to be identified properly:
debian:/usr/src/dahdi-tools# dahdi_hardware
pci:0000:01:01.0 wcfxo+ e159:0001 Wildcard X101P
debian:/usr/src/dahdi-tools# dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r7409
DAHDI Version: SVN-trunk-r7445
Echo Canceller(s): MG2
Configuration
======================
2008 Sep 05
1
dahdi & tdm400p: no luck
As best i could figure it out, I've installed dahdi and rc4.
My TDM400P doesn't answer fxo or fxs.
/etc/dahdi/system.conf:
loadzone = us
defaultzone=us
fxoks=1,2
fxsks=4
/etc/asterisk/chan_dahdi.conf:
[house-phones]
context=internal ; Uses the [internal] context in extensions.conf
signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel
dahdichan => 1 ;
2010 Aug 10
1
PRI D-channel bouncing
I need some help getting a system running for one of my company's
plants. I am running AsteriskNow 1.7 with Asterisk 1.6.2.10 and
FreePBX 2.8.0.2.
My D-Channel keeps bouncing. The telecom tech told me he thought that
I might be using the wrong sync source, and I think I might have been,
but I changed DAHDI system.conf to "span=1,1,0,ESF,B8ZS" (from
2011 Oct 06
1
dahdi show status command not avilable in CLI
Hi All,
I have installed asteriskNow with Asterisk 1.6.2.11 and FreePBX
2.7.0.10. I have configured x100p fxo card in my asterisk box. But in my
cli mode i am not getting the command *"dahdi show status"*
Output of CLI :
astrisks*CLI> *dahdi show status*
No such command 'dahdi show status' (type 'core show help dahdi show' for
other possible commands)
I
2013 Nov 23
1
DAHDI Missing '/sys/bus/astribanks/drivers/xppdrv/sync'
Hello group,
I am installing Asterisk on a new pc running Ubuntu 12.04.3 Server. ?I have dahdi-complete-2.7.0.1+2.7.0.1, and have tried 2.6.1 and 2.8.0-rc1 and 2.8.0-rc2. ?I am following along in the ASTERISK The Definitive Guide 4th Edition and on page 116 when I issue the command $ sudo /etc/init.d/dahdi start I get the following error:
Loading DAHDI hardware modules:
? ?wctdm24xxp: done
2010 Nov 27
1
DAHDI 2.4.0 produces HDLC errors with echo canceler
Hi,
After upgrading to DAHDI 2.4.0 from Zaptel, I noticed a lot of HDLC
errors on my console:
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Bad
FCS (8) on Primary D-channel of span 1
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Abort
(6) on Primary D-channel of span 1
These errors prevented calls from being made and received on my PRI spans.
This seems
2009 Nov 11
1
TE121 - Idle system load at ~0.3 - Bad DAHDI 2.2.0.2 behaviour ?!
Hi Asterisk Users,
We've been experiencing some tough time regarding a new Asterisk installation
connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional
VPMADT032 echo cancellation module.
For now, I'll focus on something very specific which is summarized on this
email's subject.
However, here are some general facts for the context:
- System pbxfri went
2010 Mar 07
5
dahdi-2.2.1 & kernel-2.6.32: working for anyone?
I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and
installed dahdi-2.2.1.
kernel modules loaded.
lsmod | grep wctdm
wctdm 37233 0
dahdi 194985 1 wctdm
lsmod | grep dahdi
dahdi 194985 1 wctdm
crc_ccitt 1549 2 dahdi,isdnhdlc
dmesg:
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.2.1
2020 Sep 06
0
dahdi_cfg -vvv error , PRI show spans command not found
dahdi_cfg -vvv error `cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or directory`
PRI show spans --command not found
test call not working.
-- dahdi_genconf -vvv
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/assigned-spans.conf
cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or
2009 Sep 01
7
Dahdi configuraion / error
Hello
I just updated the kernel, dahdi-linux and dahdi-tools
Im also using now asterisk 1.4.26.1
And im still with a red light (not RED/YELLOW anymore):
[root at catumbela ~]# /etc/rc.d/init.d/dahdi status
### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED
1 PRI CAS RED
2 PRI CAS RED
3 PRI CAS RED
4 PRI
2009 Mar 15
1
No hardware timing source found in /proc/dahdi
Hello all,
Ok it is Sunday afternoon and I am going crazy. I have been running in
circles so long that I can't think straight. As an example, I sent this
message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have
Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2,
DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422
at the end of installing dahdi-linux and dahdi-tools I get:
2011 Nov 11
2
10.0.0-rc1: dahdi doesn't see card
From asterisk -cvvvvv
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
== Parsing '/etc/asterisk/users.conf': == Found
-- Automatically generated pseudo channel
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:
Ignoring any changes to 'userbase' (on reload) at line 23.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi:
2014 Aug 21
0
[DAHDI] qozap instead of wcb4xxp
Hello,
?
I have a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver:
?
>dahdi_hardware -v
pci:0000:00:00.0 wcb4xxp+ 1397:08b4 Junghanns QuadBRI ISDN card
Instead of:
>dahdi_hardware -v
pci:0000:00:00.0 qozap- 1397:08b4 Generic Cologne ISDN card
There is no qozap modul in