thr3ads.net - asterisk users - [Asterisk-Users] MFC/R2 Mexico Unicall Blocked [Aug 2005]

If this information is useful, please help other people find it:
Share via:

Ariel Molina R.

2005-Aug-03 20:48 UTC

[Asterisk-Users] MFC/R2 Mexico Unicall Blocked

I've been trying to configure an E1 in Mexico using unicall, i went
into vozdigital, googled this list, and finally followed this
instructions:
http://voip-info.org/tiki-index.php?page=Asterisk+MFC+R2

I have 10 PSTN numbers and 10 "lines" assigned, so i only have 10
"channels" assigned from my telco.

However when i try to simulate a call using this call file:
--------call file------
Channel: UniCall/g1/1
Callerid: <4772140099>
MaxRetries: 0
RetryTime: 600
WaitTime: 600
Context: principal_in
Extension: 014433988789
Priority: 1
----------------------

I get this messages
--------------------------------------
Aug  4 11:46:06 WARNING[9420]: chan_unicall.c:1240 unicall_call:
       Make Call failed - Blocked
Aug  4 11:46:06 NOTICE[9420]: channel.c:1827 __ast_request_and_dial:
       Unable to request channel UniCall/g1/1
    -- Hungup 'UniCall/11-1'
Aug  4 11:46:06 NOTICE[9420]: pbx_spool.c:229 attempt_thread:
       Call failed to go through, reason 0
--------------------------------------

So i can see Unicall channels are configured but blocked (as UC show
channel). There is not much info about unicall so i require your
advice, what can i do? Where do i look?

Also i constantly receive messages
Aug  4 11:54:07 WARNING[9402]: chan_unicall.c:2865 handle_uc_event:
Unicall/14 event Protocol failure

for each one of the 30  (31?) channels.

I send you my configs and important command outputs:

My zaptel.conf
-------------------
# MFC/R2 does not normally use CRC4
span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
loadzone=mx
defaultzone=us
-------------------

My unicall.conf
-------------------
[channels]
context=incoming
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default

protocolclass=mfcr2
protocolvariant=mx,10,10
protocolend=cpe
group = 1
channel => 1-15
channel => 17-31
-------------------

"ztcfg -vv" outputs
-------------------
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: CAS / User (Default) (Slaves: 01)
Channel 02: CAS / User (Default) (Slaves: 02)
(...)
Channel 30: CAS / User (Default) (Slaves: 30)
Channel 31: CAS / User (Default) (Slaves: 31)

30 channels configured.
-------------------


"UC show channels" says
-------------------
Channel Extension  Context         Status     Language   MusicOnHold
      1            incoming        Blocked               default
      2            incoming        Blocked               default
      3            incoming        Blocked               default
      4            incoming        Blocked               default
      5            incoming        Blocked               default
      6            incoming        Blocked               default
      7            incoming        Blocked               default
      8            incoming        Blocked               default
      9            incoming        Blocked               default
     10            incoming        Blocked               default
     11            incoming        Idle                  default
     12            incoming        Idle                  default
(...)
     31            incoming        Idle                  default


---
@-@

Athiel E. Criollo Merino

2005-Aug-04 16:55 UTC

head link

[Asterisk-Users] MFC/R2 Mexico Unicall Blocked

Seems like your carrier is assigning you  channels from 11 and up to
make calls, why dont test making a definition for group 1 from lines
11 to 20...

Regards
In spanish.

Ariel, parece que Telmex te est? asignando los timeslots 11 al 20 para
tus lineas.
por que no pruebas con tu grupo 1, asignandole solamente desde la
linea o timeslot 11 hasta el 20.

No se mucho sobre se?alizacion, pero tiene algo de logica lo que te
estoy diciendo.

Suerte.

