search for: image_version

...post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you can give me a hint. I added the files to my tftpd folder, changed the version-number in the file OS79XX.TXT - from P003-07-1-00 to P003-07-2-00 In my SIPDefault.cnf i changed the image_version from P0S3-07-1-00 to image_version: P0S3-07-2-00 Then I reboot it, and it loads the SIP<MAC address>.cnf - and reboots - and this goes on forever, or until i change the image_version number back to P0S3-07-1-00. What am i doing wrong - I just can't figure it out. Best regards Michael...

...D N 5060 UNKNOWN ... What am I missing? Best regards, Lukasz sip.conf: [55] type=friend defaultuser=55 secret=12345655 context=home_castle callerid="Lukasz Cisco 7960" <55> canreinvite=no host=dynamic dtmfmode=rfc2833 qualify=200 mailbox=55 SIPDefault.cnf: image_version: P0S3-8-12-00 proxy1_address: 192.168.1.109 ; Can be dotted IP or FQDN proxy_register: 1 messages_uri: 80 phone_password: cisco ; Limited to 31 characters (Default - cisco) sntp_mode: directedbroadcast ;"unicast" sntp_server: 192.168.1.77 time_zone: GMT+01/00 ; assuming you're in GM...

...0094584.shtml#sccptosip2, I got the following: 1. Copy the desired binary image from Cisco.com to the root directory of the TFTP server. 2. Specify the image in the configuration file image parameter for the protocol to which you are converting (load_information for SCCP or image_version for SIP). 3. Remove any protocol configuration files that are not used for the specified protocol. Firmware versions are P003F300 (Application Load ID) and PC030300 (Boot Load ID). In TFTP root directory, the following files are present: OS79XX.TXT P003-07-5-00.bin P003-07-5-00.sbn P0S3...

Hi All, Just a heads up - I was looking around the Cisco FTP a little while ago and noticed that the SIP 7.2 images for Cisco IP Phone 7940/7960 were released yesterday (16th August). No new features - all bug fixes according to the release notes. I've already started using it. I thought those of you running the Cisco phones and the appropriate access who didn't yet know would like to

Hi everyone, I'd say this question has come up and been answered before but I haven't been able to find it. I have a Cisco 7940 that I've upgraded to SIP firmware (currently P0S-3-06-3-00 - for some reason there was a failure when trying to upgrade to V7 so I left it at V6). The problem I'm having is that when I connect to voicemail the DTMF key presses dont seem to work

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

...the tftp server. What gives? How do I get this phone to download the SIP firmware? Best, Max -- Max Clark max [at] clarksys.com http://www.clarksys.com -------------- next part -------------- P0S3-06-3-00 -------------- next part -------------- # SIP Configuration Generic File (start) image_version: P0S3-06-3-00 preferred_codec: g711ulaw #preferred_codec: g729a # Proxy Server proxy1_address: "10.6.0.223" proxy2_address: "" proxy3_address: "" proxy4_address: "" proxy5_address: "" proxy6_address: "" # Line 1 Settings line1_name: &quo...

...to register (confirmed with 'sip debug' on the Asterisk server, and 'debug sip-messages' on the phone itself.) I'm hoping I'm not the only one to have ever had this problem, and would love it if someone could help. As promised, here are my conf files: SIPDefault.cnf: image_version:P0S3-07-4-00 proxy1_address:asterisk.xxxx.com telnet_level:2 SIP<macaddress>.cnf line1_name:username line1_authname:username line1_password:password user_info:none -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/a...

...xten => 101,n,GotoIf($["${DIALSTATUS}" = "NOANSWER"]?lbl_default_1:) exten => 101,n(lbl_default_0),Hangup() exten => 101,n(lbl_default_1),Dial(SIP/9046260700 at vitel-outbond,30) exten => 101,n,Goto(lbl_default_0) Cisco phone stuff from a Cisco 7960: SIPDefault.cnf image_version: P0S3-08-9-00 proxy1_address: neocipher.net ; Can be dotted IP or FQDN proxy_register: 1 messages_uri: "100" phone_password: "cisco" ; Limited to 31 characters (Default - cisco) sntp_server: 10.10.10.1 time_zone: EST dial_template: DIALPLAN nat_enable: 1 nat...

