On Sun, February 13, 2005 23:01, Vikram Rangnekar said:> span=1,0,0,ccs,hdb3 > bchan=1-15 > dchan=16 > bchan=17-31 > > span=2,1,0,ccs,hdb3 > bchan=32-46 > dchan=47 > bchan=48-62At a guess 16,32,48 and 64 are d channels, where as you are telling it to use b channels for d channels... -- Best regards, Duane http://www.cacert.org - Free Security Certificates http://www.nodedb.com - Think globally, network locally http://www.sydneywireless.com - Telecommunications Freedom http://happysnapper.com.au - Sell your photos over the net! http://e164.org - Using Enum.164 to interconnect asterisk servers "In the long run the pessimist may be proved right, but the optimist has a better time on the trip."
Does anyone have any experience ith configureing the sangoma A102 card for testing using a e1 cross cable i've configured and installed the cards properly even the lights on the card are green which proves that my cross cable is properly built too. my problem is with asterisk which gives me these errors PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 No D-channels available! Using Primary on channel anyways 47! PRI: !! Not good - head of queue has not been transmitted yet I've tried everything i can think off with the wancfg configuration files here is my zaptel and zapata configs. span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3 bchan=32-46 dchan=47 bchan=48-62 -------------------------- zapata.conf switchtype=euroisdn signalling=pri_net group=1 channel=>1-15 channel=>17-31 group=2 signalling=pri_cpe channel=>32-46 channel=>48-62 ------------------------------- do i need to fool around with some jumpers on the card or something to activate internal clock on the card. zttol says INTERNALLY CLOCKED for both the ports. There are NO Alarms and no missed IRQ's I'm using asterisk 1.0.5 on debian with 2.4.29 kernel -- regards Vikram (http://www.vicramresearch.com)
We got also these problems and where searching like fools for solutions ... until the time we changed the main board of the server! (Interrupt sharing or Hyper threading stuff, I don't remember) we replaced the Supermicro board with an intel. Try the same config on another machine (maybe an older P3 or P4 or AMD) Michael -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Vikram Rangnekar Sent: zondag 13 februari 2005 13:02 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Sangoma A102 cards testing Does anyone have any experience ith configureing the sangoma A102 card for testing using a e1 cross cable i've configured and installed the cards properly even the lights on the card are green which proves that my cross cable is properly built too. my problem is with asterisk which gives me these errors PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 No D-channels available! Using Primary on channel anyways 47! PRI: !! Not good - head of queue has not been transmitted yet I've tried everything i can think off with the wancfg configuration files here is my zaptel and zapata configs. span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3 bchan=32-46 dchan=47 bchan=48-62 -------------------------- zapata.conf switchtype=euroisdn signalling=pri_net group=1 channel=>1-15 channel=>17-31 group=2 signalling=pri_cpe channel=>32-46 channel=>48-62 ------------------------------- do i need to fool around with some jumpers on the card or something to activate internal clock on the card. zttol says INTERNALLY CLOCKED for both the ports. There are NO Alarms and no missed IRQ's I'm using asterisk 1.0.5 on debian with 2.4.29 kernel -- regards Vikram (http://www.vicramresearch.com) _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Vikram Rangnekar
2005-Feb-15 11:59 UTC
[Asterisk-Users] Re: Sangoma A102 cards testing FIXED
Its fixed and working great.> > I was working on the dma issue that nenad pointed out and > when i tried to hdparm -d 1 /dev/hda my harddisk i got a > permissioned denied error (I was root) So i started > researching a bit more and realised that since i have a sata > hdd and running it in IDE mode i cant start dma so i just > recompiled the kernel with sata drivers and scsi activated > then i change the bio SATA setting to SATA ENHANCED (nothing > else seems to work) and changed the root=/dev/hda2 to > root=/dev/sda2 in the kernel boot options and i was on my > way. now when i tierd hdparm -d 1 /dev/sda i was told that > scsi dosent have dma so it didnt matter. > > Next i started the wanpipe drivers and started asterisk i > didnt get any errors so to test th config i used > > exten => 111,1,Dial(Zap/g1/301) > exten => 111,2,Hangup > > and dialed that extension 111 and the extension 301 rang. i > had started pri intense debugging and used show channels to > make sure the call went over the e1 channels. > > i'm still testing it, it seems to be working great right now > only error i got was a FCS BAD or somthing like that once. > > My motherboard is a SuperMicro P4SCI just for your information.+++ Vikram Rangnekar [13/02/05 13:01 +0100]:> > Does anyone have any experience ith configureing the sangoma A102 card for > testing using a e1 cross cable i've configured and installed the cards > properly even the lights on the card are green which proves that my cross > cable is properly built too. my problem is with asterisk which gives me these > errors > > PRI got event: HDLC Abort (6)on Primary D-channel of span 1 > PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 > No D-channels available! Using Primary on channel anyways 47! > PRI: !! Not good - head of queue has not been transmitted yet > > > I've tried everything i can think off with the wancfg configuration files > here is my zaptel and zapata configs. > > span=1,0,0,ccs,hdb3 > bchan=1-15 > dchan=16 > bchan=17-31 > > span=2,1,0,ccs,hdb3 > bchan=32-46 > dchan=47 > bchan=48-62 > > -------------------------- > zapata.conf > > switchtype=euroisdn > signalling=pri_net > group=1 > channel=>1-15 > channel=>17-31 > > group=2 > signalling=pri_cpe > channel=>32-46 > channel=>48-62 > ------------------------------- > do i need to fool around with some jumpers on the card or something to > activate internal clock on the card. zttol says INTERNALLY CLOCKED for both > the ports. There are NO Alarms and no missed IRQ's > I'm using asterisk 1.0.5 on debian with 2.4.29 kernel > > -- > regards > Vikram (http://www.vicramresearch.com) > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- regards Vikram (http://www.vicramresearch.com)