I cannot tell for sure for any system, but we have an old Portmaster PM3
hooked-up from one port of our Sangoma A104d card, another one being from
telco.
So, yes you can "emulate" the telco from a sangoma A10x card.
Here's what I
have in my zapata.conf :
;Sangoma A104 port 1 [slot:12 bus:0 span: 1]
switchtype=national
pridialplan=unknown
signalling=pri_cpe
group=1
channel => 1-23
;Sangoma A104 port 2 [slot:12 bus:0 span: 2]
echocancel=no
pridialplan=national
signalling=pri_net
group=2
channel => 25-47
You might have noticed that the signalling is different for both port.
pri_net being the "telco emulatin" one. The clock needs also to be set
on
"master" in the wancfg utility.
Another thing, you might want to consider using a 2 port card for that,
because the clock master needs a reference and I can't tell for sure if
it'll work with a reference from another card.
Regards,
Nicolas
> Hi guys,
> Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server?
> The pbx doesn't have sip and I want to come in off of a sip trunk and
> interface with the older system.
> I know I can use a pri card to hook in to the phone network, but can I use
> this same card to feed back the signaling as if I were the phone company
> to
> the older system?
>
> Thanks,
> Tom