This for the archives in case it may help someone:
I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP
7.1 as follows:
1. Installed 7.1 images from the Cisco zip file to the TFTP server.
2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and
SIPDefault.cnf
3. For the older of the two phones, renamed P003-07-1-00.bin to
P0S3-07-.bin, making it an 8.3 filename as expected by the version 3
firmware. For the later (apparently new enough to handle long
filenames), renamed it to P0S3-07-1-00.bin. No, that's NOT a misprint.
I renamed P003-07-1-00.bin to P0S3-07-.bin -- in Version 7.1, P003 isn't
the Call Manager software, it's the Universal Application Loader that
needs to load first to install everything else.
4. Rebooted the phones.
Jim Shilliday
IT Director
Equal Justice Center
1315 Walnut St. Suite 400
Philadelphia PA 19107
215-238-6970
-----Original Message-----
From: Daniel Poulsen [mailto:dpoulsen@gmail.com]
Sent: Monday, September 20, 2004 3:36 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: mboehm@cytelcom.com
Subject: Re: [Asterisk-Users] Re: cisco 7960 CTLSEP
I had this same problem and I only found out how to upgrade the phones
by trial an error. I even opened a Cisco case to get help on it but
they couldn't help me!
I think the problem is that 79xx firmware prior to 7.x doesn't know to
look for the .loads file, and without the loads file it will only load
the SCCP .sbn file. It need the loads file to load the SIP .sb2 file.
This is contrary to Cisco docs, but this is how I did it.
1. Expand the 7.2 firmware files into the tftp-root.
2. By default OS79XX.txt has P003-07-2-00. Change this to
P0S3-07-2-00, but leave the image_version in your SIPDefaults set to
P003-07-2-00.
3. Reboot. The phone will load an image and you will get the protocol
invalid error as noted earlier in this thread.
4. Change your SIPDefauls.cnf to P0S3-07-2-00.
5. Reboot. The phone will look for the loads file and load the proper
sb2 image bringing you to version 7.2.
Dan
On Mon, 20 Sep 2004 10:58:54 +0200, Jan Baggen <jbaggen@ip2.nl>
wrote:>
> >I have about 10 of these phones. All of them started with sccp
firmware on> >them. I used the XMLDefault.xml file to upgrade them all to SIP 3.7.
The> >phones "should" look for a CTL<mac> file, then a
SEP<mac>, then
SIP<mac>.> >XMLDefault.xml should be in there somewhere.
> >
> >I've never had to 'trick' my phones. All of them started
with sccp
firmware> >on them. I used the XMLDefault.xml file to upgrade them. You do have
all> the
> >firmware files in your tftp directory right?
> >
> >None of my phones have EVER looked for that OS79XX.txt file. I
chunked it.> >
> >I can send you SIP<mac> files for configuration if you need.
> >
> >Matthew
>
> Yes, please send me your configuration files. CTLSEP<mac>.tnl
SEP<mac>
> and SIP<mac>
>
> The SIP fimware is on my TFTP server.
>
> Thank you!
>
>
>
> ---
> Jan Baggen - jbaggen@ip2.nl
> IP2 Internet BV / http://www.ip2.nl
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
