Hi, It seems like my ATA is making a ringing noise... (as it used to), but now (After the upgrade from 1.0.7 to 1.2) asterisk also is either making the ringing, or passing the PRI ringing from the telco on to me. Any suggestions on how to fix this?
It almost seems like I'm getting an inbound ring from my PRI/IAX terminator and asterisk is also generating a ring. If I put an 'r' in my dial statement I get only one ring. But is there any issue to be taken with putting an r in? And apparently I have to put a 'timeout' value in? On 9/16/05, Matt <mhoppes@gmail.com> wrote:> Hi, > It seems like my ATA is making a ringing noise... (as it used to), but > now (After the upgrade from 1.0.7 to 1.2) asterisk also is either > making the ringing, or passing the PRI ringing from the telco on to > me. Any suggestions on how to fix this? >
Can anyone shed any light on to why I get a double ring when calling external numbers? When calling out I hear the actually ring-ring of the called phone and the asterisk ring tone. I'm using the same config I used with 1.0.10 but have now upgraded to 1.2.4. Regards Lee -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060210/2e9317a8/attachment.htm
Oddly enough I'm on Aastra phones too. Doesn't happen with Grandstream phones. I've tried callprogram=yes and no to no effect. What firmware did you have, I'm on 1.3. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bob McDowell Sent: 10 February 2006 12:27 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Double ring I was getting something very similar with my Aastra test phones until I change 'callprogress=' to 'no'. Thanks, Bob On Fri, 10 Feb 2006 12:13:47 -0000 "Lee Archer" <lee.archer@pentagon-systems.com> wrote:> Can anyone shed any light on to why I get a double ring when calling >external numbers? When calling out I hear the actually ring-ring of >the called phone and the asterisk ring tone. I'm using the same >config I used with 1.0.10 but have now upgraded to 1.2.4. > > Regards > > Lee_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/
Viktor Tatianin wrote:>Hello > >Can anyone know how may change(inverting) cas signaling ABCD bits at the >Tormenta 2 (four E1 ports) cards >My cards send idle code ABCD 0101 but my mux which use as channel bank wait >ABCD 1001 > >The idle code is set in zapata.conf. For example: cas=1-15:1101 Sets CAS mode for channels 1 to 15, with the idle pattern 1101. Regards, Steve
Sorry I meant callprogress. I've tried it set to yes and no with no difference. Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bob McDowell Sent: 10 February 2006 13:14 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Double ring 'callprogress', in zapata.conf: http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf Thanks, Bob McDowell -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer Sent: Friday, February 10, 2006 7:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Double ring Oddly enough I'm on Aastra phones too. Doesn't happen with Grandstream phones. I've tried callprogram=yes and no to no effect. What firmware did you have, I'm on 1.3. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bob McDowell Sent: 10 February 2006 12:27 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Double ring I was getting something very similar with my Aastra test phones until I change 'callprogress=' to 'no'. Thanks, Bob On Fri, 10 Feb 2006 12:13:47 -0000 "Lee Archer" <lee.archer@pentagon-systems.com> wrote:> Can anyone shed any light on to why I get a double ring when calling >external numbers? When calling out I hear the actually ring-ring of >the called phone and the asterisk ring tone. I'm using the same >config I used with 1.0.10 but have now upgraded to 1.2.4. > > Regards > > Lee_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/
Am I the only one with this problem? I've got Aastra phones running the 1.3 firmware. It doesn't happen on the Grandstream phones but I'd like to know if anyone else has Aastra 9133i phones with the 1.3 firmware and Asterisk 1.2.4. I'm running a TE110P Pri card. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer Sent: 10 February 2006 13:50 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Double ring Sorry I meant callprogress. I've tried it set to yes and no with no difference. Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bob McDowell Sent: 10 February 2006 13:14 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Double ring 'callprogress', in zapata.conf: http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf Thanks, Bob McDowell -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer Sent: Friday, February 10, 2006 7:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Double ring Oddly enough I'm on Aastra phones too. Doesn't happen with Grandstream phones. I've tried callprogram=yes and no to no effect. What firmware did you have, I'm on 1.3. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bob McDowell Sent: 10 February 2006 12:27 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Double ring I was getting something very similar with my Aastra test phones until I change 'callprogress=' to 'no'. Thanks, Bob On Fri, 10 Feb 2006 12:13:47 -0000 "Lee Archer" <lee.archer@pentagon-systems.com> wrote:> Can anyone shed any light on to why I get a double ring when calling >external numbers? When calling out I hear the actually ring-ring of >the called phone and the asterisk ring tone. I'm using the same >config I used with 1.0.10 but have now upgraded to 1.2.4. > > Regards > > Lee_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/
