search for: p003

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've tried every imaginable <loadinformation...

...2. Specify the image in the configuration file image parameter for the protocol to which you are converting (load_information for SCCP or image_version for SIP). 3. Remove any protocol configuration files that are not used for the specified protocol. Firmware versions are P003F300 (Application Load ID) and PC030300 (Boot Load ID). In TFTP root directory, the following files are present: OS79XX.TXT P003-07-5-00.bin P003-07-5-00.sbn P0S3-07-5-00.bin P0S3-07-5-00.sbn P0S3-07-5-00.loads SIP<MAC Addres>.cnf SIPDefault.cnf On boot, I can see in my TFTP logs the phone is...

.... I'm trying to verify that's what I need befor I start hounding them. -JB Hawaii John Bittner wrote: >John, > >You have to go to 7.1 before 7.3 >Also look at this. >http://www.voip-info.org/wiki-Asterisk+phone+cisco+79xx >Note:(The 7.1 image upload needs to be spelled P003-07-1-00 >in the OS79XX.TXT and P0S3-07-1-00 in the SIPDefault.cnf) > >Hope this helps > >JB > > > > >>-----Original Message----- >>From: asterisk-users-bounces@lists.digium.com >>[mailto:asterisk-users-bounces@lists.digium.com] On Behalf >>...

...P server. The 4 original Cisco's work fine still. The Polycom IP500's work fine. The problem is with trying to get this new Cisco 7960 online... It came pre-loaded with the SCCP image and I cannot get it to convert to SIP. Currently it is running the following versions: App Load ID: P0030301MFG2 Boot Load ID: PC0303010200 Version: 3.1(MF.G2) The phone contacts the DHCP server and gets an IP successfully. The dhcpd.conf file: ############################################################################## # dhcpd.conf - dhcp config file for eth1 / sip phones ####################...

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it an 8.3 filenam...

...RRQ "CTLSEP001121F12961.tlv" 17:57:53.517099 x.x.x.1.50927 > x.tftp: 31 RRQ "CTLSEP00115C330355.tlv" How to load the SIP image on these phones? The TFTP directory: -rw-r--r-- 1 root wheel 13 Sep 17 17:12 OS79XX.TXT -rw-r--r-- 1 root wheel 124716 Aug 13 19:23 P003-07-2-00.bin -rw-r--r-- 1 root wheel 125120 Aug 13 19:24 P003-07-2-00.sbn -rw-r--r-- 1 root wheel 124716 Aug 13 19:23 P0S3-07-2-00.bin -rw-r--r-- 1 root wheel 461 Aug 13 19:44 P0S3-07-2-00.loads -rw-r--r-- 1 root wheel 587122 Aug 13 19:40 P0S3-07-2-00.sb2 -rw-r--r-- 1 root w...

...e just restarted. By looking on the TFTP logs and tcpump output, i've seen that the phone crashed and restarted just after downloading the OS79XX.TXT file, without requesting the image file at any moment. If i'm putting a SCCP image file name (without ext.) on the OS79XX.TXT (begining with P003), the phone doesn't crash and request the respective SEP<mac>.xml file. Unfortunately (again), just after downloading the xml configuration it hang and restart. I've checked the syntax and they's no error on it, if they's one the phone output the error on the display without c...

...o 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you can give me a hint. I added the files to my tftpd folder, changed the version-number in the file OS79XX.TXT - from P003-07-1-00 to P003-07-2-00 In my SIPDefault.cnf i changed the image_version from P0S3-07-1-00 to image_version: P0S3-07-2-00 Then I reboot it, and it loads the SIP<MAC address>.cnf - and reboots - and this goes on forever, or until i change the image_version number back to P0S3-07-1-00. What...

...ental upgrades from 3.1 -> 5.3 -> 7.5, with no luck. It goes to Upgrading Software and sits there endlessly redownloading the same file. It seems to stall going no-where .. Any one successfully upgraded the phones from default? What are any of the specifics. With the 5x series do I need the P003-05 in the OS79XX.TXT file or still the P0S3 ? Anyone have any ideas as to what I should do? I can't seem to get the pre 5x versions of the software any more. Seems with my contract I can only downgrade to 5x series. All that shows on the Cisco CCO site. Please let me know Thanks...

...inux-9pg5 atftpd[18825]: Serving SEPDefault.cnf to 192.168.1.3:52182 as you see my phone request 4 files that doesn't comes in archive P0S3-08-11-00.zip: SEP00141CAA4B4C.cnf.xml, XMLDefault.cnf.xml, SEP00141CAA4B4C.cnf, SEPDefault.cnf... while my archive contents is the following: OS79XX.TXT, P003-08-11-00.bin, P003-08-11-00.sbn, P0S3-08-11-00.loads, P0S3-08-11-00.sb2 3.) I want to make this phone to be SIP compatible. A friend of main gave me a .cnf file with an example of configuration for SIP. How may I rename this cnf file to make work with my phone. 4.) On the other side my phone does...

Hi everyone. I've just tried installing the SIP image and i'm getting a very odd error. It says: Configuring VLAN then Configuring IP then Protocal Application Invalid Help!!!! Matt

I have 4 7960's that I am trying to get working but 2 of them will not update to the SIP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami

Hi everyone, I'd say this question has come up and been answered before but I haven't been able to find it. I have a Cisco 7940 that I've upgraded to SIP firmware (currently P0S-3-06-3-00 - for some reason there was a failure when trying to upgrade to V7 so I left it at V6). The problem I'm having is that when I connect to voicemail the DTMF key presses dont seem to work

Does anyone know if version 3.1 is Call Manager or SIP? Thanks.

G'Day All. So I got the TFTP server all set up -thanks to much help from this list- the 7960 found it and updated to SIP the first firmware P0S30200. What I am now trying to do is upgrate through all the versions, as recommended, to the latest version, P003-07-3-00. I thought this would be accomplished by simply changing the sole line in the OS79XX.TXT file to P0S30203 and reboot the phone. But no success. Any pointers? Thanks Ferg

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

Hi All, Just a heads up - I was looking around the Cisco FTP a little while ago and noticed that the SIP 7.2 images for Cisco IP Phone 7940/7960 were released yesterday (16th August). No new features - all bug fixes according to the release notes. I've already started using it. I thought those of you running the Cisco phones and the appropriate access who didn't yet know would like to

<div><br><div><br><br><br><br><br><font color="#990099"><br></font><blockquote style="border-left: 2px solid rgb(0, 0, 0); padding-right: 0px; padding-left: 5px; margin-left: 5px; margin-right: 0px;"><div><div><br> <asterisk-users-request

I have a Cisco 7940G IP Phone. I am trying to load the firmware to SIP 3.2. The Phone just hangs in Defaulting CM to TFTP Server. It doesn't do anything else after that. I also have two other 7940g's that are the Universal Application Loader mode and say Protocol Application Invalid. I need to know what I can do to fix both these problems. I am running Asterisk@Home version 1.0. I have to