search for: xmldefault

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after XMLDefault.cnf.xml (se...

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

...xml In the SEP<mac>.cnf.xml I'm assuming that in the <loadInformation> line I should be selecting one of these files, however when I've tried all these files I just get the message 'Load ID Incorrect' on the phone. If someone could post their SEP<mac>.cnf.xml and xmlDefault.CNF.XML files I'd be very grateful as I'm sure I'm just missing something obvious but just can't find it at the moment. Also there seems to be different versions of the xmlDefault.CNF.XML or XMLDefault.cnf.xml files regarding the case it should be in, could someone advise which the...

...isco phone isn't authenticated on Asterisk. In tftp directory I have: apps41.1-1-1-15.sbn cnu41.3-1-1-15.sbn copstart.sh cvm41sip.8-0-1-18.sbn dialplan.xml dsp41.1-1-1-15.sbn jar41sip.8-0-1-18.sbn load115 load308 load309 load30018 SIP41.8-0-2SR1S.loads term41.default.loads term61.default.loads XMLDefault.cnf SEPmac_address.cnf.xml ..and in tftp log I have: Connection received from 192.168.1.61 on port 49153 [19/06 10:16:35.968] Read request for file <CTLSEPmac_address.tlv>. Mode octet [19/06 10:16:35.968] File <CTLSEPmac_address.tlv> : error 2 in system call CreateFile Impossibile t...

...not found) to 192.168.10.103 Jun 17 09:38:11 firewall in.tftpd[22669]: RRQ from 192.168.10.103 filename SEP6C504DDAF067.cnf.xml.sgn Jun 17 09:38:11 firewall in.tftpd[22669]: sending NAK (1, File not found) to 192.168.10.103 Jun 17 09:38:11 firewall in.tftpd[22671]: RRQ from 192.168.10.103 filename XMLDefault.cnf.xml.sgn Jun 17 09:38:11 firewall in.tftpd[22671]: sending NAK (1, File not found) to 192.168.10.103 Jun 17 09:38:12 firewall in.tftpd[22672]: RRQ from 192.168.10.103 filename CTLSEP6C504DDAF067.tlv Jun 17 09:38:12 firewall in.tftpd[22672]: sending NAK (1, File not found) to 192.168.10.103 Jun 1...

...re's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've tried every imaginable <loadinformation> parameter, and can't get the phone to actually grab the image, it just keeps redownloading the XML file. If I put "P0S3-07-1-00" in OS79XX.TXT, the phone wants to download P0S3-07-1-00.sbn, which I don't have. If...

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24 WARNING[1357974832]: File chan_skinny....

...in my tftp directory. Here's my tftp output session with my phone: Feb 13 11:19:36 linux-9pg5 atftpd[18825]: Serving OS79XX.TXT to 192.168.1.3:52178 Feb 13 11:19:36 linux-9pg5 atftpd[18825]: Serving SEP00141CAA4B4C.cnf.xml to 192.168.1.3:52179 Feb 13 11:19:36 linux-9pg5 atftpd[18825]: Serving XMLDefault.cnf.xml to 192.168.1.3:52180 Feb 13 11:19:36 linux-9pg5 atftpd[18825]: Serving SEP00141CAA4B4C.cnf to 192.168.1.3:52181 Feb 13 11:19:36 linux-9pg5 atftpd[18825]: Serving SEPDefault.cnf to 192.168.1.3:52182 as you see my phone request 4 files that doesn't comes in archive P0S3-08-11-00.zip: SEP...

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal

...The phone will look for the loads file and load the proper sb2 image bringing you to version 7.2. Dan On Mon, 20 Sep 2004 10:58:54 +0200, Jan Baggen <jbaggen@ip2.nl> wrote: > > >I have about 10 of these phones. All of them started with sccp firmware on > >them. I used the XMLDefault.xml file to upgrade them all to SIP 3.7. The > >phones "should" look for a CTL<mac> file, then a SEP<mac>, then SIP<mac>. > >XMLDefault.xml should be in there somewhere. > > > >I've never had to 'trick' my phones. All of them started w...

I've got a Cisco 7970 that's not completing its network registration to Asterisk. The "Registering" message stays on the screen (with the moving time wheel). After a few minutes, the onscreen message flashes "Updating CTL" then "Loading...", then the status messages update with: No valid CAPF server File Not Found: CTLFile.tlv No CTL installed

Ok I've got SCCP running I have my 7970 firmware files. Can anyone send an XMLdefault config and an SEP config file? There are a bunch of sbn files in the package...not sure what needs to be loaded. -Darren

.... The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following XMLDefault.cnf.xml: <Default> <callManagerGroup> <members> <member priority="0"> <callManager> <ports> <ethernetPhonePort>2000</ethernetPhonePort> </ports> <processNodeName>10.123.123.33</processNodeName> </callManager> </m...

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any recommendations based on the XML configuration below? Thanks. <device> <deviceProtocol>SIP</deviceProtocol> <devicePool> <callManagerGroup> <members> <membe...

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk" page) - worked fine once I had all the capital letters in the right place ;-) This does not use the OS79XX.TXT file as far as I can under...

2 new Cisco 7960 phones are requesting a CTLSEP file, seems like I triggered the universal application loader. I want to load the sip image 7.2 According to this Cisco information: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps4967/products_upgr ade_guides09186a008022a968.html#wp1047292 If the CTLSEP MAC file is not present or is empty, the phone proceeds in nonsecure mode with the

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

...ipping > the zip file: > > > > apps41.8-5-2TH1-9.sbn > > cnu41.8-5-2TH1-9.sbn > > cvm41sip.8-5-2TH1-9.sbn > > dsp41.8-5-2TH1-9.sbn > > jar41sip.8-5-2TH1-9.sbn > > SIP41.8-5-2S.loads > > term41.default.loads > > term61.default.loads > > XMLDefault.cnf.xml > > SEP[_MAC-ADDR_].cnf.xml > > > > I provide samples of the last two files on the blog > post mentioned earlier.? The last file, that starts > with SEP, should contain the actual mac address of the phone > you are trying to provision.? So, for example, it would...

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

I have a Cisco 7940G IP Phone. I am trying to load the firmware to SIP 3.2. The Phone just hangs in Defaulting CM to TFTP Server. It doesn't do anything else after that. I also have two other 7940g's that are the Universal Application Loader mode and say Protocol Application Invalid. I need to know what I can do to fix both these problems. I am running Asterisk@Home version 1.0. I have to