Athiel Criollo


2005/8/3, Ariel Molina R.
<ariel@zarzamora.com.mx>:> I've been trying to configure an E1 in Mexico using unicall, i went
> into vozdigital, googled this list, and finally followed this
> instructions:
> http://voip-info.org/tiki-index.php?page=Asterisk+MFC+R2
> 
> I have 10 PSTN numbers and 10 "lines" assigned, so i only have 10
> "channels" assigned from my telco.
> 
> However when i try to simulate a call using this call file:
> --------call file------
> Channel: UniCall/g1/1
> Callerid: <4772140099>
> MaxRetries: 0
> RetryTime: 600
> WaitTime: 600
> Context: principal_in
> Extension: 014433988789
> Priority: 1
> ----------------------
> 
> I get this messages
> --------------------------------------
> Aug  4 11:46:06 WARNING[9420]: chan_unicall.c:1240 unicall_call:
>        Make Call failed - Blocked
> Aug  4 11:46:06 NOTICE[9420]: channel.c:1827 __ast_request_and_dial:
>        Unable to request channel UniCall/g1/1
>     -- Hungup 'UniCall/11-1'
> Aug  4 11:46:06 NOTICE[9420]: pbx_spool.c:229 attempt_thread:
>        Call failed to go through, reason 0
> --------------------------------------
> 
> So i can see Unicall channels are configured but blocked (as UC show
> channel). There is not much info about unicall so i require your
> advice, what can i do? Where do i look?
> 
> Also i constantly receive messages
> Aug  4 11:54:07 WARNING[9402]: chan_unicall.c:2865 handle_uc_event:
> Unicall/14 event Protocol failure
> 
> for each one of the 30  (31?) channels.
> 
> I send you my configs and important command outputs:
> 
> My zaptel.conf
> -------------------
> # MFC/R2 does not normally use CRC4
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> loadzone=mx
> defaultzone=us
> -------------------
> 
> My unicall.conf
> -------------------
> [channels]
> context=incoming
> usecallerid=yes
> hidecallerid=no
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> musiconhold=default
> 
> protocolclass=mfcr2
> protocolvariant=mx,10,10
> protocolend=cpe
> group = 1
> channel => 1-15
> channel => 17-31
> -------------------
> 
> "ztcfg -vv" outputs
> -------------------
> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> 
> Channel map:
> 
> Channel 01: CAS / User (Default) (Slaves: 01)
> Channel 02: CAS / User (Default) (Slaves: 02)
> (...)
> Channel 30: CAS / User (Default) (Slaves: 30)
> Channel 31: CAS / User (Default) (Slaves: 31)
> 
> 30 channels configured.
> -------------------
> 
> 
> "UC show channels" says
> -------------------
> Channel Extension  Context         Status     Language   MusicOnHold
>       1            incoming        Blocked               default
>       2            incoming        Blocked               default
>       3            incoming        Blocked               default
>       4            incoming        Blocked               default
>       5            incoming        Blocked               default
>       6            incoming        Blocked               default
>       7            incoming        Blocked               default
>       8            incoming        Blocked               default
>       9            incoming        Blocked               default
>      10            incoming        Blocked               default
>      11            incoming        Idle                  default
>      12            incoming        Idle                  default
> (...)
>      31            incoming        Idle                  default
> 
> 
> ---
> @-@
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Athiel E. Criollo Merino

2005-Aug-06 12:44 UTC

head link

[Asterisk-Users] MFC/R2 Mexico Unicall Blocked

Hi Ariel.

I having working a Asterisk server with a digital Telmex Line.  (10 Lines )

this are my files configurations .... i hope this can help you

zaptel.conf
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
loadzone = us
defaultzone=us


unicall.conf
loglevel=255
protocolclass=mfcr2
protocolvariant=mx,20,4
protocolend=cpe
group = 1
context=incoming
channel => 1-15
channel => 17-31

Asterisk UC show channels
Channel Extension  Context         Status     Language   MusicOnHold
      1        incoming        Idle       es         default
      2        incoming        Idle       es         default
      3        incoming        Idle       es         default
      4        incoming        Idle       es         default
      5        incoming        Idle       es         default
      6            incoming        Idle       es         default
      7            incoming        Idle       es         default
      8            incoming        Idle       es         default
      9            incoming        Idle       es         default
     10            incoming        Idle       es         default
     11            incoming        Blocked    es         default
     12            incoming        Blocked    es         default
     13            incoming        Blocked    es         default





