search for: ttyi0

...ISAC version (0): 2086/2186 V1.1 NETjet-S: IRQ 201 count 0 NETjet-S: IRQ 201 count 6 HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added Asterisk's modem.conf driver=i4l group=1 msn=(my first number) incomingmsn=(my other numbers) outgoingmsn=0 device => /dev/ttyI0 device => /dev/ttyI1 ;features=dtmf,noquelch ;features=dtmf Asterisk -cvvvvv shows: Asterisk Ready. *CLI> == Starting Modem[i4l]/ttyI0 at IN-isdn,(my msn),1 failed so falling back to exten 's' == Starting Modem[i4l]/ttyI0 at IN-isdn,s,1 still failed so falling back to context &...

...is "not set" Then I have asterisk modem.conf configured as: [interfaces] context=remote driver=i4l dialtype=tone mode=immediate echocancel=yes usecallerid=yes features=dtmf,noquelch group=1 ; group=1,2,3,9-12 msn=83390897 incomingmsn=83390897 callerid=asreceived device => /dev/ttyI0 device => /dev/ttyI1 Then I start asterisk: [chan_modem.so] => (Generic Voice Modem Driver) == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) -- Configured modem /dev/ttyI0 with driver i4l (Linux I...

...4l ; isdn4linux - an alternative to i4l is to use chan_capi ; ; Default language ; ;language=en type=autodetect ;type=aopen stripmsd=0 dialtype=tone ;dialtype=pulse ;mode=answer ;mode=ring mode=immediate ; ISDN example (using i4l) ; msn=0415040331 device => /dev/ttyI0 I noticed that my card was detected as eth1 by the system and not as ttyI0, How can I create ttyI0 devices? If I start Asterisk the error returned is: == Parsing '/etc/asterisk/modules.conf': Found [chan_modem.so] => (Generic Voice Modem Driver) == Parsing '/etc/asteri...

...old,default exten => s,6,Dial,SIP/600|10|mt ; Ring Doris for 10 secs exten => s,7,Dial,SIP/666|10|mt ; Ring Hamish for 10 secs exten => s,8,Dial,zap/2|10|mt ; Ring Adam for 10 secs The debug output: -- Executing Answer("Modem[i4l]/ttyI0", "") in new stack -- Executing DigitTimeout("Modem[i4l]/ttyI0", "5") in new stack -- Set Digit Timeout to 5 -- Executing ResponseTimeout("Modem[i4l]/ttyI0", "10") in new stack -- Set Response Timeout to 10 -- Executing Wait...

...g/outgoing calls from *. I've tried playing with modem.conf and extensions.conf every which way I can think of, using samples and whatever I can find off the net, and I get the same message everytime I try to dial in. The complete message is: pbx.c:1868 ast_pbx_run: Channel 'Modem[i4l]/ttyI0 sent into invalid extension 's' in context 'default', but no invalid handler modem.conf: [interfaces] context=remote driver=i4l type=autodetect stripmsd=0 dialtype=tone mode=immediate msn=12345678 (not the real number of course) device => /dev/ttyI0 group=1 extensions.conf:...

...IP-client in the LAN. Ztdummy works with conferences. Here are my messages. I have seen several discussion threads in the mail-archive regarding this subject, but could not find an answer. Is this something I have to do without without Zaptel devices? -- Executing BackGround("Modem[i4l]/ttyI0", "demo-instruct") in new stack -- Playing 'demo-instruct' -- Executing MP3Player("Modem[i4l]/ttyI0", "/var/lib/asterisk/mohmp3/sample-hold.mp3") in new stack NOTICE[73738]: File app_mp3.c, Line 80 (timed_read): Selected timed out/errored out with...

...Thanks Andreas P.S. I can not use the CAPI-channel because there is no CAPI for the Fritz-card that supports ISDN-Mode PTP. Here ist what Asterisk shows on the console, when a call comes in: ---------------snip---------- Asterisk Ready. *CLI> *CLI> -- Executing Wait("Modem[i4l]/ttyI0", "1") in new stack -- Executing Answer("Modem[i4l]/ttyI0", "") in new stack -- Executing DigitTimeout("Modem[i4l]/ttyI0", "5") in new stack -- Set Digit Timeout to 5 -- Executing ResponseTimeout("Modem[i4l]/ttyI0", &q...

...that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing Dial("IAX[menger@172.16.11.2:5036]/2", "modem/g1/v{EXTEN:1}") in new stack -- Called g1/v{EXTEN:1} -- Modem[i4l]/ttyI0 is busy -- Hungup 'Modem[i4l]/ttyI0' == Everyone is busy at this time -- Executing Congestion("IAX[menger@172.16.11.2:5036]/2", "") in new stack == Spawn extension (international, 90412463080, 2) exited non-zero on 'IAX[menger@172.16.11.2:5036]/2'...

...her errors or warnings. When I try to receive a fax (sent from a Rockwell HCF modem) I get the following output in the asterisk console, and the originating fax doesn't handshake with it: ================================================================== -- Executing Goto("Modem[i4l]/ttyI0", "fax|s|1") in new stack -- Goto (fax,s,1) -- Executing Macro("Modem[i4l]/ttyI0", "faxreceive") in new stack -- Executing RxFAX("Modem[i4l]/ttyI0", "/var/spool/asterisk-fax/1087693402.1.tif") in new stack Jun 20 10:34:25 NOTICE[294927]...

...talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing Dial("SIP/PHONE2-d557", "Modem/ttyI0:v0413xxxxxx") in new stack -- Called ttyI0:v0413xxxxxx On the Asterisk console when I dial a test mobile number (I've used 0413xxxxxx to replace the actual digits in the output above) from a SIP phone. The numbers I'm dialing are 00413xxxxxx. I get ring tone on the dialing...

...voip-info.org/tiki-index.php?page=Asterisk+ISDN4Linux: [interfaces] context=incoming-linea driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi language=it type=autodetect stripmsd=0 dialtype=tone mode=immediate group=1 ; group=1,2,3,9-12 msn=734631522 device => /dev/ttyI0 ;device => /dev/ttyI1 but when i start asterisk -vvvc, i get: == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) Jul 25 11:47:32 WARNING[26639]: chan_modem_i4l.c:161 i4l_init: Unable to set to voice mode...

..., 5221, 1) exited non-zero on 'SIP/4122-d20d' Strange think I can call a SIP extension ---------------------------------------------------------- 2-3 test OK ISDN phone NetMeeting via Asterisk ---------------------------------------------------------- -- Executing Goto("Modem[i4l]/ttyI0", "4001|1") in new stack -- Goto (lesmuids,4001,1) -- Executing Dial("Modem[i4l]/ttyI0", "OH323/4001") in new stack -- H.323 call to 4001 with codec ALAW -- Called 4001 -- OH323/L20707 is ringing -- OH323/L20707 answered Modem[i4l]/ttyI0...

...anguage=en type=autodetect ;This I'm doing directly in the extension.conf ;stripmsd=1 dialtype=tone ;dialtype=pulse ;mode=answer ;mode=ring mode=immediate ; ISDN example group=1 ;registered one number. msn=99 ;accepting several more. Could have used * as well incomingmsn=* device => /dev/ttyI0 ;device => /dev/ttyI1 ------------------------------------------------------------------------------------------------------------------------ modules.conf [modules] autoload=yes ; ; If you want, load the GTK console right away. ; Don't load the KDE console since ; it's not as sophistic...

...is correctly configured (I don't know anything about the "unauthorized source code changes"). In modem.conf I have: [interfaces] driver=i4l language=en type=autodetect dialtype=tone mode=immediate context => isdn group => 4 msn=1111 incomingmsn => 6791578 device => /dev/ttyI0 incomingmsn => 6791608 device => /dev/ttyI1 I don't know where the SPID should go. In MSN? In extensions.conf I have: [isdn] exten => s,1,Wait(1) exten => s,2,Answer exten => s,3,Goto(mainmenu|s|4)...

I'm trying using Asterisk over an isdn line. I configured my Eicon Diva card by the hisax module and it works with the Asterisk's chan_modem (and chan_modem_i4l) driver. The problem is that I can receive calls (on /dev/ttyI0) but when I make a call I always have the line busy (on ttyI0 but even if I use an other device like ttyI1). This is a part of my consol output: -- Executing Dial("SIP/214-6621", "Modem/g0:338???????") in new stack -- Called g0:338??????? -- Modem[i4l]/ttyI0 is...

...owing message: .... == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) Jun 23 01:00:24 WARNING[16384]: chan_modem_i4l.c:144 i4l_init: Unable to set to voice mode Jun 23 01:00:24 WARNING[16384]: chan_modem.c:396 modem_setup: Modem Initialization Failed on '/dev/ttyI0', driver i4l. Jun 23 01:00:24 WARNING[16384]: chan_modem.c:736 mkif: Unable to configure modem '/dev/ttyI0' Jun 23 01:00:24 ERROR[16384]: chan_modem.c:930 load_module: Unable to register channel '/dev/ttyI0' == Unregistered channel type 'Modem' Jun 23 01:00:24 WARNING[...

...Regards Michael L?jtnant System Details: Lastest * CVS-HEAD Libtiff-3.5.7 Linux-2.6.6 kernel Fritz AVM ISDN Card extension.conf: [incomming] exten => s,1,Answer exten => s,2,rxfax("/tmp/minfax.tif") exten => s,3,hangup Console Log: -- Executing Answer("Modem[i4l]/ttyI0", "") in new stack -- Executing RxFAX("Modem[i4l]/ttyI0", "/tmp/minfax.tif") in new stack Changed from phase 0 to 1 Slow carrier up Slow carrier down Start receiving document Changed from phase 1 to 4 Sending ident >>> CSI: 40 20 20 20 20 20 20 20 20...

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4325 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030331/0fbcd9a7/attachment.gif

...erisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[1024]: File chan_modem_i4l.c, Line 144 (i4l_init): Unable to set to voice mode WARNING[1024]: File chan_modem.c, Line 395 (modem_setup): Modem Initialization Failed on '/dev/ttyI0', driver i4l. WARNING[1024]: File chan_modem.c, Line 734 (mkif): Unable to configure modem '/dev/ttyI0' ERROR[1024]: File chan_modem.c, Line 870 (load_module): Unable to register channel '/dev/ttyI0' WARNING[1024]: File loader.c, Line 273 (ast_load_resource): chan_modem.so: load...

...e only been working with Asterisk for a matter of days but have already grown into a big fan =) Much as I've managed to get internal calling working fine, I have a configuration running on an old PII-233 on RH9 with a (although not badged as is a) Dynalink IS64PH/Winbond W6692 PCI Card as /dev/ttyI0. The card works fine in minitel and dials out without a problem.. However try as I might I can't get the card to work within *, inbound or out. dmesg confirms the card's fine and is working out (and I think in too =)). The modem.conf is: [interfaces] context=remote driver=i4l dialtype=ton...