I personally would suggest dumping FC3 and going with FC2 and using either
chan_capi coupled with mISDN and one of the mISDN supported cards or getting
a HFC based card and using bristuff. ISDN4Linux is commonly touted as the
least preferred option.
I'm in the middle of setting up a test config of FC2, Fritz! pciv2.0, mISDN
and chan_capi (Using mISDN in order to utilise DID). I initially tried FC3
but couldn't get the capi to be recognised by asterisk, I suspect udev might
have had something to do with it, hence FC2.
Craig
----- Original Message -----
From: "Denis Dulcetta" <Denis.Dulcetta@Logostech.it>
To: <asterisk-users@lists.digium.com>
Sent: Monday, January 10, 2005 11:20 PM
Subject: [Asterisk-Users] Digi Datafire Micro V ISDN Card
Hi to everyone!
I am new to this list and i want to greet you all!
I am trying to install Asterisk on a Fedora Core 3 Distribution with a
Digi Datafire Micro V ISDN Card.
I know that I have to use the ISDN4Linux so in modem.conf I set the I4l
driver ,the msn and device.
Modem.conf
[interfaces]
context=remote
;driver=aopen ; modem by AOpen
driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi
;
; Default language
;
;language=en
type=autodetect
;type=aopen
stripmsd=0
dialtype=tone
;dialtype=pulse
;mode=answer
;mode=ring
mode=immediate
; ISDN example (using i4l)
;
msn=0415040331
device => /dev/ttyI0
I noticed that my card was detected as eth1 by the system and not as
ttyI0, How can I create ttyI0 devices?
If I start Asterisk the error returned is:
== Parsing '/etc/asterisk/modules.conf': Found
[chan_modem.so] => (Generic Voice Modem Driver)
== Parsing '/etc/asterisk/modem.conf': Found
== Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated
Modem Driver)
Jan 10 15:56:51 WARNING[13454]: chan_modem.c:727 mkif: Unable to open
'/dev/ttyI0'
Jan 10 15:56:51 ERROR[13454]: chan_modem.c:956 load_module: Unable to
register channel '/dev/ttyI0'
== Unregistered channel type 'Modem'
Jan 10 15:56:51 WARNING[13454]: loader.c:345 ast_load_resource:
chan_modem.so: load_module failed, returning -1
== Unregistered channel type 'Modem'
Jan 10 15:56:51 WARNING[13454]: loader.c:391 load_modules: Loading
module chan_modem.so failed!
Clearly I have to create the ttyI0 device
Every suggestion will be appreciated!
Thanks to all and sorry for my mistakes!
Denis
----------------------------------------------------------------------------
----
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users