Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for direction in getting this card working - I currently have a new Trixbox, hoping it'll have the software for this card already. If not, I'll be back asking what drivers I need. Sangoma seems to have a lack of documentation, but it may just be me.... thanks Todd
It sounds like a bad card. Call Sangoma and ask them to replace it. You don't need to use the drive power cable for just a single fxo module. You only need it for the fxs or if you go over 2 fxo cards. In any case, it should not stop your computer from booting. Tom At 07:43 AM 1/3/2007, you wrote:>Hi - I just got a Sangoma A200 card with a single 2FXO module and >what appears to be an empty module. I put the card in my Dell GX260, >but the power light on the front of the box just blinks and won't >power up. I did take the power cable from the CDROM to put on the >card - I don't need the CDROM right now.. > >I'm looking for direction in getting this card working - I currently >have a new Trixbox, hoping it'll have the software for this card >already. If not, I'll be back asking what drivers I need. Sangoma >seems to have a lack of documentation, but it may just be me.... > thanks > Todd
> Hi - I just got a Sangoma A200 card with a single 2FXO module and > what appears to be an empty module. I put the card in my Dell GX260, > but the power light on the front of the box just blinks and won't > power up.Maybe your card is not properly seated.> seems to have a lack of documentation, but it may just be me....It is just you ;) http://wiki.sangoma.com/ If you still have problems with the card, contact Sangoma, they have very good customer support : http://www.sangoma.com/main/contact hth
Just a thought, maybe it won't boot because there is no power to the CD ROM drive????>>> thouleasterisk@gleffsecurity.com 01/03/07 8:43 AM >>>Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for direction in getting this card working - I currently have a new Trixbox, hoping it'll have the software for this card already. If not, I'll be back asking what drivers I need. Sangoma seems to have a lack of documentation, but it may just be me.... thanks Todd _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
For those following this discussion, below is my original message to the list and a reply from Sangoma Tech Support. -t- On Jan 3, 2007, at 8:43 AM, Todd H wrote:> Hi - I just got a Sangoma A200 card with a single 2FXO module and > what appears to be an empty module. I put the card in my Dell > GX260, but the power light on the front of the box just blinks and > won't power up. I did take the power cable from the CDROM to put > on the card - I don't need the CDROM right now.. > > I'm looking for direction in getting this card working - I > currently have a new Trixbox, hoping it'll have the software for > this card already. If not, I'll be back asking what drivers I > need. Sangoma seems to have a lack of documentation, but it may > just be me.... > thanks > Todd> On Jan 4, 2007, at 3:03 PM, David Yat Sin wrote: >> Hi Todd, >> >> We just looked at the blank modules that we usually ship to insert >> in the empty slots of the A200, and there is a small trace that >> connects two pins. >> >> These two pins have been switched to a different function in our >> newer A200 builds and this is causing a short. >> >> Please do not use the blank module. We will either make new blank >> modules or stop shipping the blank modules. >> >> I guess this was not an issue with the FXO module in 2nd slot, but >> rather an issue with the blank module. >> >> Regards, >> David Yat Sin >> tel: 905.474.1990 x119 >> tel: 800.388.2475 x119 >> fax: 905.474.9223 >> msn: david.ys1@hotmail.com >> wiki: wiki.sangoma.com >> >>-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070104/64da9871/attachment.htm