search for: loopstart

...ami fxsls=1-15,17-31 dchan=16 fxsks=32-39 loadzone = us defaultzone=us I do *modprobe zaptel wct1xxp wcfxs ans seems to work ok. * But when i do ztcfg -vvv i got Zaptel Configuration ====================== SPAN 1: CAS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: FXS Loopstart (Default) (Slaves: 01) Channel 02: FXS Loopstart (Default) (Slaves: 02) Channel 03: FXS Loopstart (Default) (Slaves: 03) Channel 04: FXS Loopstart (Default) (Slaves: 04) Channel 05: FXS Loopstart (Default) (Slaves: 05) Channel 06: FXS Loopstart (Default) (Slaves: 06) Channel 07: FXS Loopstart (Defa...

...ng on ZT_RINGTRAILER else CAC is hooped -----Original Message----- From: Surfer Dude <swell@labranch.com> To: asterisk-users@lists.digium.com <asterisk-users@lists.digium.com> Date: June 20, 2003 10:24 AM Subject: Re: [Asterisk-Users] Question :: groundstart and loopstart :: Update Thanks for the responses. Here is an update on my zap groundstart, loopstart, "disconnect supervision" woes. Apparently, the groundstart mode in the CAC FXO module works on loopstart lines. I still don't understand how and why. I have loop...

...r detected hang-up. Everything else worked. I was frustrated as hell. After a few days of trying everything, I tried to set my CAC II FXO module to Groundstart and configured zaptel.conf and zapata.conf to groundstart signaling. Voila! Everything work! The question is how does groundstart and loopstart work? How was I able to have a somewhat working system using loopstart when it seems that the phone company signaling was groundstart? Can I assume that my lines are indeed groundstart? I am really happy that it works. I can now begin the process of deployment with a much greater feeling of sec...

I am connecting a t100p to a b8zs, superframe, loopstart t1. Previously I've attached to e&m wink and pri lines with no problems; however I seem to be missing something. Should it be fxols in the zaptel.conf (smartjack to x100p) or fxsls? With e&m wink the dnis set was 100, so it was easy to make an extension 100; and it would answer incomi...

*** Now you just need a "phone" or "station" (FXS) device and a method of connecting it. *** So... essentially I need to spend another $125 US on a Wildcard TDM400P so I can plug in an analog phone? On the X100P description it says: "The X100P supports FXS Loopstart and "Kewlstart" (Loopstart with far end disconnection supervision). It can detect ringing and remote hangup and fully supports Pseudo-TDM bridging through Zaptel" So this is telling me that the X100P will function only with an FXS device... is this correct? Sorry for the 'si...

Hello, I have an Asterisk 1.2.10, with a TDM with 2 FXO modules, and 2 GSM Nokia32. I configured the TDM with loopstart signalling. For a few days, all works great: Nov 9 09:28:54 VERBOSE[19103] logger.c: -- Called g1/6XXXXXXXX Nov 9 09:28:54 DEBUG[19103] chan_zap.c: Exception on 14, channel 15 Nov 9 09:28:54 DEBUG[19103] chan_zap.c: Got event Hook Transition Complete(12) on channel 15 (index 0) Nov 9 09:28...

...ecordings. Is it possible to turn down these levels? How about a software limiter? Or a filter that cuts out huge spikes? Could these problems be due to my equipment? Let's see, my system: T400P 4 port T1 port one attached to CAC II w/ 12 FXO set to ground start 12 FXS set to loopstart port two CAC II w/ 24/FXS loopstart port three CAC II w/ 24/FXS loopstart port four free Thanks, Jason -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030625/c4cc5a2f/attachment....

Hello All, Just a question, I have an adit600 and I am looking for a way to pull the incoming cid into asterisk. Does anyone know if this is just not possible via t1? Or is it only available on PRI? Thanks, Greg

...d it to a regular home line. in the /etc/zaptel.conf, I have fxsls=4 In the /etc/asterisk/zapata.conf I have: signaling=fxs_ls language=en group=1 context=default channel => 4 When I start asterisk, I get this error: ERROR[10376]: chan_zap.c:6584 mkintf; Signaling requested on channel 4 is FXO Loopstart but line is in FXS Loopstart Signaling chan_zap.c:9927 setup_zap: Unable to register channel '4' Maybe I have something misconfigured. However, I triead all combinations and it doesn't seem to work. If I take away those lines. Asterisk comes up and in zaptel show command, I see the...

Hi, It seems like my ATA is making a ringing noise... (as it used to), but now (After the upgrade from 1.0.7 to 1.2) asterisk also is either making the ringing, or passing the PRI ringing from the telco on to me. Any suggestions on how to fix this?

