Displaying 20 results from an estimated 67 matches for "tdm11b".
2006 Mar 09
2
TDM11B Hang up detection not working in France ?
Hello,
my config : aah 2.6 (asterisk 1.2.4) , centos 4.2, 1 TDM11B (1 Fxo / 1
fxs ), 1 phone, 1 softphone
I'm in France
When someone from PSTN calls and hangs up before the call is answered,
internal extension keeps ringing until timeout occurs. PSTN line keeps
busy. Hangup detection doesn't work.
I've played with different paremeters (callpr...
2005 Sep 05
3
TDM11B pinout
Hi Asterisk Community,
I have a development with a TDM11B in it. I am trying to connect this to a
exchange line as well as a UK telephone and are looking for some pinout
information for the FXS port. Is it the centre 2 pins that at the tip and ring.
I have been digging around the Digium site but cannot seem to pick up this info.
Any help appreciated...
2005 Aug 21
1
TDM11B modprobe wcfxs fails
Hi,
I got my TDM11B and am trying to get it to work on my PC.
However, I'm having difficulty getting the wcfxs driver to
load. I've Googled this problem, and while there are others
who have ran into the same problem, none of the solutions
work for me.
I would very much appreciate it if you could suggest thin...
2005 Feb 08
1
Question about TDM11B Configuration
Hello all,
i would like to configure TDM11B with Asterisk, if any one have the configuration steps please provide me it.
Thanks in advance
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050208/1f6dfabe/attachment.htm
2005 Mar 27
0
TDM11B and hook flash
I recently purchased a TDM11B so I could hopefully hook flash the FXO from
either the FXS (on the TDM11B) or a SIP device. From the FXS, I've tried
hitting # then transferring to an extension that flashes the line then dials
the FXS again (3020). This seems to send me to a busy signal and the
console tells me no such host...
2005 Jan 28
0
Continuously ringing Zap/4-1 TDM11B All of a sudden ?[Urgent Pls]
Dear All,
All these days I was ahpppily using Asterisk with TDM11B, but from
today all of a sudden asterisk has started acting strange.
The telephone device connected to channel 1 rings continously,
following info is displayed on console
-- Starting simple switch on 'Zap/4-1'
Jan 28 15:38:58 ERROR[77024176]: callerid.c:261 callerid_feed: fsk_serie
ma...
2005 Feb 13
0
No CallerID on TDM11B?
Hi list!
I'm not getting incoming CallerID in The Netherlands on my TDM11B.
Everything was configures according to the docs at digium.com.
The error on the console is this:
Feb 13 16:49:40 ERROR[16123]: callerid.c:260 callerid_feed: fsk_serie made
mylen < 0 (-84)
Feb 13 16:49:40 WARNING[16123]: chan_zap.c:5396 ss_thread: CallerID feed
failed: Success
Feb 13 16:49:4...
2006 Apr 05
0
Hangup Supervision Issue on Digium TDM11B
Hi all,
I need help in disconnect supervision. Im running on AAH ver.2.5 at home
with TDM400P with 1 FXO and 1 FXS (TDM11B). I have implemented DISA on
AAH for origination (PSTN to VOIP bridging).
I'm facing problems with disconnection supervision. My calls are not
getting disconnected at times and it causes a lot of loss as the
provider is charging me.
After some serious study i have found that my provider (unus...
2006 Jun 01
0
TDM11B FXS port stops working after a reload?
Hi list!
I have a TDM11B (DevKit). When I start asterisk everyting is working fine.
However as soon as I do a RELOAD from the console the FXS port stops
working. I have a phone connected to it, when I pick up the phone after
issuing a RELOAD I get this on the console:
Jun 1 20:27:38 WARNING[14316]: pbx.c:2357 __ast_pb...
2004 Sep 02
2
Please help to config tdm11b
I have a TDM400P with 1 fxo and 1 fxs module(TDM11B)
i just wanted to know how to configure the zaptel and zapata &
extension conf to work well
Please help me on that
2004 May 13
1
TDM11B - 2nd channel is not detected
...t post to this mailing list. I've been following the
development (not as a developer, but as an interested user) of Asterisk
for over a year now. It's only in the last month that we've decided to
give it a try (hey, might as well...everything else we use is open
source).
We ordered a TDM11B (1 FXS, and 1 FXO). The card and Asterisk install
was uneventful. I've been able to load the modules, and the lights on
the jacks (on the card) are green. I've run ztcfg, and it's reporting
that 1 FXO channel and 1 FXS channel have been configured.
I've set up in my zapata.conf...
2004 Dec 24
1
FC3, TDM11B (DEVPCI) and asterisk
Hey folks;
I am a old Dialogic telephony hack and have tried asterisk a while back on
a laptop with the OSS module and I liked what I saw. I recently came across
some info regarding asterisk 1.0 and thought I should give it a go. I used a
AMD K7 MB, compiled the binaries without a real problem and realized that I
might have a sound card issue because I couldn't hear the messages but the
demo
2006 Jan 09
2
TDM400 (TDM11B) configuration
I have fixed this before, but I cannot for the life of me remember how I did it.
I have a TDM400P with one fxo module and one fxs module. I setup
Asterisk @Home and everything works fine, except when I try and call
out. If I call out with a SIP phone it calls the zap extension and
not the pstn line? If I take the zap extension offhook and call with
the SIP phone it dials out the pstn line
2004 Sep 28
1
ZT_CHANCONFIG failed on channel 1
I get this error no matter what I do. I've tried switching to different
locations on the TDM400p to no avail.
I've got the card setup with the green module in slot1 and red in
slot2. My config files are exactly like the "Configure Dev-Kit PCI
(TDM11B)" example.
http://www.digium.com/index.php?menu=configuration#TDM11B
When I run ztcfg -v, I get:
2 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
Please advise.
jeff##at##jeffborders##.##com
2005 Aug 12
5
yet another Asterisk and VMware question
...rver 3.0. Under this VM Linux I've
installed, compiled, and configured all of the latest cvs Asterisk and
associated software. This is a sandbox installation that I just want to test
various features of Asterisk. It by no means is (or ever will be) a
production machine.
I've purchased a TDM11B card and have installed it in the box. Windows sees
it as a PCI Simple Communications board. A Linux "lspci" doesn't show
anything even vaguely resembling this card. This troubles me.
When I do the "modprobe wctdm" (as prescribed in
http://www.digium.com/index.php?menu=c...
2005 Feb 28
1
Zap channel calling back after hangup (due to polarity CID detection)
Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine.
I bought the card mainly to get caller ID to work properly in Sweden, and
that works just fine.
However, if the called or calling party hangs up after I hangup my SIP
channel, polarity CID detection kicks in and dials a couple of signals to my
inco...
2007 May 04
2
need more knowledge about asterisk
Hi all,
I am working wit a Mandriva 2007 and have installed the asterisk svn 1.4
with success. I also used the patch for cellphones and it works perfectly. I
was that happy that I decided to buy a TDM11B and it works.
Now, I want to study a bit the code used by this people. Does anybody know
how can I go deeper in this code with funcitonal bloqs in order to
understand how is possible to interface that much new technologies? I know
there is a book available but I am not in a mood for buying it....
2007 Apr 18
3
asterisk svn and zaptel
Hi all!!
I have downloaded the asterisk from svn checkout
http://svn.digium.com/svn/asterisk/trunk asterisk-trunk (is the asterisk 1.4
subversion). I also downloaded the patch for cellphone and make it work
fine. Then I bought the tdm11b board to have phone connection in my
computer.
I installed the hardware for zapte and the libpri modules in my Mandriva
2007 and the lights of the pci card switch on. I can see zaptel working by
lsmod. Now I go to my asterisk recompile it but I realize there is no
chan_zap.so!!!!! When I recom...
2008 Oct 09
3
DAHDI aaaaaaaaaaaaaaarrrrrrrrrghhhhhhhhh :((((
...hdi/genconf_parameters': No
such file or directory
Also the config files and everything are much more complicated
for dahdi than they were for zaptel
There was some nice documentation and examples on how to get started with
configuring certain devices with zaptel on the digium page, for my TDM11B
they only mention zaptel.....
Did anyone even try this?
2008 May 08
1
qemu/kvm: support for pci passthrough
...need this support. As i saw
on the KVM home page that this feature is plan for 2H2008 in the
roadmap, I wondered if you already have a more precise time frame for
this release? Xen already have this feature but for the rest i prfer
KVM. As this is a key point for the final decsion (we have a Digium
TDM11B FXO/FXS pci card for an Asterisk VM), i'm waiting for an update
about this feature.
Thanks for your answer
--
Nicolas Daneau
Rue Maurice Bertrand 543
5300 Landenne
Belgium
0486/69.01.65