Hi, the setting progressinband=no seems to fix the problem with my Aastra phones. The Grandstreams were unaffected and still are. Thanks Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Domjan Attila Sent: 10 February 2006 14:22 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Double ring I have the similar problem with thomson sip voip cable modems: http://bugs.digium.com/view.php?id=6083 On Fri, 2006-02-10 at 12:13 +0000, Lee Archer wrote:> Can anyone shed any light on to why I get a double ring when calling > external numbers? When calling out I hear the actually ring-ring of > the called phone and the asterisk ring tone. I'm using the same > config I used with 1.0.10 but have now upgraded to 1.2.4. > > Regards > > Lee > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/
Progressinband=no fixed the issue for me. I've been onto Aastra support already about it. Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Edward de Zeeuw Sent: 14 February 2006 14:55 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Double ring I noticed the issue today and came looking for confirmation when I came upon this thread. My Grandstream does not have this problem. SPA-941, Snom 320 and Aastra 480i all demonstrate this issue. I'm going to Lee Archer wrote:> Am I the only one with this problem? I've got Aastra phones running > the > 1.3 firmware. It doesn't happen on the Grandstream phones but I'd > like to know if anyone else has Aastra 9133i phones with the 1.3 > firmware and Asterisk 1.2.4. I'm running a TE110P Pri card. > > Regards > > Lee > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee > Archer > Sent: 10 February 2006 13:50 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Double ring > > Sorry I meant callprogress. I've tried it set to yes and no with no > difference. > > Lee > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bob > McDowell > Sent: 10 February 2006 13:14 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Double ring > > > 'callprogress', in zapata.conf: > > http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.co > nf > > > > Thanks, > > Bob McDowell > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee > Archer > Sent: Friday, February 10, 2006 7:04 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Double ring > > Oddly enough I'm on Aastra phones too. Doesn't happen withGrandstream> phones. I've tried callprogram=yes and no to no effect. Whatfirmware> did you have, I'm on 1.3. > > Regards > > Lee > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bob > McDowell > Sent: 10 February 2006 12:27 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Double ring > > > I was getting something very similar with my Aastra test phones until > I change 'callprogress=' to 'no'. > > Thanks, > > Bob > > On Fri, 10 Feb 2006 12:13:47 -0000 > "Lee Archer" <lee.archer@pentagon-systems.com> wrote: > >> Can anyone shed any light on to why I get a double ring when calling >> external numbers? When calling out I hear the actually ring-ring of >> the called phone and the asterisk ring tone. I'm using the same >> config I used with 1.0.10 but have now upgraded to 1.2.4. >> >> Regards >> >> Lee >> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ########################################### > > This message has been scanned by F-Secure Anti-Virus for Microsoft > Exchange. > For more information, connect to http://www.f-secure.com/ > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ########################################### > > This message has been scanned by F-Secure Anti-Virus for Microsoft > Exchange. > For more information, connect to http://www.f-secure.com/ > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ########################################### > > This message has been scanned by F-Secure Anti-Virus for MicrosoftExchange.> For more information, connect to http://www.f-secure.com/ > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/
Hi Steve I attempt change in zapata.conf cas=1-15:1101 but use zttool view ABCD bits 1010 Regards, Viktor -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve Underwood Sent: Friday, February 10, 2006 3:25 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Tormenta CAS signaling Viktor Tatianin wrote:>Hello > >Can anyone know how may change(inverting) cas signaling ABCD bits at the >Tormenta 2 (four E1 ports) cards >My cards send idle code ABCD 0101 but my mux which use as channel bank wait >ABCD 1001 > >The idle code is set in zapata.conf. For example: cas=1-15:1101 Sets CAS mode for channels 1 to 15, with the idle pattern 1101. Regards, Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Viktor Tatianin wrote:>Hi Steve > >I attempt change in zapata.conf > >cas=1-15:1101 but use zttool view ABCD bits 1010 > >Regards, >Viktor > >Have you put the E1 in CAS mode with something like: span=1,1,0,cas,hdb3 Steve>-----Original Message----- >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve Underwood >Sent: Friday, February 10, 2006 3:25 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [Asterisk-Users] Tormenta CAS signaling > > >Viktor Tatianin wrote: > > > >>Hello >> >>Can anyone know how may change(inverting) cas signaling ABCD bits at the >>Tormenta 2 (four E1 ports) cards >>My cards send idle code ABCD 0101 but my mux which use as channel bank wait >>ABCD 1001 >> >> >> >> >The idle code is set in zapata.conf. For example: > >cas=1-15:1101 > >Sets CAS mode for channels 1 to 15, with the idle pattern 1101. > >Regards, >Steve > >
Hi Steve
I have next config
zttool
Current Alarms: No alarms.
