search for: dialtype

...ion. If anybody has any insight it would be greatly appreciated. My modem.conf file is at the end of this email if it helps. Thanks, Shaun Begin modem.conf [interfaces] context=incoming-isdn driver=i4l language=en type=autodetect ;This I'm doing directly in the extension.conf ;stripmsd=1 dialtype=tone ;dialtype=pulse ;mode=answer ;mode=ring mode=immediate ; ISDN example group=1 ;registered one number. msn=4625xxxx ;accepting several more. Could have used * as well ;incomingmsn=57966,57881,57882,57883,57884,57885,57886,57887 incomingmsn=4625xxxx device => /dev/ttyI0 device => /dev/t...

...em.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi ; ; Default language ; ;language=en type=autodetect ;type=aopen stripmsd=0 dialtype=tone ;dialtype=pulse ;mode=answer ;mode=ring mode=immediate ; ISDN example (using i4l) ; msn=0415040331 device => /dev/ttyI0 I noticed that my card was detected as eth1 by the system and not as ttyI0, How can I create ttyI0 devices? If I start Asterisk the error returned is: ==...

I'm still playing with * at the moment. Just trying to figure out how much it can do. Anyway, it looks like * supports voice modems. So here come the obvious questions... How well does * support vmodems? How do I set * to use my vmodem for incoming calls? Has anyone gotten it to work? Thanx, Mike Diehl.

...call without OAD, assuming '0' isdn_tty: call from 0 -> 1856 ignored I have tried "isdnctrl eaz MSNNumber" but am still seeing these messages. Am I missing something fundamental here? Here is my modem.conf context=remote driver=i4l language=en type=autodetect stripmsd=1 dialtype=tone mode=immediate device => /dev/ttyI0 msn=1856 TIA, Max ...

...m where the previous call ended, then the greeting starts as it should. Right now I have removed all codecs but codec_gsm.so and format_gsm.so, recompiled the kernel over and over, but I just can't figure it out. Any one got some ideas? Modem.conf: [interfaces] context=incomming driver=i4l dialtype=tone mode=immediate language=en type=autodetect group=1 msn=39660425 incomingmsn=39660425,39660426 device => /dev/ttyI0 device => /dev/ttyI1 Extensions.conf: [default] include => incomming [incomming] exten => 39660425,1,Wait,1 exten => 39660425,2,Answer ;...

...I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing dialtype=tone ; Mode selection. "Immediate" means that as soon as you dial, you're connected ; and the line is considered up. "Ring" means we wait until the ring cadence ; occurs at least once. "Answer" means we wait until the other end picks up. mode=immediate ; ; List...

...mand.Subcommand = 0xff.0x82 Oct 7 16:20:51 ERROR[-1228764240]: chan_capi.c:1226 pipe_frame: wrote -1 bytes instead of 48 The config files look like this: modem.conf [interfaces] context=remote driver=i4l language=en type=autodetect ;This I'm doing directly in the extension.conf ;stripmsd=1 dialtype=tone ;dialtype=pulse ;mode=answer ;mode=ring mode=immediate ; ISDN example group=1 ;registered one number. msn=99 ;accepting several more. Could have used * as well incomingmsn=* device => /dev/ttyI0 ;device => /dev/ttyI1 --------------------------------------------------------------------...

...ested device 'ttyI1' does not existOct 16 07:34:21 NOTICE[1113516976]: app_dial.c:714 dial_exec: Unable to create channel of type 'Modem' == Everyone is busy/congested at this time Here is my modem.conf: --- [interfaces] context=remote driver=aopen ; modem by AOpen stripmsd=0 dialtype=tone mode=immediate group=1 ; group=1,2,3,9-12 And here my modules.conf: --- [modules] autoload=yes noload => pbx_gtkconsole.so noload => pbx_kdeconsole.so noload => app_intercom.so load => res_features.so load => chan_capi.so load => chan_modem.so load => res_mus...

...the same message everytime I try to dial in. The complete message is: pbx.c:1868 ast_pbx_run: Channel 'Modem[i4l]/ttyI0 sent into invalid extension 's' in context 'default', but no invalid handler modem.conf: [interfaces] context=remote driver=i4l type=autodetect stripmsd=0 dialtype=tone mode=immediate msn=12345678 (not the real number of course) device => /dev/ttyI0 group=1 extensions.conf: Is the sample extensions.conf, at the moment. Any ideas/solutions would be great! Thanks. Ian. -- Nambour Christian College ... Sow to Harvest. http://www.ncc.qld.edu.au ______...

...aq EVO with RH9/kernel 2.4.20-30.9. Fritz!Card PCI v2 Asterisk CVS-04/17/04-21:36:18 Basically I run: modprobe -a hisax_fcpcipnp before I start asterisk with -vvvvvgc The configs are like this: MODEM.CONF: [interfaces] context=default driver=aopen driver=i4l language=en type=autodetect stripmsd=0 dialtype=tone mode=immediate device => /dev/ttyI0 device => /dev/ttyI1 group=1 msn=0208080808 incomingmsn=* device => /dev/ttyI0 device => /dev/ttyI1 EXTENSIONS.CONF: [general] static=yes writeprotect=no [globals] TRUNK=Modem/g1 TRUNKMSD=0 [default] exten => _9001,1,Dial(${TRUNK}:0208080809,...