I know this is a little off list but I can't think of a better place to ask this question. I upgrade the phone to 7.1 and it installed the Universal Application Loader. Now I'm getting Protocol Application Invalid after it reads tftp SIP(MAC).cnf Any ideas? Again sorry this is off topic

I can't get my 7960 to upgrade to 7.2 or infact downgrade to 6.3 either. when I change image_version to the 7.2 string in sipdefault.cnf it reboots but does not look for any image files it just looks for the same files as it normally does. Any ideas? it seems as though I have locked the firmare. Chris

...28 14:26:27 NOTICE[4888] chan_sip.c: Registration from 'sip:8115552368@ev01b.networkpts.com' failed for '64.169.xx.yyy' - Username/auth name mismatch What's the right way to do this. Shown below are my configuration files: </edg> -----SIPDefault and SIPMacAddr ----- image_version: P0S3-07-4-00 tftp_cfg_dir: "" ; Example: ./sip_phone/ proxy_register: 1 timer_register_expires: 3600 dial_template: dialplan messages_uri: 3688 telnet_level: 2 phone_label: "Nat One" line1_name: 3115552368 line1_shortname: 3115552368 line1_authname: 3115552368 l...

This I am sure is a very easy question, but I can't seem to find the answer. Here is the scenario: cisco 7940g phone has SIP 6.3 firmware applied the file SIP<mac>.cnf does not seem to have a place for it: image_version: P0S3-06-3-00 #line 1 settings line1_name: "5010" ; Line 1 ExtensionUser ID line1_displayname: "5010" ; Line 1 Display Name line1_authname: "5010" ; Line 1 Registration Authentication line1_password: "cisco" ; Line...

Hi All, My current 7940 phones use P0S3-06-3-00. I'd like to upgrade them so they're not massively out of date. I found a page at http://www.voip-info.org/wiki-Asterisk+phone+cisco+79xx that gives some info, and using the cisco links there have tried to upgrade. According to the procedures, I should be able to upgrade, but once the phones loaded and reboots it says it downgrades

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it an 8.3 filename as expected by the version 3 firmware. For the later (apparently new enough to handle long filenames), renamed it to P0S3-07-1-00.bi...

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

...ting the firmware (blah, I love Cisco but these phones are a joke for support). This works for me! Good luck. sip.conf [107] host=dynamic type=friend context=default username=107 secret=blahblah mailbox=107 canreinvite=no disallow=all allow=all -------------------------- -sipMACADDRESS.cnf- image_version: P0S3-07-3-00 line1_name: 107 # Line 1 Registration Authentication line1_authname: "107" # Line 1 Registration Password line1_password: "elblahblah" --snip-- ####### New Parameters added in Release 2.0 ####### # All user_parameters have been removed # Phone Label (Tex...

Hi, I have a problem with Cisco 7906G and SIP protocol use with Asterisk 1.2.26. I have uploaded in my tftp server the firmware 'cmterm-7911_7906-sip.8-0-4SR1' that use 'SIP11.8-0-4SR1S.loads' and in SEPmacaddress.cnf.xml I have: <loadInformation>SIP11.8-0-4SR1S</loadInformation> ..but in tftp log server I have: Oct 07 11:56:22 asterisk1.local

I'm starting out w/ a Cisco 7940, running the Sip image version 6.3. I've downloaded/installed asterisk via cvs. I've set the phone up to get its info via dhcp - the dhcp, tftp, astericks box & phone are on the same network. I've gone through and setup a test account per the instructions @ http://voip-info.org/wiki-Asterisk+phone+cisco+79xx but time I do a sip show

I have 4 7960's that I am trying to get working but 2 of them will not update to the SIP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami