search for: 2fxo

...ny problem but when I tried to call a local extensions connected to my Welltech FXO gateway, I couldn't hear any voice on both ends. I would like to ask if anyone has ever encountered this kind of problem and what should be the solution about this. I already upgrade the firmware of my Welltech 2FXO to version 103 but problem still the same. Is this an Asterisk related issue or maybe on my config? I hope anyone can open up the solution or should I post my config for further info about my settings. thanks in advance. regards.

Please chime in if you've ever wished for digium to make a 4-port daughter board with a combination of 2FXO AND 2FXS ports on the same card. When using the 800 series cards, one must either choose 4-port permutations of FXS/FXO, OR one must give up 2 valuable ports. In other words, when you add ONE 100-series daughter board, you give up TWO of your physical ports. Is there a technical reason for the...

Hello: Is that possible? Do I have to upgrade first to firmware version 6.4? Does firmware version 6.4 exist? Thanks in advance. Regards. -- Usuario Linux Registrado # 342019 --> http://linuxcounter.net/ <-- skype --> luedcortes gtalk --> luedcortes at gmail.com msn --> luedcortes at gmail.com

Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for directi...

You have no dial-peer telling the router what to do with the outbound call. http://www.tape.net/~gerry/asterisk/cisco26x0.html At 12:50 PM 9/26/2003, you wrote: >Like Gerry wrote for callerid you need VIC-2FXO-M1 card. > >Right now I am stuck on making outgoing call. > >Could soembody help me with the configuration. > >On cisco I have soemthing like that: > >dial-peer voice 400 pots >destination-pattern 9T >voice-port 1/1/0 > >In extensions.conf > >exten=>9.,1...

Hi, Having Asterisk-0.4.0 with 2FXO port and Samsung SKP 816H PBX in 2 offices. I am able to make call between two offices. But the problem is that call dosen't hangup. Office A [Asterisk+2FXO+SamsungPBX] <------------- I A X ------------> Office B [Asterisk+2FXO+SamsungPBX] Configuration files are given here.............

...internet (currently satellite). But, I cannot get much out of them, regarding how the phone service works. All I can get is I plug my existing phones and answering machines into the back of the "cable modem" and am good to go. I am hesitant to believe that I can simply plug my TDM400P (2fxo/2fxs) into these (ATA ?) jacks and call it good. Any insight? Am I better off ignoring their phone offering and setting myself up with an IAX or SIP provider? (and surplus-ing the card). I would end up needing more than their single line offering with a second line at $30/month (USD). Seems th...

Hello again Asterisk people. I am running Asterisk 1.42 on an old PowerPC ibook. I have had this deployed for several years now, with pretty good results. Recently I added a callerid service to my landline (qwest). I am using the audiocodes MP114 2fxo/2fxs gateway, which is an outstanding piece of hardware once it's configured (lol). Anyhow, I can see that the gateway is passing caller id info to asterisk because the console will display something like: [Nov 4 13:01:19] NOTICE[32]: chan_sip.c:13362 handle_request_invite: Failed to...

I'm running RedHat 9 with a TDM400 (2FXO, 2FXS). Before I implemented Asterisk, some users were using Bell services to set-up 5 way calling: The user would set up a three way call on one line, switch to the second line, set up another 3 way call and then link the two lines together with the Flash key, thus establishing a 5 way call (t...

Hello, I connected a Micronet SP5014 2FXS + 2FXO gateway to the asterisk, the problem is i can make call but can't receive calls. If i make a "sip show peers" it shows the micronet is not connected to the asterisk. Does anybody knows how to configure the micronet and asterisk to solve this problem ? Thank you

...s. 26 days ago we updated them to CVS version and today the problem reappeared. Average time between failures seems to be around 20-30 days. At first we thought it might be caused becouse we had 5 TDM400P cards in one server. But the problems was also spotted in machines that had only one TDM400P (2FXO/2FXS) card. -- Mike

I have set up asterisk@home <mailto:asterisk@home> with Digium TDM400P 2FXO/2FXS. I am unable to seize my trunks from either soft or analog phones. Inbound calls result in answer/disconnection. I see the following error code on my asterisk server INIT: Id "s0" respawning too fast: disable for 5 minutes Does anyone have any suggestions for me? I?d really apprec...

Hi, I have a pentium 4 with Intel motherboard and one TDM400P (2 fxs, 2fxo) modprobe zaptel is Ok but When I execute modprobe wctdm never load the module, I can wait for 1 year but never response me (error or OK). I need to do ctrl+c Any idea? Edgardo >>> jan@irial.com 06/21/05 10:07 AM >>> i know that there are extensive rework on the transfer in...

I have a TDM-400 from digium with 2FXO+2FXS ports. Any idea on how much power will this drain from the 12 and 5 V connector when all ports are in use? -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ ------------ It's most certainly GNU/Linux, not Linux. Read more at http://ww...

Hi everyone I just ordered a Sangoma A20001 with 2FXO ports - Does anyone have suggested reading pointers for what I'll need to do to get it working? I've only used VoIP in the past so don't know much about Sangoma drivers or Zaptel. I opted for the non-echo canceling card so I may need to do some tuning? Looking for reading......

I'm running AsteriskNow 1.7.1 with a OpenVox 2FXO/2FXS card, SPA942 SIP phone and outgoing SIP and IAX routes. When I dial local PSTN numbers from the SPA942 using the FXO channels I observe a 5-7 second delay between when the PSTN number answers the call and when Asterisk connects the call at my end. There's enough delay time that I hear a...

Hi I've a Sangoma A200D with 2FXO and 2FXS. When using it with only the FXO module, it's all good. But when I put in the FXS module and connect the power, logs tells me not enough power. > Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14...

...then I'll need 4, 2 more for the backup asterisk). - Since I want both asterisk boxes to have the same extensions, is there any internal procedures that do this, or maybe procedure for getting extensions from SQL? .. as a worst case I can always rsync the data :) - I have a cisco 1750 with 2FXO, is it possible to use it, has anybody done it, and if it can share some sample configs? - Having both asterisk boxes using the same lines at the same time, is there anything that tells the box that it is primary (or backup) and if it should pickup the call (or not), and sample configs would...

Hello, I have a current asterisk 1.8.13.0 asterisk-addons 1.6.24 asterisk-sounds 1.2.1 dahdi-linux-complete 2.6.1+2.6.1 libpri 1.4.12 and asterisk-gui 2.1.0.rc1 (not trying to use the gui, want to do everything by hand) with a TDM410 with 2FXO and 2FXS. I have my POTS (PTNS) line plugged into port 1 (FXO) and a analog phone connected to port 3 (FXS). I compiled asterisk with asterisk samples so I realize that may have messed me up. This is all running on Ubuntu Server 12.04. I have been googling/researching reading the book, et...

Hello list , I?m putting to work a new asterisk box. I?m running * 1.0.3 with (one ) Wildcard TDM ( 2FXS* 2FXO) and (one) E-100P. Both boards are working well. ztcfg don?t show me any error. zttool list both cards as "OK" But when i run asterisk on verbose mode i get those errors : [chan_zap.so] => (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found -- Registered...