search for: wancfg

...nfigure HDLC and TDM Voice. this is my configure as belows: #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Sun May 15 03:11:45 GMT+7 2005 # # Note: This file was generated automatically # by /usr/sbin/wancfg program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT, Comment [interfaces...

...PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 No D-channels available! Using Primary on channel anyways 47! PRI: !! Not good - head of queue has not been transmitted yet I've tried everything i can think off with the wancfg configuration files here is my zaptel and zapata configs. span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3 bchan=32-46 dchan=47 bchan=48-62 -------------------------- zapata.conf switchtype=euroisdn signalling=pri_net group=1 channel=>1-15 channel=>17-31 group=2 si...

Hi guys, Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server? The pbx doesn't have sip and I want to come in off of a sip trunk and interface with the older system. I know I can use a pri card to hook in to the phone network, but can I use this same card to feed back the signaling as if I were the phone company to the older system? Thanks, Tom

...for asterisk). First, for the optimized HDLC to work you now have to re-compile zaptel after you finish your wanpipe installation(not a big deal). Second, you now have to configure your wanpipe spans differently depending on whether it is a PRI circuit or a RBS circuit(by selecting the DCHAN in the wancfg utility per span). Third, now the wancfg utility can setup the startup order of the spans, taking away an extra step that you previously had to do. After finishing the installation and getting Asterisk back up and running I tried both a D4/AMI circuit and an E&M Wink start circuit and found t...

...using sangoma card. connected to E1, my wanpipe file as #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Fri May 27 00:25:04 GMT+7 2005 # # Note: This file was generated automatically # by /usr/sbin/wancfg program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT, Comment [interfaces...

....005 this's my setting and my setting wanpipe1.conf #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Mon Sep 5 15:37:16 GMT+7 2005 # # Note: This file was generated automatically # by /usr/sbin/wancfg program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT, Comment [interfaces...

Hi, I learned about shorewall a few days ago and am quite impressed with how easy it was to create a powerful firewall. I set up a test system with a cable modem and it worked flawlessly. I''m going to be building a Router/Firewall for a new T1 that will be using a Sangoma WANpipe card w/ integrated CSU/DSU to connect to a T1. Has anybody done this yet, or do you know if it''s

..., but the left Asterisk never drops the call. Sorry to be so detailed, but I couldn't find anything with Google. In both Asterisks, /etc/zaptel.conf, /etc/asterisk/zapata.conf are essentially identical, except where noted above. I can't find anything in the Sangoma configuration program (wancfg) which would lead me to believe the problem lies there. Any clues? Thanks in advance. Mitch Thompson

Here's my planed setup : PRI from telco <--> (port 1 of A104d) * (port 2 of A104d) <--> PM3 The PM3, for those who don't know is lucent's portmaster RAS dial-up router. I had setup asterisk, zaptel, libpri, wanpipe (as I have sangoma's cards). In wancfg, I have port 1 as TDM_VOICE, with hardware echo on, span 1. Port 2 is TDM_VOICE, without hw echo, Clock as master, reference 0 (for the time being, I'm still not hooked up with my pri, will be 1 in the future), span 2. I alswo had to enable High Impedance on port 2 to operate without alarms....

...== # WANPIPE1 Configuration File #================================================ # # Date: Mon Jul 31 17:10:23 EDT 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT_ANALOG, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU...

...ll and they look fine so it doesn't seem to be jitter or slip or anything like that on the T1. I also tried the calls with 'echocancel' & 'echocancelwhenbridged' set to both yes & no in Zapata.conf. I've also turned echo cancellation on and off on the A101 card using wancfg. I've tried txgain and rxgain values from 0.0 to -10.0 with no affect. Now, to really mess with things, if I dial another SIP softphone extension on the Asterisk box (or IVR or VM), the audio is pristine so I can rule out softphone problems and issues with the audio hardware on the PC. (Plus,...