search for: chan_modem

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383 (modem_setup): Unable to autodetect modem. You'll need to specify a driver in modem.conf. Please report modem identification (Eicon ISDN Modem) and which driver works to markster@linux-support.net. WARN...

...sterisk PBX system. I already have the asterisk running on a regular PC. BUt when I run assterisk it fails at this point when it parse modules.conf file. [Wait] == Registered application 'Wait' Asterisk Dynamic Loader Starting: == Parsing '/etc/asterisk/modules.conf': Found [chan_modem.so]Illegal instruction I have played around with the file and have realzied if it runs successfully the chan_modem.so, then all other l;oadable modules are loaded. I even went to the extent of saying load module=no and copied/paste all the modules on the file! You know when are testing just ma...

Hi, I am currently running several * boxes on 1.0.9 with HFC chipset ISDN modems using i4l's hisax driver and chan_modem. Will I be able to use my existing chan_modem setup with 1.2.4 or 1.2.7 or will I need to change it to use bristuff or chan_capi? I want to do the upgrade with as little changes as possible. Thank you Marnus van Niekerk -- "Opportunity is missed by most people because it is dressed in o...

...= Registered application 'SetVar' [StripMSD] == Registered application 'StripMSD' [Suffix] == Registered application 'Suffix' [Wait] == Registered application 'Wait' Asterisk Dynamic Loader Starting: == Parsing '/etc/asterisk/modules.conf': Found [chan_modem.so] => (Generic Voice Modem Driver) == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_hcf.so => (hcfpcimodem-1.00lnxt03112100free) WARNING[-1085185920]: File chan_modem.c, Line 390 (modem_setup): No driver for modem type 'hcfpcimodem-1.00lnxt03112...

...mmediate ; ISDN example (using i4l) ; msn=0415040331 device => /dev/ttyI0 I noticed that my card was detected as eth1 by the system and not as ttyI0, How can I create ttyI0 devices? If I start Asterisk the error returned is: == Parsing '/etc/asterisk/modules.conf': Found [chan_modem.so] => (Generic Voice Modem Driver) == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) Jan 10 15:56:51 WARNING[13454]: chan_modem.c:727 mkif: Unable to open '/dev/ttyI0' Jan 10 15:56:51 ERROR[134...

...only a problem of concept, perhaps a wrong idea, only that. I please ask you to answer, because for me it's important to have everything more or less clear..... THANKS VERY MUCH in advance, and here they are, my two little questions... 1)As I have seen, to make Asterisk load chan_capi.so and chan_modem.so you must have: load=>chan_capi.so and load => chan_modem.so in your modules.conf. But I had understood some time ago that setting autoload => yes made Asterisk load every module that was necesary. Then, why must I load these channels explicitely? 2)For what is used the section [global]...

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misd...

Greetings, today I'm recompiling asterisk on a new machine with the same isdn card (not the same model, the *SAME* card) using CVS downloaded yesterday night. When I try to start *, it gives me the error: [chan_modem.so] => (Generic Voice Modem Driver) == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[1024]: File chan_modem_i4l.c, Line 144 (i4l_init): Unable to set to voice mode WARNING[1024]: File chan_modem.c,...

...l(Modem/ttyI1:037,20,r) ; when i dial 37 from kphone, it should use ttyI1 to call 037 on the ISDN bus --- But i get this error message: --- to 10.10.2.226:5060 -- Executing Dial("SIP/kphone-8c61", "Modem/ttyI1:037|20|r") in new stack Oct 16 07:34:21 WARNING[1113516976]: chan_modem.c:815 modem_request: Requested device 'ttyI1' does not existOct 16 07:34:21 NOTICE[1113516976]: app_dial.c:714 dial_exec: Unable to create channel of type 'Modem' == Everyone is busy/congested at this time Here is my modem.conf: --- [interfaces] context=remote driver=aopen ;...

Hi all, does anybody know if it is possible to make a modem connection (voice) through * over a handy which is connected to the RS232 port ? I get following messages when * starting: WARNING[16384]: File chan_modem.c, Line 356 (modem_setup): Modem reset failed: (No Response) WARNING[16384]: File chan_modem.c, Line 735 (mkif): Unable to configure modem '/dev/ttyS0' ERROR[16384]: File chan_modem.c, Line 871 (load_module): Unable to register channel '/dev/ttyS0' WARNING[16384]: File loader.c, Lin...

...chan_capi language=it type=autodetect stripmsd=0 dialtype=tone mode=immediate group=1 ; group=1,2,3,9-12 msn=734631522 device => /dev/ttyI0 ;device => /dev/ttyI1 but when i start asterisk -vvvc, i get: == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) Jul 25 11:47:32 WARNING[26639]: chan_modem_i4l.c:161 i4l_init: Unable to set to voice mode Jul 25 11:47:32 WARNING[26639]: chan_modem.c:406 modem_setup: Modem Initialization Failed on '/dev/ttyI0', driver i4l. Jul 25 11:47:32 WARNING[26639]: c...

...ly updated configuration of Diva TTY driver Successfully updated configuration of Diva MTPX driver Successfully updated configuration of Diva CAPI driver My modules.conf seems correct: ================================================= [....] noload => app_intercom.so ; ; Explicitly load the chan_modem.so early on to be sure ; it loads before any of the chan_modem_* 's afte rit ; ;load => chan_modem.so ;load => res_musiconhold.so load => chan_capi.so ; ; Load either OSS or ALSA, not both ; By default, load OSS only (automatically) and do not load ALSA ; noload => chan_alsa.so nolo...

...interface by using a bluetooth dongle to connect to the ISDN access point? Here follow the details: I have compiled and configured asterisk. Everything seems fine except that when I configure asterisk to use the ISDN interface, it fails with the following message: .... == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) Jun 23 01:00:24 WARNING[16384]: chan_modem_i4l.c:144 i4l_init: Unable to set to voice mode Jun 23 01:00:24 WARNING[16384]: chan_modem.c:396 modem_setup: Modem Initialization Failed on '/dev/ttyI0', driver i4l. Jun 23 01:00:24 WARNING[16384]: c...

...n't load the KDE console since ; it's not as sophisticated right now. ; noload => pbx_gtkconsole.so ;load => pbx_gtkconsole.so noload => pbx_kdeconsole.so ; ; Intercom application is obsoleted by ; chan_oss. Don't load it. ; noload => app_intercom.so ; ; Explicitly load the chan_modem.so early on to be sure ; it loads before any of the chan_modem_* 's afte rit ; load => chan_modem.so load => res_musiconhold.so ; ; Load either OSS or ALSA, not both ; By default, load OSS only (automatically) and do not load ALSA ; noload => chan_alsa.so noload => chan_oss.so load...

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

...with a costumised driver that I found on the asterisk-users archive*) voice modem but the voice from the PSTN is not routed thought the SIP channels, you can only hear it in the modem's speaker. Does anyone know how to fix the problem... modified this function in: /usr/src/asterisk/channels/chan_modem.c int ast_modem_send(struct ast_modem_pvt *p, char *cmd, int len) { int i; usleep(5000); if (!len) { for(i = 0; cmd[i];) { if (fwrite(cmd + i,1,1,p->f) != 1) { if (errno == EWOULDBLOCK) continue; return -1;...

Hi I tried to install the * in my Radhat 7.3 machine. The "gmake" and "gmake install" went fine, but "gmake sample" gave me errors of "configs/*.adsi", "sounds/demo-*" and "sounds/*.mp3" errors. I created a dummy.adsi in the configs folder and commented out the "sounds/demo-*" and "sounds/*.mp3" in the Makefile to

Hi, maybe this has been asked before but I couldnt find a proper answer on the web or list. I want to use a analog V.92 modem to make outgoing (and possibly) incoming phone call through a standard analog phone line. I found on web it's easy been done via chan_modem.so module. But this seems removed from asterisk or buggy. So my questions are can I enable chan_modem.so to be built or what other way to connect a modem to asterisk ? Thanks in advance, Ronny -- Ronny Forberger Systemadministration & IT-Support elego Software Solutions GmbH Gustav-M...

Hello list, Why PC modems were not used as FXO devices? Why chan_modem was deprecated? it seemed a nicer option instead of buying expensive gateways. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090802/abb21767/attachment.htm

...n't load the KDE console since ; it's not as sophisticated right now. ; noload => pbx_gtkconsole.so ;load => pbx_gtkconsole.so noload => pbx_kdeconsole.so ; ; Intercom application is obsoleted by ; chan_oss. Don't load it. ; noload => app_intercom.so ; ; Explicitly load the chan_modem.so early on to be sure ; it loads before any of the chan_modem_* 's afte rit ; noload => chan_modem.so noload => chan_modem_aopen.so noload => chan_modem_bestdata.so noload => chan_modem_i4l.so load => res_musiconhold.so ; ; Load either OSS or ALSA, not both ; By default, load OS...