...start talking about things like "wink start" vs "ground start" vs >> "loop start", "E&M" vs "T&R", "MF" vs "DTMF" signalling, etc., etc., >> ad nauseum. > FWIW: kewlstart isn't a telco line type like a loopstart or > groundstart trunk line. Its a special mode of the Asterisk soft PBX > system that takes a normal loopstart line (ie. a POTS line) and > watches for a certain event on it to handle line drops (ie. remote > disconnect detection) better than normal loopstart signalling. > (ie. a p...

...); continue; } The above code happily moves an alloca instruction out of the loop, to the new loop header. Shouldn't we also check on !isa<AllocaInst>(Inst) before allowing to move it? The code that breaks because of the moved alloca looks like start: [...] br loopstart loopbody: [use alloc'd mem] call stackrestore(%oldsp) br loopstart loopstart: %oldsp = call stacksave() alloca [...] brcond loopbody, end end: [use alloc'd mem] call stackrestore(%oldsp) Then LoopRotation clones the stacksave from bb3 to bb1 and _moves_ the a...

...moves an alloca instruction out of the loop, to > the new loop header. Shouldn't we also check on > >   !isa<AllocaInst>(Inst) > > before allowing to move it? > > > The code that breaks because of the moved alloca looks like > > start: >   [...] >   br loopstart > > loopbody: >   [use alloc'd mem] >   call stackrestore(%oldsp) >   br loopstart > > loopstart: >    %oldsp = call stacksave() >   alloca >   [...] >   brcond loopbody, end > > end: >   [use alloc'd mem] >   call stackrestore(%oldsp) > >...

...hannel 68: Individual Clear channel (Default) (Slaves: 68) Channel 69: Individual Clear channel (Default) (Slaves: 69) Channel 70: Individual Clear channel (Default) (Slaves: 70) Channel 71: Individual Clear channel (Default) (Slaves: 71) Channel 72: D-channel (Default) (Slaves: 72) Channel 73: FXO Loopstart (Default) (Slaves: 73) Channel 74: FXO Loopstart (Default) (Slaves: 74) Channel 75: FXO Loopstart (Default) (Slaves: 75) Channel 76: FXO Loopstart (Default) (Slaves: 76) 76 channels configured. (The channels at the end are the FXS ones I can't seem to get working) After starting asterisk, th...

...co now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this state and it is closed (from telco) but * reports at the CLI that it cannot create a channel of type zap because everything is congested at this time. The line is a loopstart line from Qwest (yeah I know, no supervision etc, but it was working fine b4). I am totally at a loss as to where to go from here. Any suggestions would be appreciated. zapata.conf [channels] usecallerid=yes callwaiting=no callwaitingcallerid=no threewaycalling=yes transfer=yes cancallforward=...

...asterisk and SIP? I'm looking at that platform, but I have a couple of issues: 1) Echo cancellation. The echo that I'm hearing with an X100P is unacceptable. Does the Audiocodes do better? 2) Line signalling. I'm using Kewlstart with the X100P, but it looks like the audiocodes uses loopstart only. How does this work with voicemail, etc? My experience with loopstart on the X100P is that voicemail never stops and I end up with two-hour long messages. Any comments or suggestions? Thanks, --Ernest

I have an nec electra elite 192 with a t1 card; and am looking for suggestions as to integrating them (can't throw out the system yet!). I have a fully working asterisk server -CVS-04/27/04-19:01:05- (found a hp d220 for $350.00!), 2 digium t100p cards, a plain t1 with loopstart signaling, and 2 working bt102 grandstream ip phones (thanks again Matt for your "start from scratch" article). This is what I'd like: t1 (loopstart)24 channels | | Asterisk t100p #1 | | Asterisk t100p #2 (best signaling option to NEC - e&m wink,...

...=fxs_ls channel => 1-4 /etc/asterisk/extensions.conf: [default] exten => s,1,Answer() exten => s,2,Playback(goodbye) exten => s,3,Hangup() The zaptel and wctdm modules are loaded. ztcfg -vv gives this output: Zaptel Configuration ====================== Channel map: Channel 01: FXS Loopstart (Default) (Slaves: 01) Channel 02: FXS Loopstart (Default) (Slaves: 02) Channel 03: FXS Loopstart (Default) (Slaves: 03) Channel 04: FXS Loopstart (Default) (Slaves: 04) 4 channels configured. What am I missing, here?

On 01/08/14 19:37, Reid Kleckner wrote: > What happens if you drop appending linkage? I think it will just work, > since you are already using a custom section, which will ensure that all > the data appears contiguously in memory. Thanks for the suggestion, but it still puts everything in a single .section statement. > Although, I do worry about what LLVM's alias analysis will

Hi, I have two problems regarding the llvm.stackrestore intrinsic. I'm running on 3.0, but a quick test on trunk also showed the same behavior. First problem: --------------- I have code like: tmp1 = call llvm.stacksave() tmp2 = alloca [do some stuff with tmp2] call llvm.stackrestore(tmp1) [some other stuff] tmp3 = call llvm.stacksave() tmp4 = alloca [do some stuff