2005/8/3, Ariel Molina R.
<ariel@zarzamora.com.mx>:> I've been trying to configure an E1 in Mexico using unicall, i went
> into vozdigital, googled this list, and finally followed this
> instructions:
> http://voip-info.org/tiki-index.php?page=Asterisk+MFC+R2
> 
> I have 10 PSTN numbers and 10 "lines" assigned, so i only have 10
> "channels" assigned from my telco.
> 
> However when i try to simulate a call using this call file:
> --------call file------
> Channel: UniCall/g1/1
> Callerid: <4772140099>
> MaxRetries: 0
> RetryTime: 600
> WaitTime: 600
> Context: principal_in
> Extension: 014433988789
> Priority: 1
> ----------------------
> 
> I get this messages
> --------------------------------------
> Aug  4 11:46:06 WARNING[9420]: chan_unicall.c:1240 unicall_call:
>        Make Call failed - Blocked
> Aug  4 11:46:06 NOTICE[9420]: channel.c:1827 __ast_request_and_dial:
>        Unable to request channel UniCall/g1/1
>     -- Hungup 'UniCall/11-1'
> Aug  4 11:46:06 NOTICE[9420]: pbx_spool.c:229 attempt_thread:
>        Call failed to go through, reason 0
> --------------------------------------
> 
> So i can see Unicall channels are configured but blocked (as UC show
> channel). There is not much info about unicall so i require your
> advice, what can i do? Where do i look?
> 
> Also i constantly receive messages
> Aug  4 11:54:07 WARNING[9402]: chan_unicall.c:2865 handle_uc_event:
> Unicall/14 event Protocol failure
> 
> for each one of the 30  (31?) channels.
> 
> I send you my configs and important command outputs:
> 
> My zaptel.conf
> -------------------
> # MFC/R2 does not normally use CRC4
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> loadzone=mx
> defaultzone=us
> -------------------
> 
> My unicall.conf
> -------------------
> [channels]
> context=incoming
> usecallerid=yes
> hidecallerid=no
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> musiconhold=default
> 
> protocolclass=mfcr2
> protocolvariant=mx,10,10
> protocolend=cpe
> group = 1
> channel => 1-15
> channel => 17-31
> -------------------
> 
> "ztcfg -vv" outputs
> -------------------
> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> 
> Channel map:
> 
> Channel 01: CAS / User (Default) (Slaves: 01)
> Channel 02: CAS / User (Default) (Slaves: 02)
> (...)
> Channel 30: CAS / User (Default) (Slaves: 30)
> Channel 31: CAS / User (Default) (Slaves: 31)
> 
> 30 channels configured.
> -------------------
> 
> 
> "UC show channels" says
> -------------------
> Channel Extension  Context         Status     Language   MusicOnHold
>       1            incoming        Blocked               default
>       2            incoming        Blocked               default
>       3            incoming        Blocked               default
>       4            incoming        Blocked               default
>       5            incoming        Blocked               default
>       6            incoming        Blocked               default
>       7            incoming        Blocked               default
>       8            incoming        Blocked               default
>       9            incoming        Blocked               default
>      10            incoming        Blocked               default
>      11            incoming        Idle                  default
>      12            incoming        Idle                  default
> (...)
>      31            incoming        Idle                  default
> 
> 
> ---
> @-@
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Apparently Analagous Threads

Search for more possibly parallel threads

asterisk users - Aug 2005 - MFC/R2 Mexico Unicall Blocked

[Asterisk-Users] MFC/R2 Mexico Unicall Blocked

[Asterisk-Users] MFC/R2 Mexico Unicall Blocked

[Asterisk-Users] MFC/R2 Mexico Unicall Blocked

Apparently Analagous Threads