Hello there! I've problem with setting up unicall / mfcR2. can't find proper notation for channel, trying unicall/1, unicall/1/1001, unicall/g1, unicall/g1/1000 and still having no luck. klaudia*CLI> !cp call /var/spool/asterisk/outgoing -- Attempting call on Unicall/1001 for application Dial(363) (Retry 1) Mar 25 09:29:34 NOTICE[19920]: channel.c:2429 __ast_request_and_dial: Unable to request channel Unicall/1001 Mar 25 09:29:34 NOTICE[19920]: pbx_spool.c:270 attempt_thread: Call failed to go through, reason 0 I use: Asterisk 1.2.4, with folowing form soft-switch: -rw-r--r-- 1 root root 314K Feb 5 17:01 libdtmfr2-20060205.tar.gz -rw-r--r-- 1 root root 346K Feb 5 16:57 libmfcr2-20060205.tar.gz -rw-r--r-- 1 root root 300K Feb 5 16:54 libsupertone-20060205.tar.gz -rw-r--r-- 1 root root 344K Feb 5 16:51 libunicall-20060205.tar.gz Any help here? May be someone have working asterisk with R2 sygnalization? BTW: The used hardware is e400p, i've got "green" light on PC-side, and "no-error" on the PABX side (Alcatel Omni Enterprise R6.2). -------------- next part -------------- A non-text attachment was scrubbed... Name: drewicz.vcf Type: text/x-vcard Size: 296 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060325/122e4319/drewicz.vcf
IF all the things are right, at *CLI> "UC show channels" will show you all the channels you have. If in your unicall.conf you wrote "group = 1" along with "channels =>" declaration, that range will belong to group 1 and you can use them like Unicall/g1. How many spans are you using? Are they T1 or E1? []'s MM -----Original Message----- From: Krzysztof Drewicz <drewicz@citicom.pl> To: asterisk-users@lists.digium.com Cc: Sent: Sat, 25 Mar 2006 10:36:31 +0100 Delivered: Sat, 25 Mar 2006 03:34:29 Subject:[Asterisk-Users] help on mfc/r2 Hello there! I've problem with setting up unicall / mfcR2. can't find proper notation for channel, trying unicall/1, unicall/1/1001, unicall/g1, unicall/g1/1000 and still having no luck. klaudia*CLI> !cp call /var/spool/asterisk/outgoing -- Attempting call on Unicall/1001 for application Dial(363) (Retry 1) Mar 25 09:29:34 NOTICE[19920]: channel.c:2429 __ast_request_and_dial: Unable to request channel Unicall/1001 Mar 25 09:29:34 NOTICE[19920]: pbx_spool.c:270 attempt_thread: Call failed to go through, reason 0 I use: Asterisk 1.2.4, with folowing form soft-switch: -rw-r--r-- 1 root root 314K Feb 5 17:01 libdtmfr2-20060205.tar.gz -rw-r--r-- 1 root root 346K Feb 5 16:57 libmfcr2-20060205.tar.gz -rw-r--r-- 1 root root 300K Feb 5 16:54 libsupertone-20060205.tar.gz -rw-r--r-- 1 root root 344K Feb 5 16:51 libunicall-20060205.tar.gz Any help here? May be someone have working asterisk with R2 sygnalization? BTW: The used hardware is e400p, i've got "green" light on PC-side, and "no-error" on the PABX side (Alcatel Omni Enterprise R6.2). E-mail classificado pelo Identificador de Spam Inteligente Terra. Para alterar a categoria classificada, visite http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143279269.898797.13128.alcuta.terra.com.br,5253,Des15,Des15 --Original Message Ends-- -- Melcon Moraes <melcon.moraes@terra.com.br>
Melcon Moraes napisa?(a):>IF all the things are right, at *CLI> "UC show channels" will show you >all the channels you have. > >If in your unicall.conf you wrote "group = 1" along with "channels =>" >declaration, that range will belong to group 1 and you can use them >like Unicall/g1. > >How many spans are you using? Are they T1 or E1? >E1, in e400p: Detected Tormenta 2 Quad E1/PRI - E400P at 0xdfefe000/0xdfefb800 irq 177 Xilinx Chip successfully loaded, configured and started!! Detected Card number: 0 Tor2: Launching card: 0 Registered Tormenta2 PCI Registered tone zone 23 (Poland) SPAN 1: Primary Sync Source SPAN 1: Primary Sync Source Registered tone zone 23 (Poland) all 30 spans configured on the other side. ztcfg -vv Zaptel Configuration ===================== SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: CAS / User (Default) (Slaves: 01) Channel 02: CAS / User (Default) (Slaves: 02) Channel 03: CAS / User (Default) (Slaves: 03) ... Channel 31: CAS / User (Default) (Slaves: 31) 31 channels configured. # cat unicall.conf [channels] immediate=no loglevel=255 protocolclass=mfcr2 protocolvariant=cz,20,7,31 protocolend=co group = 1 context= default channel => 1-15 channel => 17-31 Any hints? -- Krzysztof Drewicz <drewicz@citicom.pl> +48 22 34 54 363 -------------- next part -------------- A non-text attachment was scrubbed... Name: drewicz.vcf Type: text/x-vcard Size: 296 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060325/b83647ad/drewicz.vcf