...9 count 1697 kernel: Eicon.Diehl Diva: IRQ 9 count 1705 kernel: HiSax: DSS1 Rev. 1.1.4.1 kernel: HiSax: 2 channels added kernel: HiSax: MAX_WAITING_CALLS added so it appears to be detected. I'm using the following modem.conf: [interfaces] context=remote driver=i4l language=en type=autodetect dialtype=tone mode=immediate group=1 msn=91234567 incomingmsn=* device => /dev/ttyI0 Starting asterisk with -vvvvc returns: == Parsing '/etc/asterisk/modules.conf': Found [chan_modem.so] => (Generic Voice Modem Driver) == Parsing '/etc/asterisk/modem.conf': Found == Loading mode...

...nel 2.4.19 patched to disable dtmf). All seems ok (apart some echo issues that seems gone with mec2 aggressive suppressor), but outgoing dtmf doesn't work . or at least I hear the very first part of the dtmf, but then it seems suppressed. here's my modem.conf [interfaces] context=telecom dialtype=tone mode=immediate features=dtmf,noquelch driver=i4l group=1 msn=xxxxxxxxx device => /dev/ttyI0 device => /dev/ttyI1 ingoing calls are ok. any hints? Matteo Brancaleoni mbrancaleoni at espia.it Emmegi System Administrator EspiA - EMMEGI Srl - e*solution provider Uffici: Via Pascoli, 37...

...s /dev/ttyI0. The card works fine in minitel and dials out without a problem.. However try as I might I can't get the card to work within *, inbound or out. dmesg confirms the card's fine and is working out (and I think in too =)). The modem.conf is: [interfaces] context=remote driver=i4l dialtype=tone mode=immediate context=s0bus group=1 ; group=1,2,3,9-12 msn=0 incomingmsn=123456789,123456780 device => /dev/ttyI0 device => /dev/ttyI1 (as found on another post to the list) In extensions.conf I have: [globals] TRUNK=Modem/ttyI0 [trunk] xten => _9XXXXXXXXXX,1,Dial(${TRUNK...

.../ACzerniak-0904' I change the TRUNK variable from Modem/g1 to Modem/ttyI[0|1], but this have the same effect. What means the "Destination g1/01xxxxx requires a _real_ destination" ? Thanks in advanced. Regards, Andreas. The modem.conf: [interfaces] context=remote driver=i4l dialtype=tone mode=immediate group=1 msn=85xxxxxx device => /dev/ttyI0 device => /dev/ttyI1 The extentsion.conf [globals] CONSOLE=Console/dsp ; Console interface for demo IAXINFO=guest ; IAXtel username/password TRUNK=Modem/g1 TRUNKMSD=1...

I have installed a Billion ISDN card in my Asterisk. Calls between sip and isdn work. The i4l channel has MSN=26. I also put incomingmsn=26,27 in modem.conf. extensions.con: [incoming-isdn] exten => s,1,Dial(SIP/701,20,Ttr) ;will make my extension 701 ring, while exten => 26,1,Dial(SIP/701,20,Ttr) ;will cause an error message in the Cli interface: WARNING[196621]: pbx.c:1814

...dem_i4l.c successfully and recompiled Asterisk (make clean; make; make install). Unfortunately I still can't get DTMF working. I've included my modem.conf below in case there might be any settings that could help: [interfaces] context=incoming-isdn driver=i4l language=en type=autodetect dialtype=tone mode=immediate features=noquelch,dtmf group=1 msn=4627xxxx incomingmsn=4625yyyy,4625zzzz,4627xxxx device => /dev/ttyI0 device => /dev/ttyI1 If anybody knows anything that might help - any help would be greatly appreciated. Failing that - does anybody know where to buy an AVM Fritz!C...

...normal call progress in * ??? This is a Dutch bank, maybe ppl in Holland using * can try to call the bank. It is the rabobank. relevant configs: modem.conf [interfaces] context=remote driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi language=en type=autodetect stripmsd=0 dialtype=tone mode=answer group=1 ; group=1,2,3,9-12 msn=xxxxxxxxx incomingmsn=* device => /dev/ttyI0 device => /dev/ttyI1 device => /dev/ttyI2 device => /dev/ttyI3 The lines in extensions.conf that handle outgoing calls exten => _0XXXXXXXXX,1,Dial(${TRUNK}:${EXTEN},50,Ttr) exten =...

...I don't know if I have to modify the dialplan or if it depends on my configuration: what is wrong? Any help will be appreciated! TIA, Alex modem.conf [interfaces] context=pstn-in driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi language=it type=autodetect stripmsd=0 dialtype=tone mode=immediate group=1 msn=***REMOVED*** device => /dev/ttyI0 device => /dev/ttyI1 sip.conf [general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=ulaw allow=alaw context = sip-remote-in...

...not from ISDN to IP-Phone. A known problem ??? Thanks in advance Michael i am using asterisk-cvs, pwlib V1.6.6 (janus), openh323 V1.13.5 (janus) and oh323-0.6.0 Here are my config's ############## # modem.conf # ############## [interfaces] context=isdn driver=i4l language=en stripmsd=0 dialtype=tone mode=immediate msn=8540340 context=8540340 device => /dev/ttyI0 device => /dev/ttyI1 ################## #extensions.conf # ################## [general] static=yes writeprotect=no [8540340] exten => s,1,Wait,1 exten => s,2,Answer exten => s,3,Dial(OH323/192.168.70.227) [voip-...

...d (a plain HFC card) with asterisk. i configured modem.conf this way, after reading http://www.voip-info.org/tiki-index.php?page=Asterisk+ISDN4Linux: [interfaces] context=incoming-linea driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi language=it type=autodetect stripmsd=0 dialtype=tone mode=immediate group=1 ; group=1,2,3,9-12 msn=734631522 device => /dev/ttyI0 ;device => /dev/ttyI1 but when i start asterisk -vvvc, i get: == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver...