Robert La Ferla
2006-Jan-28 20:54 UTC
[Asterisk-Users] Adjusting gain, Milliwatt and ztmonitor
I have been trying to adjust the gain as per this document without any success: http://lists.digium.com/pipermail/asterisk-users/2004-November/071301.html I have a PSTN and VoIP (SIP) connection via *. I disabled all echo cancel/training in zapata.conf and set tx/rxgain to 0. I then changed my extensions.conf so that when I call the VoIP line from the PSTN line, it plays the Milliwatt application tone. However, when I call, I don't hear the tone and ztmonitor doesn't change at all. What could be the problem? I am running the latest svn source, Aastra 9133i sip phone and Digium TDM11B. BTW - My PSTN is thru Verizon (MA) and I don't have their test tone #. If you know it, please e-mail it to me.
Seemingly Similar Threads
- How to 'read' ztmonitor and set gains
- Echo calibration with ztmonitor and a testlinefrom a telco
- Effectively using a telco Type 102 Milliwatt Test line with ztmon itor -v to set txgain/rxgain in zapata?
- sangoma card rx/tx gain level
- Calibrating both RX and TX gain?