search for: remora

...ementation uses S4 objects and it's divided in 5 files. Everything is working fine when I load the files into the R console but when I try to make a package I get an error that I don't quite understand. Here's what I do: *1.* in R console, I do and get: > package.skeleton(name='remora') Creating directories ... Creating DESCRIPTION ... Creating Read-and-delete-me ... Saving functions and data ... Making help files ... Done. Further steps are described in './remora/Read-and-delete-me'. Warning messages: 1: In dump(internalObjs, file = file.path(code_dir, sprintf(&quot...

Hi, How can can you stack sangoma cards such as http://www.sangoma.com/datasheets/p_a200-specs in a given PC enclosure ? It seems to me that it introduces mechanical constraints that seem difficult to comply with as space between cards is set by Remora expansion card. Your advice ? Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070807/014a432d/attachment-0001.htm

...0B. I'm wondering what the best upgrade path is, where I define 'best' as the solution that is most likely to work without problems (like interupt conflicts) and work with my current echo tuning . I see my purchase options as follows: 1) TDM40B - use with the current TDM40B 2) Sangoma Remora A20200 - use with the current TDM40B 3) Sangoma Remora A20400 - replace the current TDM40B Any info will be greatly appreciated. Thanks Jim -- Jim Freeze

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device a111:3713 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-...

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red,...

Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for direction in getting this card working - I currently

Hello All, I am trying to figure out which way to go for a quad port fxo solution with a good echo can on it. My options are the sangoma remora, a mediatrix fxo, or something similar. The issue is that I would need a good EC. This would be on about a 9000 foot loop, and the lines don't function well on a spa-3000 or zaptel tdm 4 port card. Anyone have experience that drives them in a certain direction when considering a good ec on a...

Hi list, I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "*No such command 'zap show'*". I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too. zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!! Any ideas??? Thanks in advance!! Note: Below are my zapata.conf and zaptel.conf files ############ BEGIN ZAPA...

...it has 2 Pentium III 1GHz CPUs (Coppermine FSB 133MHz 256K L2 Cache), 768MB PC-133 ECC RAM, 3 UltraSCSI LVD2 18.2GB 10K RPM HDD in RAID5, 100Mb NIC for server. This Server will support 35 SIP phones (users) and 10 FXO ports (for telco lines) and 2 FXS ports (internal analog phones) with a Sangoma Remora A400 PCI card. What do you think? is this hardware enough for this setup??? Thanks in advance for your opinions, Raul -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071010/d27a8e59/attachment.htm

Hello, Junghanns and BeroNet offer 8 BRI ports cards. Do you know if Digium's B410P has an inner TDM bus so that an 8 BRI ports subsystem (2 PCI slots used, but 1 one set of interrupts) could be made out of 2 B410P ? I know you could (theorically) do this with Junghanns and BeroNet cards. Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I have a trixbox2.6.1 on my one server, i have configured sangoma A200/Remora FXO/FXS Analog AFT card on that server, from my zap line the incoming faxes are coming, i have setup the did for zap channel. my question is when i am getting any faxes, asterisk shows me rxfax execution and suddently asterisk crashes and i can't get email notification for received faxes. any...

...og sets plugged in at the demarcation point. No noise. (None of the SIP devices in this configuration have this noise for outgoing calls, so I'm sure it's got something to do with the FXS module). - Plugged the known good analog sets straight into the server - Moved the FXS module off the REMORA daughtercard to the main card - Replaced the FXS module with a new one - Run the server off of battery power, to see if the noise is garbage leaking in off the AC - Turned off the PoE midspan The next thing I'm going to try is turning off the switch it's plugged into. When that is done,...

...: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) $ lspci -v 02:01.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: NEC Corporation Unknown device 1000 Flags: bus master, medium devsel, latency 64, IRQ 10 Memory at fdde0000 (32-bit, non-prefetchable) [size=64K] Nothing else uses IRQ 10. An error when i installed wanpipe stable version 2.3.4-12, i also get the same error whe...

Hello, i am trying to install sangoma a200d to my centOS server but i am receivig this error message: ZT_CHANCONFIG falied on channel 1: invalid argument (22) Please help me on hopw to solve this issue! tnx! kenjie -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/fbeeb280/attachment.htm

Hi all, Years ago, I was pretty sure attempting to use two TDM400p cards in one machine was recommended against by Digium ... probably because the cards couldn't hack it, and/or interrupt problems etc I have seen some posts recently that seem to indicate it is in fact possible these days thanks to some updated firmware perhaps? ..... I just need to have two in the server because the 4 ports

...to > > have two in the server because the 4 ports aren't enough ... > > > > I'd rather just expand by one card rather than get a TDM2400 (or > TDM800??) > > > > Anyone had recent success/failure with this sort of thing? > > > > > > Sangoma Remora Card may be an option? > > http://www.sangoma.com/datasheets/p_a200-specs > > -- > > Warm Regards, > > Lee > Maybe it is time to look at a fractional T1? I recently used www.shopfort1.com for realtime pricing. Thanks, Steve

...n the CDR, so they are not properly accounted (for billing), neither transferred to internals extensions. How can I solve this??? Is this a incompatibility issue between technologies??? Or just a config that I haven't made right??? Thanks in advance... My Setup: - Asterisk 1.4.17 - Sangoma Remora A400D HEC PCI Card (2 FXS / 10 FXO) - Wanpipe 3.2.1 - Zaptel 1.4.7.1 - Grandstream GXP-2000 Phones ================================================================= *zaptel.conf* *# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel...

...ing), neither transferred to > internals extensions. > > How can I solve this??? Is this a incompatibility issue between > technologies??? Or just a config that I haven't made right??? > > Thanks in advance... > > > My Setup: > > - Asterisk 1.4.17 > - Sangoma Remora A400D HEC PCI Card (2 FXS / 10 FXO) > - Wanpipe 3.2.1 > - Zaptel *MailScanner warning: numerical links are often malicious:* > 1.4.7.1 <http://1.4.7.1/> > - Grandstream GXP-2000 Phones > > > ================================================================= > *zaptel.co...

Hi, Busy with dovecot on a linux server with not very much RAM in it (512 MB max total). On this server dovecot will only handle about 12 users, with never more than 3 IMAP webmail users at a time, and a maximum of 2 POP3 users at a time using it. I'm going all secure later on, but first I would like your opinion on what configuration best to use with, say, max 5 users busy at one time, and

...nd when I ask about this trouble they has no clue at all of what I'm talking about. That's why I'm looking for others method so solve this issues, any ideas??? Is my approach right?? Or there's something else I should try first??? *My setup:* Asterisk 1.4.17 Zaptel 1.4.7.1 Sangoma Remora Card A400D with EC (2 FXS / 10 FXO) Wanpipe 3.2.1 Grandstream GXP-2000 / GXP-2020 IP Phones Thanks a lot for any help... PD: This is a production system, so I can test some things but with less flexibility than with a test system, maybe after hours... *My config files:* *zapata.conf:* ;autog...