Sync Source: Tormenta 2 (PCI) Quad E1 Card
IRQ Misses: 0
Bipolar Viol: 14
Tx/Rx Levels: 0/ 0
Total/Conf/Act: 31/ 6/ 6
1111111111222222222333
1234567890123456789012345789012
TxA 000000
TxB 111111
TxC 000000
TxD 111111
RxA 111111
RxB 011111
RxC 011111
RxD 111111
ztcfg -vv
Zaptel Configuration
=====================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: FXO Loopstart (Default) (Slaves: 32)
Channel 33: FXO Loopstart (Default) (Slaves: 33)
Channel 34: FXO Loopstart (Default) (Slaves: 34)
Channel 35: FXO Loopstart (Default) (Slaves: 35)
Channel 36: FXO Loopstart (Default) (Slaves: 36)
Channel 37: FXO Loopstart (Default) (Slaves: 37)
37 channels configured.
this is zaptel.conf
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-isdn-external
;signalling=fxs_ks
;rxwink=300 ; Atlas seems to use long (250ms) winks
signalling=pri_cpe
switchtype=euroisdn
pridialplan=unknown
prilocaldialplan=unknown
callerid=asreceived
usedistinctiveringdetection=yes
usecallingpres=yes
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
;Include AMP configs
#include zapata_additional.conf
channel=> 1-15,17-31
signalling=fxo_ks
context=bank
group=1
cas=32-37:1101
channel=> 32-37
This is my zapata.conf
# Global data
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone = us
defaultzone = us
span=2,1,0,cas,hdb3
fxols=32-37
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve Underwood
Sent: Tuesday, February 21, 2006 2:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Tormenta CAS signaling
Viktor Tatianin wrote:
>Hi Steve
>
>I attempt change in zapata.conf
>
>cas=1-15:1101 but use zttool view ABCD bits 1010
>
>Regards,
>Viktor
>
>
Have you put the E1 in CAS mode with something like:
span=1,1,0,cas,hdb3
Steve
>-----Original Message-----
>From: asterisk-users-bounces@lists.digium.com
>[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve
Underwood>Sent: Friday, February 10, 2006 3:25 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [Asterisk-Users] Tormenta CAS signaling
>
>
>Viktor Tatianin wrote:
>
>
>
>>Hello
>>
>>Can anyone know how may change(inverting) cas signaling ABCD bits at the
>>Tormenta 2 (four E1 ports) cards
>>My cards send idle code ABCD 0101 but my mux which use as channel bank
wait>>ABCD 1001
>>
>>
>>
>>
>The idle code is set in zapata.conf. For example:
>
>cas=1-15:1101
>
>Sets CAS mode for channels 1 to 15, with the idle pattern 1101.
>
>Regards,
>Steve
>
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Hi Viktor, So? You seem to have 5 channels set to fxols mode OK. What exactly that does, I am not sure. FXO operation is highly telco dependent with E1s. I believe what is implemented in zaptel is an arrangement to work with some E1 channel banks. Do you have an actual question this time? Steve Viktor Tatianin wrote:>Hi Steve >I have next config >zttool > >Current Alarms: No alarms. >Sync Source: Tormenta 2 (PCI) Quad E1 Card >IRQ Misses: 0 >Bipolar Viol: 14 >Tx/Rx Levels: 0/ 0 > >Total/Conf/Act: 31/ 6/ 6 > 1111111111222222222333 > 1234567890123456789012345789012 > > TxA 000000 > TxB 111111 > TxC 000000 > TxD 111111 > > RxA 111111 > RxB 011111 > RxC 011111 > RxD 111111 > > > > > > > >ztcfg -vv > >Zaptel Configuration >=====================> >SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) > >Channel map: > >Channel 01: Clear channel (Default) (Slaves: 01) >Channel 02: Clear channel (Default) (Slaves: 02) >Channel 03: Clear channel (Default) (Slaves: 03) >Channel 04: Clear channel (Default) (Slaves: 04) >Channel 05: Clear channel (Default) (Slaves: 05) >Channel 06: Clear channel (Default) (Slaves: 06) >Channel 07: Clear channel (Default) (Slaves: 07) >Channel 08: Clear channel (Default) (Slaves: 08) >Channel 09: Clear channel (Default) (Slaves: 09) >Channel 10: Clear channel (Default) (Slaves: 10) >Channel 11: Clear channel (Default) (Slaves: 11) >Channel 12: Clear channel (Default) (Slaves: 12) >Channel 13: Clear channel (Default) (Slaves: 13) >Channel 14: Clear channel (Default) (Slaves: 14) >Channel 15: Clear channel (Default) (Slaves: 15) >Channel 16: D-channel (Default) (Slaves: 16) >Channel 17: Clear channel (Default) (Slaves: 17) >Channel 18: Clear channel (Default) (Slaves: 18) >Channel 19: Clear channel (Default) (Slaves: 19) >Channel 20: Clear channel (Default) (Slaves: 20) >Channel 21: Clear channel (Default) (Slaves: 21) >Channel 22: Clear channel (Default) (Slaves: 22) >Channel 23: Clear channel (Default) (Slaves: 23) >Channel 24: Clear channel (Default) (Slaves: 24) >Channel 25: Clear channel (Default) (Slaves: 25) >Channel 26: Clear channel (Default) (Slaves: 26) >Channel 27: Clear channel (Default) (Slaves: 27) >Channel 28: Clear channel (Default) (Slaves: 28) >Channel 29: Clear channel (Default) (Slaves: 29) >Channel 30: Clear channel (Default) (Slaves: 30) >Channel 31: Clear channel (Default) (Slaves: 31) >Channel 32: FXO Loopstart (Default) (Slaves: 32) >Channel 33: FXO Loopstart (Default) (Slaves: 33) >Channel 34: FXO Loopstart (Default) (Slaves: 34) >Channel 35: FXO Loopstart (Default) (Slaves: 35) >Channel 36: FXO Loopstart (Default) (Slaves: 36) >Channel 37: FXO Loopstart (Default) (Slaves: 37) > >37 channels configured. > >this is zaptel.conf > >; Zapata telephony interface >; >; Configuration file > >[trunkgroups] > >[channels] > >language=en >context=from-isdn-external >;signalling=fxs_ks >;rxwink=300 ; Atlas seems to use long (250ms) winks >signalling=pri_cpe >switchtype=euroisdn >pridialplan=unknown >prilocaldialplan=unknown >callerid=asreceived >usedistinctiveringdetection=yes >usecallingpres=yes > >; Whether or not to do distinctive ring detection on FXO lines >; >;usedistinctiveringdetection=yes > >usecallerid=yes >hidecallerid=no >callwaiting=yes >usecallingpres=yes >callwaitingcallerid=yes >threewaycalling=yes >transfer=yes >cancallforward=yes >callreturn=yes >echocancel=yes >echocancelwhenbridged=yes >echotraining=400 >rxgain=0.0 >txgain=0.0 >group=0 >callgroup=1 >pickupgroup=1 >immediate=no > >;faxdetect=both >faxdetect=incoming >;faxdetect=outgoing >;faxdetect=no > >;Include genzaptelconf configs >#include zapata-auto.conf > >;Include AMP configs >#include zapata_additional.conf >channel=> 1-15,17-31 > >signalling=fxo_ks >context=bank >group=1 >cas=32-37:1101 >channel=> 32-37 >This is my zapata.conf > ># Global data > >span=1,1,0,ccs,hdb3 >bchan=1-15,17-31 >dchan=16 > >loadzone = us >defaultzone = us > >span=2,1,0,cas,hdb3 >fxols=32-37 > > > > >-----Original Message----- >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve Underwood >Sent: Tuesday, February 21, 2006 2:59 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [Asterisk-Users] Tormenta CAS signaling > > >Viktor Tatianin wrote: > > > >>Hi Steve >> >>I attempt change in zapata.conf >> >>cas=1-15:1101 but use zttool view ABCD bits 1010 >> >>Regards, >>Viktor >> >> >> >> >Have you put the E1 in CAS mode with something like: > >span=1,1,0,cas,hdb3 > >Steve > > > >>-----Original Message----- >>From: asterisk-users-bounces@lists.digium.com >>[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve >> >> >Underwood > > >>Sent: Friday, February 10, 2006 3:25 PM >>To: Asterisk Users Mailing List - Non-Commercial Discussion >>Subject: Re: [Asterisk-Users] Tormenta CAS signaling >> >> >>Viktor Tatianin wrote: >> >> >> >> >> >>>Hello >>> >>>Can anyone know how may change(inverting) cas signaling ABCD bits at the >>>Tormenta 2 (four E1 ports) cards >>>My cards send idle code ABCD 0101 but my mux which use as channel bank >>> >>> >wait > > >>>ABCD 1001 >>> >>> >>> >>> >>> >>> >>The idle code is set in zapata.conf. For example: >> >>cas=1-15:1101 >> >>Sets CAS mode for channels 1 to 15, with the idle pattern 1101. >> >>Regards, >>Steve >> >> >> >> > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >
Hi Steve May I change TX ABCD bits 0101 to 1001 or no ? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve Underwood Sent: Wednesday, February 22, 2006 3:28 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Tormenta CAS signaling Hi Viktor, So? You seem to have 5 channels set to fxols mode OK. What exactly that does, I am not sure. FXO operation is highly telco dependent with E1s. I believe what is implemented in zaptel is an arrangement to work with some E1 channel banks. Do you have an actual question this time? Steve Viktor Tatianin wrote:>Hi Steve >I have next config >zttool > >Current Alarms: No alarms. >Sync Source: Tormenta 2 (PCI) Quad E1 Card >IRQ Misses: 0 >Bipolar Viol: 14 >Tx/Rx Levels: 0/ 0 > >Total/Conf/Act: 31/ 6/ 6 > 1111111111222222222333 > 1234567890123456789012345789012 > > TxA 000000 > TxB 111111 > TxC 000000 > TxD 111111 > > RxA 111111 > RxB 011111 > RxC 011111 > RxD 111111 > > > > > > > >ztcfg -vv > >Zaptel Configuration >=====================> >SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) > >Channel map: > >Channel 01: Clear channel (Default) (Slaves: 01) >Channel 02: Clear channel (Default) (Slaves: 02) >Channel 03: Clear channel (Default) (Slaves: 03) >Channel 04: Clear channel (Default) (Slaves: 04) >Channel 05: Clear channel (Default) (Slaves: 05) >Channel 06: Clear channel (Default) (Slaves: 06) >Channel 07: Clear channel (Default) (Slaves: 07) >Channel 08: Clear channel (Default) (Slaves: 08) >Channel 09: Clear channel (Default) (Slaves: 09) >Channel 10: Clear channel (Default) (Slaves: 10) >Channel 11: Clear channel (Default) (Slaves: 11) >Channel 12: Clear channel (Default) (Slaves: 12) >Channel 13: Clear channel (Default) (Slaves: 13) >Channel 14: Clear channel (Default) (Slaves: 14) >Channel 15: Clear channel (Default) (Slaves: 15) >Channel 16: D-channel (Default) (Slaves: 16) >Channel 17: Clear channel (Default) (Slaves: 17) >Channel 18: Clear channel (Default) (Slaves: 18) >Channel 19: Clear channel (Default) (Slaves: 19) >Channel 20: Clear channel (Default) (Slaves: 20) >Channel 21: Clear channel (Default) (Slaves: 21) >Channel 22: Clear channel (Default) (Slaves: 22) >Channel 23: Clear channel (Default) (Slaves: 23) >Channel 24: Clear channel (Default) (Slaves: 24) >Channel 25: Clear channel (Default) (Slaves: 25) >Channel 26: Clear channel (Default) (Slaves: 26) >Channel 27: Clear channel (Default) (Slaves: 27) >Channel 28: Clear channel (Default) (Slaves: 28) >Channel 29: Clear channel (Default) (Slaves: 29) >Channel 30: Clear channel (Default) (Slaves: 30) >Channel 31: Clear channel (Default) (Slaves: 31) >Channel 32: FXO Loopstart (Default) (Slaves: 32) >Channel 33: FXO Loopstart (Default) (Slaves: 33) >Channel 34: FXO Loopstart (Default) (Slaves: 34) >Channel 35: FXO Loopstart (Default) (Slaves: 35) >Channel 36: FXO Loopstart (Default) (Slaves: 36) >Channel 37: FXO Loopstart (Default) (Slaves: 37) > >37 channels configured. > >this is zaptel.conf > >; Zapata telephony interface >; >; Configuration file > >[trunkgroups] > >[channels] > >language=en >context=from-isdn-external >;signalling=fxs_ks >;rxwink=300 ; Atlas seems to use long (250ms) winks >signalling=pri_cpe >switchtype=euroisdn >pridialplan=unknown >prilocaldialplan=unknown >callerid=asreceived >usedistinctiveringdetection=yes >usecallingpres=yes > >; Whether or not to do distinctive ring detection on FXO lines >; >;usedistinctiveringdetection=yes > >usecallerid=yes >hidecallerid=no >callwaiting=yes >usecallingpres=yes >callwaitingcallerid=yes >threewaycalling=yes >transfer=yes >cancallforward=yes >callreturn=yes >echocancel=yes >echocancelwhenbridged=yes >echotraining=400 >rxgain=0.0 >txgain=0.0 >group=0 >callgroup=1 >pickupgroup=1 >immediate=no > >;faxdetect=both >faxdetect=incoming >;faxdetect=outgoing >;faxdetect=no > >;Include genzaptelconf configs >#include zapata-auto.conf > >;Include AMP configs >#include zapata_additional.conf >channel=> 1-15,17-31 > >signalling=fxo_ks >context=bank >group=1 >cas=32-37:1101 >channel=> 32-37 >This is my zapata.conf > ># Global data > >span=1,1,0,ccs,hdb3 >bchan=1-15,17-31 >dchan=16 > >loadzone = us >defaultzone = us > >span=2,1,0,cas,hdb3 >fxols=32-37 > > > > >-----Original Message----- >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of SteveUnderwood>Sent: Tuesday, February 21, 2006 2:59 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [Asterisk-Users] Tormenta CAS signaling > > >Viktor Tatianin wrote: > > > >>Hi Steve >> >>I attempt change in zapata.conf >> >>cas=1-15:1101 but use zttool view ABCD bits 1010 >> >>Regards, >>Viktor >> >> >> >> >Have you put the E1 in CAS mode with something like: > >span=1,1,0,cas,hdb3 > >Steve > > > >>-----Original Message----- >>From: asterisk-users-bounces@lists.digium.com >>[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve >> >> >Underwood > > >>Sent: Friday, February 10, 2006 3:25 PM >>To: Asterisk Users Mailing List - Non-Commercial Discussion >>Subject: Re: [Asterisk-Users] Tormenta CAS signaling >> >> >>Viktor Tatianin wrote: >> >> >> >> >> >>>Hello >>> >>>Can anyone know how may change(inverting) cas signaling ABCD bits at the >>>Tormenta 2 (four E1 ports) cards >>>My cards send idle code ABCD 0101 but my mux which use as channel bank >>> >>> >wait > > >>>ABCD 1001 >>> >>> >>> >>> >>> >>> >>The idle code is set in zapata.conf. For example: >> >>cas=1-15:1101 >> >>Sets CAS mode for channels 1 to 15, with the idle pattern 1101. >> >>Regards, >>Steve >> >> >> >> > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Viktor Tatianin wrote:>Hi Steve > > >May I change TX ABCD bits 0101 to 1001 or no ? > >Not when you use fxols. You can only control them when you use cas as the signalling type. Steve>-----Original Message----- >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve Underwood >Sent: Wednesday, February 22, 2006 3:28 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [Asterisk-Users] Tormenta CAS signaling > > >Hi Viktor, > >So? You seem to have 5 channels set to fxols mode OK. What exactly that >does, I am not sure. FXO operation is highly telco dependent with E1s. I >believe what is implemented in zaptel is an arrangement to work with >some E1 channel banks. > >Do you have an actual question this time? > >Steve > > >Viktor Tatianin wrote: > > > >>Hi Steve >>I have next config >>zttool >> >>Current Alarms: No alarms. >>Sync Source: Tormenta 2 (PCI) Quad E1 Card >>IRQ Misses: 0 >>Bipolar Viol: 14 >>Tx/Rx Levels: 0/ 0 >> >>Total/Conf/Act: 31/ 6/ 6 >> 1111111111222222222333 >>1234567890123456789012345789012 >> >> TxA 000000 >> TxB 111111 >> TxC 000000 >> TxD 111111 >> >> RxA 111111 >> RxB 011111 >> RxC 011111 >> RxD 111111 >> >> >> >> >> >> >> >>ztcfg -vv >> >>Zaptel Configuration >>=====================>> >>SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >>SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >> >>Channel map: >> >>Channel 01: Clear channel (Default) (Slaves: 01) >>Channel 02: Clear channel (Default) (Slaves: 02) >>Channel 03: Clear channel (Default) (Slaves: 03) >>Channel 04: Clear channel (Default) (Slaves: 04) >>Channel 05: Clear channel (Default) (Slaves: 05) >>Channel 06: Clear channel (Default) (Slaves: 06) >>Channel 07: Clear channel (Default) (Slaves: 07) >>Channel 08: Clear channel (Default) (Slaves: 08) >>Channel 09: Clear channel (Default) (Slaves: 09) >>Channel 10: Clear channel (Default) (Slaves: 10) >>Channel 11: Clear channel (Default) (Slaves: 11) >>Channel 12: Clear channel (Default) (Slaves: 12) >>Channel 13: Clear channel (Default) (Slaves: 13) >>Channel 14: Clear channel (Default) (Slaves: 14) >>Channel 15: Clear channel (Default) (Slaves: 15) >>Channel 16: D-channel (Default) (Slaves: 16) >>Channel 17: Clear channel (Default) (Slaves: 17) >>Channel 18: Clear channel (Default) (Slaves: 18) >>Channel 19: Clear channel (Default) (Slaves: 19) >>Channel 20: Clear channel (Default) (Slaves: 20) >>Channel 21: Clear channel (Default) (Slaves: 21) >>Channel 22: Clear channel (Default) (Slaves: 22) >>Channel 23: Clear channel (Default) (Slaves: 23) >>Channel 24: Clear channel (Default) (Slaves: 24) >>Channel 25: Clear channel (Default) (Slaves: 25) >>Channel 26: Clear channel (Default) (Slaves: 26) >>Channel 27: Clear channel (Default) (Slaves: 27) >>Channel 28: Clear channel (Default) (Slaves: 28) >>Channel 29: Clear channel (Default) (Slaves: 29) >>Channel 30: Clear channel (Default) (Slaves: 30) >>Channel 31: Clear channel (Default) (Slaves: 31) >>Channel 32: FXO Loopstart (Default) (Slaves: 32) >>Channel 33: FXO Loopstart (Default) (Slaves: 33) >>Channel 34: FXO Loopstart (Default) (Slaves: 34) >>Channel 35: FXO Loopstart (Default) (Slaves: 35) >>Channel 36: FXO Loopstart (Default) (Slaves: 36) >>Channel 37: FXO Loopstart (Default) (Slaves: 37) >> >>37 channels configured. >> >>this is zaptel.conf >> >>; Zapata telephony interface >>; >>; Configuration file >> >>[trunkgroups] >> >>[channels] >> >>language=en >>context=from-isdn-external >>;signalling=fxs_ks >>;rxwink=300 ; Atlas seems to use long (250ms) winks >>signalling=pri_cpe >>switchtype=euroisdn >>pridialplan=unknown >>prilocaldialplan=unknown >>callerid=asreceived >>usedistinctiveringdetection=yes >>usecallingpres=yes >> >>; Whether or not to do distinctive ring detection on FXO lines >>; >>;usedistinctiveringdetection=yes >> >>usecallerid=yes >>hidecallerid=no >>callwaiting=yes >>usecallingpres=yes >>callwaitingcallerid=yes >>threewaycalling=yes >>transfer=yes >>cancallforward=yes >>callreturn=yes >>echocancel=yes >>echocancelwhenbridged=yes >>echotraining=400 >>rxgain=0.0 >>txgain=0.0 >>group=0 >>callgroup=1 >>pickupgroup=1 >>immediate=no >> >>;faxdetect=both >>faxdetect=incoming >>;faxdetect=outgoing >>;faxdetect=no >> >>;Include genzaptelconf configs >>#include zapata-auto.conf >> >>;Include AMP configs >>#include zapata_additional.conf >>channel=> 1-15,17-31 >> >>signalling=fxo_ks >>context=bank >>group=1 >>cas=32-37:1101 >>channel=> 32-37 >>This is my zapata.conf >> >># Global data >> >>span=1,1,0,ccs,hdb3 >>bchan=1-15,17-31 >>dchan=16 >> >>loadzone = us >>defaultzone = us >> >>span=2,1,0,cas,hdb3 >>fxols=32-37 >> >> >> >> >>-----Original Message----- >>From: asterisk-users-bounces@lists.digium.com >>[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve >> >> >Underwood > > >>Sent: Tuesday, February 21, 2006 2:59 PM >>To: Asterisk Users Mailing List - Non-Commercial Discussion >>Subject: Re: [Asterisk-Users] Tormenta CAS signaling >> >> >>Viktor Tatianin wrote: >> >> >> >> >> >>>Hi Steve >>> >>>I attempt change in zapata.conf >>> >>>cas=1-15:1101 but use zttool view ABCD bits 1010 >>> >>>Regards, >>>Viktor >>> >>> >>> >>> >>> >>> >>Have you put the E1 in CAS mode with something like: >> >>span=1,1,0,cas,hdb3 >> >>Steve >> >> >> >> >> >>>-----Original Message----- >>>From: asterisk-users-bounces@lists.digium.com >>>[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve >>> >>> >>> >>> >>Underwood >> >> >> >> >>>Sent: Friday, February 10, 2006 3:25 PM >>>To: Asterisk Users Mailing List - Non-Commercial Discussion >>>Subject: Re: [Asterisk-Users] Tormenta CAS signaling >>> >>> >>>Viktor Tatianin wrote: >>> >>> >>> >>> >>> >>> >>> >>>>Hello >>>> >>>>Can anyone know how may change(inverting) cas signaling ABCD bits at the >>>>Tormenta 2 (four E1 ports) cards >>>>My cards send idle code ABCD 0101 but my mux which use as channel bank >>>> >>>> >>>> >>>> >>wait >> >> >> >> >>>>ABCD 1001 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>The idle code is set in zapata.conf. For example: >>> >>>cas=1-15:1101 >>> >>>Sets CAS mode for channels 1 to 15, with the idle pattern 1101. >>> >>>Regards, >>>Steve >>> >>> >>> >>> >>> >>>
Thanks Steve -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve Underwood Sent: Wednesday, February 22, 2006 6:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Tormenta CAS signaling Viktor Tatianin wrote:>Hi Steve > > >May I change TX ABCD bits 0101 to 1001 or no ? > >Not when you use fxols. You can only control them when you use cas as the signalling type. Steve>-----Original Message----- >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of SteveUnderwood>Sent: Wednesday, February 22, 2006 3:28 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [Asterisk-Users] Tormenta CAS signaling > > >Hi Viktor, > >So? You seem to have 5 channels set to fxols mode OK. What exactly that >does, I am not sure. FXO operation is highly telco dependent with E1s. I >believe what is implemented in zaptel is an arrangement to work with >some E1 channel banks. > >Do you have an actual question this time? > >Steve > > >Viktor Tatianin wrote: > > > >>Hi Steve >>I have next config >>zttool >> >>Current Alarms: No alarms. >>Sync Source: Tormenta 2 (PCI) Quad E1 Card >>IRQ Misses: 0 >>Bipolar Viol: 14 >>Tx/Rx Levels: 0/ 0 >> >>Total/Conf/Act: 31/ 6/ 6 >> 1111111111222222222333 >>1234567890123456789012345789012 >> >> TxA 000000 >> TxB 111111 >> TxC 000000 >> TxD 111111 >> >> RxA 111111 >> RxB 011111 >> RxC 011111 >> RxD 111111 >> >> >> >> >> >> >> >>ztcfg -vv >> >>Zaptel Configuration >>=====================>> >>SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >>SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >> >>Channel map: >> >>Channel 01: Clear channel (Default) (Slaves: 01) >>Channel 02: Clear channel (Default) (Slaves: 02) >>Channel 03: Clear channel (Default) (Slaves: 03) >>Channel 04: Clear channel (Default) (Slaves: 04) >>Channel 05: Clear channel (Default) (Slaves: 05) >>Channel 06: Clear channel (Default) (Slaves: 06) >>Channel 07: Clear channel (Default) (Slaves: 07) >>Channel 08: Clear channel (Default) (Slaves: 08) >>Channel 09: Clear channel (Default) (Slaves: 09) >>Channel 10: Clear channel (Default) (Slaves: 10) >>Channel 11: Clear channel (Default) (Slaves: 11) >>Channel 12: Clear channel (Default) (Slaves: 12) >>Channel 13: Clear channel (Default) (Slaves: 13) >>Channel 14: Clear channel (Default) (Slaves: 14) >>Channel 15: Clear channel (Default) (Slaves: 15) >>Channel 16: D-channel (Default) (Slaves: 16) >>Channel 17: Clear channel (Default) (Slaves: 17) >>Channel 18: Clear channel (Default) (Slaves: 18) >>Channel 19: Clear channel (Default) (Slaves: 19) >>Channel 20: Clear channel (Default) (Slaves: 20) >>Channel 21: Clear channel (Default) (Slaves: 21) >>Channel 22: Clear channel (Default) (Slaves: 22) >>Channel 23: Clear channel (Default) (Slaves: 23) >>Channel 24: Clear channel (Default) (Slaves: 24) >>Channel 25: Clear channel (Default) (Slaves: 25) >>Channel 26: Clear channel (Default) (Slaves: 26) >>Channel 27: Clear channel (Default) (Slaves: 27) >>Channel 28: Clear channel (Default) (Slaves: 28) >>Channel 29: Clear channel (Default) (Slaves: 29) >>Channel 30: Clear channel (Default) (Slaves: 30) >>Channel 31: Clear channel (Default) (Slaves: 31) >>Channel 32: FXO Loopstart (Default) (Slaves: 32) >>Channel 33: FXO Loopstart (Default) (Slaves: 33) >>Channel 34: FXO Loopstart (Default) (Slaves: 34) >>Channel 35: FXO Loopstart (Default) (Slaves: 35) >>Channel 36: FXO Loopstart (Default) (Slaves: 36) >>Channel 37: FXO Loopstart (Default) (Slaves: 37) >> >>37 channels configured. >> >>this is zaptel.conf >> >>; Zapata telephony interface >>; >>; Configuration file >> >>[trunkgroups] >> >>[channels] >> >>language=en >>context=from-isdn-external >>;signalling=fxs_ks >>;rxwink=300 ; Atlas seems to use long (250ms) winks >>signalling=pri_cpe >>switchtype=euroisdn >>pridialplan=unknown >>prilocaldialplan=unknown >>callerid=asreceived >>usedistinctiveringdetection=yes >>usecallingpres=yes >> >>; Whether or not to do distinctive ring detection on FXO lines >>; >>;usedistinctiveringdetection=yes >> >>usecallerid=yes >>hidecallerid=no >>callwaiting=yes >>usecallingpres=yes >>callwaitingcallerid=yes >>threewaycalling=yes >>transfer=yes >>cancallforward=yes >>callreturn=yes >>echocancel=yes >>echocancelwhenbridged=yes >>echotraining=400 >>rxgain=0.0 >>txgain=0.0 >>group=0 >>callgroup=1 >>pickupgroup=1 >>immediate=no >> >>;faxdetect=both >>faxdetect=incoming >>;faxdetect=outgoing >>;faxdetect=no >> >>;Include genzaptelconf configs >>#include zapata-auto.conf >> >>;Include AMP configs >>#include zapata_additional.conf >>channel=> 1-15,17-31 >> >>signalling=fxo_ks >>context=bank >>group=1 >>cas=32-37:1101 >>channel=> 32-37 >>This is my zapata.conf >> >># Global data >> >>span=1,1,0,ccs,hdb3 >>bchan=1-15,17-31 >>dchan=16 >> >>loadzone = us >>defaultzone = us >> >>span=2,1,0,cas,hdb3 >>fxols=32-37 >> >> >> >> >>-----Original Message----- >>From: asterisk-users-bounces@lists.digium.com >>[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve >> >> >Underwood > > >>Sent: Tuesday, February 21, 2006 2:59 PM >>To: Asterisk Users Mailing List - Non-Commercial Discussion >>Subject: Re: [Asterisk-Users] Tormenta CAS signaling >> >> >>Viktor Tatianin wrote: >> >> >> >> >> >>>Hi Steve >>> >>>I attempt change in zapata.conf >>> >>>cas=1-15:1101 but use zttool view ABCD bits 1010 >>> >>>Regards, >>>Viktor >>> >>> >>> >>> >>> >>> >>Have you put the E1 in CAS mode with something like: >> >>span=1,1,0,cas,hdb3 >> >>Steve >> >> >> >> >> >>>-----Original Message----- >>>From: asterisk-users-bounces@lists.digium.com >>>[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steve >>> >>> >>> >>> >>Underwood >> >> >> >> >>>Sent: Friday, February 10, 2006 3:25 PM >>>To: Asterisk Users Mailing List - Non-Commercial Discussion >>>Subject: Re: [Asterisk-Users] Tormenta CAS signaling >>> >>> >>>Viktor Tatianin wrote: >>> >>> >>> >>> >>> >>> >>> >>>>Hello >>>> >>>>Can anyone know how may change(inverting) cas signaling ABCD bits at the >>>>Tormenta 2 (four E1 ports) cards >>>>My cards send idle code ABCD 0101 but my mux which use as channel bank >>>> >>>> >>>> >>>> >>wait >> >> >> >> >>>>ABCD 1001 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>The idle code is set in zapata.conf. For example: >>> >>>cas=1-15:1101 >>> >>>Sets CAS mode for channels 1 to 15, with the idle pattern 1101. >>> >>>Regards, >>>Steve >>> >>> >>> >>> >>> >>>_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users