search for: a104d

Hi, To solve echo problems, I'm considering 2 alternatives. 1> Sangoma A104d - I can't find support for asterisk 1.2.1 2> Desktop echo canceller - http://www.oriontelecom.com/echo_canceller/desktop/e1_ec_desktop.html - I want to know where to buy and price. Any suggestion is appreciated. Thanks. Jason. p.s. : asterisk cli command "reload" can ch...

Hi, Recommending to go Digium because of an OpenBSD issue with the Sangoma A104D is quite funny to say the least since neither is the TE407P supported in BSD by Digium. So the recommendation is useless to the person who originally requested for a comparison between the two products. If someone wanted to send back the A104D, he could have taken advantage of Sangoma's 30 da...

...ompiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : ) This mine motherboard, has a NIC Gbps and if I leave qualified, the A104D not recognized for motherboar, if I disable the NIC Gbps, through lspci, I identify the A104D. But report this error in compiling the wanpipe (./Setup install) WANPIPE DRIVER COMPILE LOG Fri Dec 22 01:19:40 BRST 2006 ----------------------------------- make -C /lib/modules/2.6.18.2-34-default/build...

...his issue? Kernel: Linux 2.6.26-2-amd64 #1 SMP Sun Jun 20 20:16:30 UTC 2010 x86_64 GNU/Linux Asterisk: Asterisk 1.6.1.20 built by root @ xxx on a x86_64 running Linux on 2010-09-03 07:47:24 UTC LibPRI: 1.4.11.4 DAHDI: 2.3.0.1 Echo Canceller: MG2 Wanpipe-Driver: 3.5.15 Sangoma-Firmware: 43 (Board A104d with echo hardware chanceller) Typically this problem can occur with echo cancellaltion. But I do not think, that this is my problem. Best regards, -Thorsten G?llner-

I have a system that I am trying to get a port on a Sangoma A104d card connected to an Adtran 850 with 5 FXS modules and 1 FXO module. A problem I am having is figuring out what cable should be used from the port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1 (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2...

Hi all, I need your lights :) There are many hardware provider for E1 cards on the market, what's your exeperience with E1 and what's the preferred provider for Asterisk out of Digium? Olivier

Hi all, I need to setup call using particular timeslot on one of E1's. I've looked into http://www.voip-info.org/wiki/index.php?page=Asterisk+Zap+channels and it says that: exten => TestTrakt,1,Dial(ZAP/1-2/517255333) exten => TestTrakt,2,hangup should work and force call setup via span 1 (port 1) but when I try setup call rasterisk says: -- Executing [TestTrakt at

Has anyone had experience with one or both of these cards? I'm in a position where I might need to recommend one over the other. I've read everything that I can find online, so now I'd like to hear of personal experiences. Everything I read on both cards is "5 stars! Awesome! It Rocks!" They both seem to have similar capabilities, similar pricing, etc. Could those of

I need your help I have a sangoma A104D on my dell server; I got card status ok with no alarm If I dialed the extension 6210006, it shows the output as stated below, but there is no ringing from the pstn number nor the iax softphone am using on my pc. I will be glad if someone can give me a working config? What I want to achieve is t...

Hi Group, I am currently facing a dead end and any help will be much appreciated. I have an a104d installed in an asterisk box, two of which is configured on ISDN pri. One is facing pstn and the other one is facing a hipath 300e Siemens. I am getting one way audio when a local on the hipath tries to make a pstn call but no issue on incoming calls from pstn going to the hipath locals. local...

