similar to: Sangoma Remora A202

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hello, Digium does not provide snmp support to monitor their cards ! Anybody has tried Sangoma product A104 Quad T1/E1 or others ? Regards harry ___________________________________________________________________________ Yahoo! Mail r?invente le mail ! D?couvrez le nouveau Yahoo! Mail et son interface r?volutionnaire. http://fr.mail.yahoo.com

Hi! I've went through the READMEs and could not answer this question: During installation, the Setup program asks: Would you like update/upgrade wanpipe drivers? (y/n) For a pure Asterisk TDM installation - is it required to patch the kernel or is this only when using the sangoma cards as WAN router? regards klaus

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device

Hi, How can can you stack sangoma cards such as http://www.sangoma.com/datasheets/p_a200-specs in a given PC enclosure ? It seems to me that it introduces mechanical constraints that seem difficult to comply with as space between cards is set by Remora expansion card. Your advice ? Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to install asterisk(v1.2.22) with FreepBX(v2.2.3) with a 4-Port FXO Sangoma card A200. I'm using Fedora 7 (x86_64) kernel version 2.6.22.1-27.fc7, but i'm having these errors: $ ztcfg -vvvv Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS

Hi: I have a Sangoma A200 card installed in a server with two FXO modules and one FXS module. Analog sets connected to the FXS module have a "squeaky static" -- it's like static mixed with the sound of someone vigorously cleaning a window a few doors down. In other words, it's not a classic static noise, but it is noise, and it's distracting. Remote callers can hear this

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Does anyone know how to determine the echo tail size (in ms) of a particular call? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060114/81fea099/attachment.htm

Hello, i am trying to install sangoma a200d to my centOS server but i am receivig this error message: ZT_CHANCONFIG falied on channel 1: invalid argument (22) Please help me on hopw to solve this issue! tnx! kenjie -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/fbeeb280/attachment.htm

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I had the opportunity to test a Sangoma A200 card and I have some doubts that I would like to consult: I tried to detect the card and I had no success using the wctdm module with DAHDI. I guess this is because electronics is different because the TDM400P and OpenVox A400P cards have separate modules for each channel, while the Sangoma A200

Hi, got a Sangoma A200 with a bunch of extension cards and having real problems getting it to deal with a normal single BT line Symptoms are that incoming calls are fine. Outgoing calls ring the far end, BUT asterisk never sees that the call is answered (ie no message in the logs files saying so), as a result the remove end can hear the PBX side talking, but there is no audio back from the

> > hi, > > How good or bad is the EC in Asterisk? > > Can anyone prove that it works at all and what it's limitations are? > > I ask cause I have some problems with this myself which variate from > call to call, and I see from others that Echo Cancel is a quite common > topic. > > Jan > > I have installed systems that had absolutely no echo

Hi all, I have setup a Dell PowerEdge 2550 with a Sangoma A200 card with 2xFSO and 1XFS modules. The PowerEdge specs are 1 x P3 1133MHz, 512MB RAM. Sangoma A200 has 3 analogue PSTN lines connected. This server is based in Office 1, with 5 users all with a Linksys SPA942 VoIP Handset. There is another Office (Office 2) connected to here using VPN. There are two users in Office 2 with the

Hi, I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there are 3 BT lines connected directly to these ports. One of the lines has BT FeatureLine Compact and this is the line I am having problems with, the other 2 lines are working perfectly, detecting CID, answering incoming calls and placing external calls via SIP devices. I am receiving a error log entry: chan_zap.c:

Hello List! I wanted to share to everyone the following compatible connectivity products that my company installed in our Asterisk based soft switch. I already sent these to the Asterisk.org site many days ago but for some reason they still have to post it. 1. Sangoma A101 single port E1/T1/PRI Card 2. Sangoma A102 dual port E1/T1/PRI Card 3. Sangoma A104 quad port E1/T1/PRI Card 4. Sangoma

Hi all, I bought a Sangoma A200 card from an online supplier and explained exactly what I wanted, 3 incoming phone lines to PBX and a life line (some where to connect a standard BT phone to the PBX incase the power goes, making the BT phone ring). I was told to order 1 x FXS module (2 FXS ports) 2 x FXO modules (4 FXO ports) However being a complete noob, I have connected the 3 lines to the

Hi all, I have a trixbox2.6.1 on my one server, i have configured sangoma A200/Remora FXO/FXS Analog AFT card on that server, from my zap line the incoming faxes are coming, i have setup the did for zap channel. my question is when i am getting any faxes, asterisk shows me rxfax execution and suddently asterisk crashes and i can't get email notification for received faxes. any one help me