search for: a200

...one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for two FXO lines. Can anyone comment on the relative merits of those two devices? Are there any other options in the same price range? As we're a small Charity, price is a major consideration. I don't think we can afford the A200's hardware echo-canceller, fo...

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing problems with asterisk not detecting when a channel has been disconnected? Thanks, Mike On 4/24/06, H...

Hey Everyone, Has any successfully installed this on a Toshiba A200? Any feedback would be great. Kind Regards Matthew Ollerenshaw Network Engineer * +612 1300 887 959 | Ê +612 9890 8349 | * mollerenshaw@visinet.com.au<mailto:mollerenshaw@visinet.com.au> | www.visinet.com.au<http://www.visinet.com.au/> Diploma (Network Engineering) | Microsoft C...

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indee...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I had the opportunity to test a Sangoma A200 card and I have some doubts that I would like to consult: I tried to detect the card and I had no success using the wctdm module with DAHDI. I guess this is because electronics is different because the TDM400P and OpenVox A400P cards have separate modules for each channel, while the Sangoma A200 e...

Hi all, Just want to check from the list experienced personal about the Digium HPEC, where I had purchased the HPEC and wish to run with TDM card Sangoma A200. I can't install HPEC to run with Sangama A200 card, even I had changed my hpec file from i686 to i386. The error that I had as bellow; > Found key 'HPEC-XXXXXXXXXX' for 2 channels. > Found valid HPEC licenses for 2 channels. > Failed to get license challenge: No such device...

Hi all, I have setup a Dell PowerEdge 2550 with a Sangoma A200 card with 2xFSO and 1XFS modules. The PowerEdge specs are 1 x P3 1133MHz, 512MB RAM. Sangoma A200 has 3 analogue PSTN lines connected. This server is based in Office 1, with 5 users all with a Linksys SPA942 VoIP Handset. There is another Office (Office 2) connected to here using VPN. There are...

Hello, i am trying to install sangoma a200d to my centOS server but i am receivig this error message: ZT_CHANCONFIG falied on channel 1: invalid argument (22) Please help me on hopw to solve this issue! tnx! kenjie -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-u...

I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for the past month without many problems (other than the fact that the Sangoma card doesn't disconnect hung up calls immediately, which I posted about in another thread, and has still not been fixed), however, I had a call from one of our clients today and they complained that our phone sy...

I use Trixbox 2.0 with a Sangoma A200 I also have echo so bought the HPEC and yes it works brilliantly. The problem I have is I used to use Trixbox 1.? with this sam hardware and had a few inbound CLID issues on my UK BT lines, Sangoma support suggested changing the RXGAIN in zapata.conf and it worked. Now using Trixbox 2.0 and have up...

...or a powerful box that is compact, can take two hard drives for Raid-1 (no SSD, too expensive), have at least two Gig ports or two 10/100mbps ports. Fit two PCIe or one PCIe card plus it's daughter card which needs as much room as a PCIe and doesn't need the actual slot. That is for Sangoma A200 + Daughter card. I would be really glad if I can get some sort of a KVM over IP for this box built in as this is going to be deployed overseas. One of these servers is to support 30 extensions with transacoding g.729 and the other is to support 10 extensions with transcoding. I don't think th...

Hi - I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't make it work- currently, asterisk will not startup because of a bad module. Below are some log files/config files. If anyone has any suggestions, I'd appreciate it. I used Trixbox 2.0 and followed instructions on (http:// sangoma.e...

Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I...

Hi All, What do you recommend? I was looking at: http://www.voipon.co.uk/sangoma-a200-fxo-fxs-analogue-card-pci-express-p-393.html But it will be 3 PCI slots. Thanks, Gavin.

Hi, I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there are 3 BT lines connected directly to these ports. One of the lines has BT FeatureLine Compact and this is the line I am having problems with, the other 2 lines are working perfectly, detecting CID, answering incoming calls and placing external calls via SIP devices. I am re...

Hi. I have 3 lines connected to a SangomaA200. All was working normally, but 3 days ago we experiment this issue. The outside callers can call us normally; but when we try to do an external call, just receive the message "all circuits are busy". Only happen with outgoing call. Incomming calls work fine. if the conf was not mo...

Hi, Does some one experience the Sangoma A20X-ec series card that cant detect the hangup tone? I got * server 1.2.5 and running on Centos 4.3, I hock up to two PSTN lines and each time some one call in and my phone delay 1-2 sec (this is Asterisk delay nothing to do with Sangoma) and it rings on my phone, however, end on the day I got not less that 10 empty messages. I found out that Sangoma FXO

Hi I was wondering if any one has used these cards, I am looking at this as a replacement for the tdm410, I have some issues with installing the tdm410 in a small case because of the power plug being at the end of the board. I am in australia seems like we have a different setup for out fxs voltage, any one in oz using this card ? Thanks Alex -------------- next part -------------- A non-text

Dear Folks, Anyone knows if Sangoma supports or going to provide support for battery removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it, which is a very nice feature but what about Sangoma? Regards. -- M. Shokuie Nia. -------------- next part -------------- An HTML attachment was scrubbed... URL:

...eried as _ldap._tcp.Default-First-Site-Name._sites.ForestDnsZones.augusta.domain.tld. does not hold this record type need update: SRV _ldap._tcp.Default-First-Site-Name._sites.ForestDnsZones.augusta.domain.tld dc.augusta.domain.tld 389 need cache remove: AAAA dc.augusta.domain.tld 2003:d1:bf47:a200:215:5dff:feb2:1901 Looking for DNS entry AAAA dc.augusta.domain.tld 2003:d1:bf47:a200:215:5dff:feb2:1901 as dc.augusta.domain.tld. Lookup of dc.augusta.domain.tld. succeeded, but we failed to find a matching DNS entry for AAAA dc.augusta.domain.tld 2003:d1:bf47:a200:215:5dff:feb2:1901 need cache...