...ROR while getting interface flags: No such device done. /etc/wanpipe/scripts/start: 7: Syntax error: Bad for loop variable DAHDI_SPANCONFIG failed on span 1: No such device or address (6) Dont know why I still keep getting a 'No such device' error even if the device was detected (Sangoma a104de, setup asked to configure/skip the 4 ports) before the error happened. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110211/49a79054/attachment.htm>

Upgrading an ancient customer installation... was running 1.4.23.1 (Trixbox) with Zaptel 1.4.12.9 and a Sangoma A102D, which has been running fine for 5+ years. Customer getting anxious about hardware failure, so we built a new box and installed 1.8.24.0, Dahdi 2.7.0.1, and a new Sangoma A104D. The single active span is an RBS T1 B8ZS/ESF/E&M Wink. I tried to move one span over one night which was working fine on the old box. Once plugged in there were no alarms, Sangoma wanpipemon utility showed "connected". I tried calling in on a DID number, and in the 'full&...

Hi, I have the following setup: Ubuntu 12.04.02 LTS (64 bit) Asterisk 11.2.1 Sangoma 4-Port-Card (A104d) with firmware 43 (german e1-ports connected) WANPIPE Release: 3.5.28 DAHDI Version: 2.6.1 Echo Canceller: HWEC libpri version: 1.4.12 I call via sip into the dialplan. Then I do a "Dial(DAHDI/g1/voicenumber,r)". The call is bridged and everything is fine. "dahdi show channels&quo...

Hello all, as good? I am trying to use the package astunicall-1.2.21.0.1 with a Sangoma A104D card and 04 links E1 mfc/r2 in Brazil. The compilation occurred, normally and links is UP if I place in Loop and I obtain to effect called in Loop, but when I extend for the PSTN, links reports the following messages, without asterisk start calls: Dec 5 22:27:12 WARNING[3868]: chan_unicall.c:627...

Hi, we are experiencing a strange issue and I am hoping someone can point me to the right direction or help out with some pointers. We have asterisk 1.6.0.6 with a sangome a104DE card. We have basically 4 T1's for a total of DAHDI 96 channels. We have an agi application (php) that acts as a kind of a calling card application. All users are SIP users that make calls and asterisk then bridges the calls over T1 to the PSTN (after running agi script). Codec between SIP c...

I'm going to need to build a few Asterisk boxes that have dual and quad T1 interfaces. I knew Digium made T1 interface cards and on this list I heard about Sangoma so I did a quick search and found the hardware page at voip-info.org which lists several manufactures I didn't know about. All that leads to this question: I'll be using T1s in the USA. What experiences have you all had

...ri_fixup_principle) and then the hangup kind of breaks, release is not answered and a restart cycle is triggered (by remote side). Anyone can help me debug this ? I've seen many posts with simmilar issues but no answer/solution. This is happening on Asterisk 1.2.16 + libpri 1.2.4 on a sangoma A104D. On a general side, where can I find a document (other than sources :) to start digging where the Zap->pri mapping is done and how, or at leaset what pri_fixup_principle is supposed to do... TIA, -- Carlos G Mendioroz <tron@acm.org>

...but I track very closely the latency (by graphing the output of "sip show peers") which normally shows me when a peer is having connectivity issues. Several that I have investigated this morning have no such issues (latency less than 20ms and steady). I have several servers with Sangoma A104d cards, and the Sangoma driver has a debug mode that lets me see the RBS bit transitions. I have used this in the past to prove that the T1 provider is actually triggering the hangup from their side. Does any such debug mode exist for the Digium cards? I would like to dig into this, because if I...

Here's my planed setup : PRI from telco <--> (port 1 of A104d) * (port 2 of A104d) <--> PM3 The PM3, for those who don't know is lucent's portmaster RAS dial-up router. I had setup asterisk, zaptel, libpri, wanpipe (as I have sangoma's cards). In wancfg, I have port 1 as TDM_VOICE, with hardware echo on, span 1. Port 2 is TDM_VOICE, with...

Hey Guy, I have quick question. I am purchasing Sangoma A102D card but i am confused between PCI and PCI Express. Which card would be good for me. Definitely PCI Express is advance but i just want to know is there any major difference, like quality, performance etc.. -Satish -------------- next part -------------- An HTML attachment was scrubbed... URL: