Manuel Antonio Casal Hernández
2005-Mar-10 13:10 UTC
[Asterisk-Users] QuadBRI ,TDM400 and SuSE9.2
Hi all, We need help with our SuSe9.2 asterisk box We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone. We have downloaded the bristuff (0.2.0-RC7j) and installed it without problems. once we downloaded and compiled asterisk, zaptel and all other stuff, the module installation succed in this order: modprobe zaptel modprobe qozap modprobe wcfsx then the ztcfg output this: Zaptel Configuration ===================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: D-channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: D-channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: D-channel (Default) (Slaves: 12) Channel 13: FXO Kewlstart (Default) (Slaves: 13) Channel 14: FXO Kewlstart (Default) (Slaves: 14) Channel 15: FXO Kewlstart (Default) (Slaves: 15) Channel 16: FXO Kewlstart (Default) (Slaves: 16) 16 channels configured. but when we start asterisk it stops at zapata.conf parsing: [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found Mar 11 20:29:37 ERROR[5512]: chan_zap.c:6467 mkintf: Unable to get parameters Mar 11 20:29:37 ERROR[5512]: chan_zap.c:10247 setup_zap: Unable to register channel '1-2' Mar 11 20:29:37 WARNING[5512]: loader.c:345 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Mar 11 20:29:37 WARNING[5512]: loader.c:440 load_modules: Loading module chan_zap.so failed! Any kind of suggestions or help will be welcome, We are stucked and dessesperated with this issue...:( Thanks very much in advance for your help. ------ zaptel.conf #loadzone=no #defaultzone=us loadzone=nl defaultzone=nl # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2,4,5,7,8,10,11 dchan=3,6,9,12 fxoks=13-16 ------ zapata.conf context=RDSI group = 1 ; S/T port 1 channel => 1-2 ; S/T port 2 channel => 4-5 ; S/T port 3 channel => 7-8 ; S/T port 4 channel => 10-11 switchtype =fxo_ks context=EXTENSIONES group = 2 channel =>13-16 ------ extensions.conf [RDSI] exten => _X.,1,Dial(ZAP/g2/${EXTEN},60) exten => _X.,2,Hangup [EXTENSIONES] exten => _X.,1,Dial(ZAP/g1/${EXTEN},60) exten => _X.,2,Hangup ; if the called party is busy exten => _X.,102,Playtones(busy) exten => _X.,103,Wait(10) exten => _X.,104,Hangup ; if all zaptel channels in that group are in use ; or the D channels are down exten => _X.,202,Playtones(congestion) exten => _X.,203,Wait(10) exten => _X.,204,Hangup ------ asterisk output [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found Mar 11 20:29:37 ERROR[5512]: chan_zap.c:6467 mkintf: Unable to get parameters Mar 11 20:29:37 ERROR[5512]: chan_zap.c:10247 setup_zap: Unable to register channel '1-2' Mar 11 20:29:37 WARNING[5512]: loader.c:345 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Mar 11 20:29:37 WARNING[5512]: loader.c:440 load_modules: Loading module chan_zap.so failed! -- Manuel Casal Hern?ndez mach@e-sistemas.net ----------------------------- Dep. Desarrollo y Consultor?a Sistem@s.NET http://www.e-sistemas.net info@e-sistemas.net (T) 902 678 006 -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 2785 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050310/a4a999f3/smime.bin
Manuel Antonio Casal Hernández
2005-Mar-10 13:13 UTC
[Asterisk-Users] QuadBRI ,TDM400 and SuSE9.2
Hi all, We need help with our SuSe9.2 asterisk box We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone. We have downloaded the bristuff (0.2.0-RC7j) and installed it without problems. once we downloaded and compiled asterisk, zaptel and all other stuff, the module installation succed in this order: modprobe zaptel modprobe qozap modprobe wcfsx then the ztcfg output this: Zaptel Configuration ===================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: D-channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: D-channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: D-channel (Default) (Slaves: 12) Channel 13: FXO Kewlstart (Default) (Slaves: 13) Channel 14: FXO Kewlstart (Default) (Slaves: 14) Channel 15: FXO Kewlstart (Default) (Slaves: 15) Channel 16: FXO Kewlstart (Default) (Slaves: 16) 16 channels configured. but when we start asterisk it stops at zapata.conf parsing: [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found Mar 11 20:29:37 ERROR[5512]: chan_zap.c:6467 mkintf: Unable to get parameters Mar 11 20:29:37 ERROR[5512]: chan_zap.c:10247 setup_zap: Unable to register channel '1-2' Mar 11 20:29:37 WARNING[5512]: loader.c:345 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Mar 11 20:29:37 WARNING[5512]: loader.c:440 load_modules: Loading module chan_zap.so failed! Any kind of suggestions or help will be welcome, We are stucked and dessesperated with this issue...:( Thanks very much in advance for your help. ------ zaptel.conf #loadzone=no #defaultzone=us loadzone=nl defaultzone=nl # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2,4,5,7,8,10,11 dchan=3,6,9,12 fxoks=13-16 ------ zapata.conf context=RDSI group = 1 ; S/T port 1 channel => 1-2 ; S/T port 2 channel => 4-5 ; S/T port 3 channel => 7-8 ; S/T port 4 channel => 10-11 switchtype =fxo_ks context=EXTENSIONES group = 2 channel =>13-16 ------ extensions.conf [RDSI] exten => _X.,1,Dial(ZAP/g2/${EXTEN},60) exten => _X.,2,Hangup [EXTENSIONES] exten => _X.,1,Dial(ZAP/g1/${EXTEN},60) exten => _X.,2,Hangup ; if the called party is busy exten => _X.,102,Playtones(busy) exten => _X.,103,Wait(10) exten => _X.,104,Hangup ; if all zaptel channels in that group are in use ; or the D channels are down exten => _X.,202,Playtones(congestion) exten => _X.,203,Wait(10) exten => _X.,204,Hangup ------ asterisk output [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found Mar 11 20:29:37 ERROR[5512]: chan_zap.c:6467 mkintf: Unable to get parameters Mar 11 20:29:37 ERROR[5512]: chan_zap.c:10247 setup_zap: Unable to register channel '1-2' Mar 11 20:29:37 WARNING[5512]: loader.c:345 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Mar 11 20:29:37 WARNING[5512]: loader.c:440 load_modules: Loading module chan_zap.so failed! -- Manuel Casal Hern?ndez mach@e-sistemas.net ----------------------------- Dep. Desarrollo y Consultor?a Sistem@s.NET http://www.e-sistemas.net info@e-sistemas.net (T) 902 678 006
On Thu, 10 Mar 2005 21:10:54 +0100 Manuel Antonio Casal Hern?ndez <mach@e-sistemas.net> wrote:> Hi all, > > We need help with our SuSe9.2 asterisk box > We have one QuadBRI and one TDM40B in an ASUS pundit R-2 >barebone. > We have downloaded the bristuff (0.2.0-RC7j) and >installed it without problems. > once we downloaded and compiled asterisk, zaptel and all >other stuff, the module installation succed in this >order: > > modprobe zaptel > modprobe qozap > modprobe wcfsx > > then the ztcfg output this: > > Zaptel Configuration > =====================> > SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) > SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) > SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1) > SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1) > > Channel map: > > Channel 01: Individual Clear channel (Default) (Slaves: >01) > Channel 02: Individual Clear channel (Default) (Slaves: >02) > Channel 03: D-channel (Default) (Slaves: 03) > Channel 04: Individual Clear channel (Default) (Slaves: >04) > Channel 05: Individual Clear channel (Default) (Slaves: >05) > Channel 06: D-channel (Default) (Slaves: 06) > Channel 07: Individual Clear channel (Default) (Slaves: >07) > Channel 08: Individual Clear channel (Default) (Slaves: >08) > Channel 09: D-channel (Default) (Slaves: 09) > Channel 10: Individual Clear channel (Default) (Slaves: >10) > Channel 11: Individual Clear channel (Default) (Slaves: >11) > Channel 12: D-channel (Default) (Slaves: 12) > Channel 13: FXO Kewlstart (Default) (Slaves: 13) > Channel 14: FXO Kewlstart (Default) (Slaves: 14) > Channel 15: FXO Kewlstart (Default) (Slaves: 15) > Channel 16: FXO Kewlstart (Default) (Slaves: 16) > > 16 channels configured. > > but when we start asterisk it stops at zapata.conf >parsing: > > [chan_zap.so] => (Zapata Telephony w/PRI) > == Parsing '/etc/asterisk/zapata.conf': Found > Mar 11 20:29:37 ERROR[5512]: chan_zap.c:6467 mkintf: >Unable to get parameters > Mar 11 20:29:37 ERROR[5512]: chan_zap.c:10247 setup_zap: >Unable to register channel '1-2' > Mar 11 20:29:37 WARNING[5512]: loader.c:345 >ast_load_resource: chan_zap.so: load_module failed, >returning -1 > == Unregistered channel type 'Tor' > == Unregistered channel type 'Zap' > Mar 11 20:29:37 WARNING[5512]: loader.c:440 >load_modules: Loading module chan_zap.so failed! > > > Any kind of suggestions or help will be welcome, We are >stucked and dessesperated with this issue...:( > > Thanks very much in advance for your help. > > ------ zaptel.conf > > #loadzone=no > #defaultzone=us > loadzone=nl > defaultzone=nl > # qozap span definitions > # most of the values should be bogus because we are not >really zaptel > > span=1,1,3,ccs,ami > span=2,0,3,ccs,ami > span=3,0,3,ccs,ami > span=4,0,3,ccs,ami > > bchan=1,2,4,5,7,8,10,11 > dchan=3,6,9,12 > fxoks=13-16 > > ------ zapata.conf > > context=RDSI > group = 1 > ; S/T port 1 > channel => 1-2 > > ; S/T port 2 > channel => 4-5 > > ; S/T port 3 > channel => 7-8 > > ; S/T port 4 > channel => 10-11 > > switchtype =fxo_ks > context=EXTENSIONES > group = 2 > channel =>13-16 ><snip> IS this all you have inb your zapata.conf??? There should be more. Most notable a [channels] header to show that the info below are for defining the channels.