search for: qozap

...emo menu. The drivers compile (with a few warning that I believe aren't important - see attachments). chan_zap comiles with the warning: chan_zap.c: In function `pri_dchannel': chan_zap.c:6344: warning: passing arg 1 of `pbx_builtin_setvar_helper' from incompatible pointer type The qozap driver appears to load correctly and I get this in the log : Apr 1 17:51:07 debian kernel: Zapata Telephony Interface Registered on major 196 Apr 1 17:51:07 debian kernel: qozap: start Apr 1 17:51:07 debian kernel: PCI: Enabling device 00:0b.0 (0000 -> 0003) Apr 1 17:51:07 debian kernel: P...

Hi, I had problems described in another thread so went from a start, but now have problems when loading qozap module. I get : # insmod qozap.ko ports=9 insmod: error inserting 'qozap.ko': -1 Unknown symbol in module and in /var/log/messages: module qozap unsupported by SUSE/Novell, tainting kernel. qozap: disagrees about version of symbol zt_receive qozap: Unknown symbol zt_receive qozap: disagree...

...r/src called linux-2.6 (ln -s /usr/src/linux- 2.6.13-15 /usr/src/linux-2.6) as per INSTALL doc 5) run the install.sh script in the bristuff director. At this stage during the install script, the quadBRI driver section shows the following: **************************************************** rm -f qozap.o *.ko *.mod.c *.mod.o .*o.cmd *~ rm -rf .tmp_versions make -C /usr/src/linux-2.6 SUBDIRS=/usr/src/bristuff-0.2.0-RC8q/qozap ZAP=-I/usr/src/bristuff-0.2.0-RC8q/zaptel-1.0.10 modules make[1]: Entering directory `/usr/src/linux-2.6.13-15' CC [M] /usr/src/bristuff-0.2.0-RC8q/qozap/qozap.o Bui...

...idea what can be wrong? 1/ We use latest bristuff packages. 2/ We use TE mode 3/ Card is working on older 2.4 system, we use same cables and ISDN devices. 4/ On Dell we have a Centos 4.1 with 2.6.12 kernel. After loading the driver we got CRC errors like this: Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 1 Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 3 Jul 19 17:02:30 ustredna kernel: qozap: CRC...

Hi, (cc. asterisk-users, hope that is not a big Faux Pas) I've had trouble with the qozap driver for a LONG time now, where it will not recognise and ignore a missing ISDN2 line on a quad card if one of the 4 ports is unplugged or somehow faulty. The symptom is that is correctly recognises the fault, but then clears the RED ALARM almost immediately, leaving Asterisk thinking that it ca...

...r (I think that I have wrong setting for P2P or P2MP setting and cables 1 and 2). If I connect phone to ISDN with straight cable it works. I've put quadbri in between, and connected ISDN to span1 in TE mode, and phone in NT mode on span4. Did configuration (added at the end). I get errors: qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 qozap: CRC error for HDLC frame on card 1...

...s QuadBRI to coexist in the same machine as a Digium TDM400P card (so I can run the ISDN lines in and bridge with analog phones plugged into the TDM). I'm having a problem loading the modules. If I follow the BRIstuff (0.3.0-pre-1l) install method.... it's to modprobe zaptel, then insmod qozap.o I'm on Debian 2.4.31. That works. But then I still need the Digium module. (modprobe wctdm) I've tried a few different orders. Sometimes I can get the digium to load, and the qozap. but then I get an error on the ztcfg about Span invalid argument (could be my zaptel.conf I realize...)...

Good day all Is there a fix for these errors yet for the junghanns cards Jul 26 17:15:05 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 1 z2 107 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 5 z1 118 z2 97 Jul 26 17:16:33 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes...

hello, Here (http://updates.xorcom.com/astribank/bristuff/1.4/INSTALL.html) you can read : cd qozap modprobe zaptel insmod qozap.o (for kernel 2.4) insmod qozap.ko (for kernel 2.6) ztcfg I thought modprobe was a replacement for insmod. Can someone be kind enough to explain : 1. the difference between modprobe and insmod, 2. why should both commands be issued, 3. how modprobe and insmod compare w...

...ora core 1 - QuadBRI card bought from junghanns.net - We want to use the card in TE mode to connect to the TELCO - Downloaded BRISTUFF0.0.2(stable) latest from junghanss.net/asterisk - followed the instructions on voip-info.org - compiled everything still got the error when "make load" in qozap : insmod ./qozap.o ./qozap.o: unresolved symbol zt_ec_chunk ./qozap.o: unresolved symbol zt_unregister ./qozap.o: unresolved symbol zt_transmit ./qozap.o: unresolved symbol zt_receive ./qozap.o: unresolved symbol zt_register make: *** [load] Error 1 when i execute ztcfg -v -c /etc/zaptel.conf we...

Hi, In my 1.6.1.18 with dahdi 2.2.1.1, I've got : # dahdi_hardware pci:0000:01:0a.0 qozap- 1397:16b8 Junghanns OctoBRI ISDN card Does it mean I should download and use qozap or is it a bug in Dahdi ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100412/de87e46e/attachment.htm

...ghanns BRI 4 port installed where only the first channel of each line is working i.e. channels 1 and 4 work but 2 and 5 don't. Our config is the same on this box as 15 other similar installations where all works well. the only error I see is in /var/log/messages: Jun 28 15:49:31 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:51:27 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:53:09 pbxct kernel: qozap: CRC error for HDLC frame on card 1 (cardID 0) S/T port 2 Jun 28 15:56:48 pbxct kernel: qozap: CRC error for HD...

Hi all, Using Asterisk 1.0.10-BRIstuffed-0.2.0-RC8q with a Junghanns quadBRI (2 spans connected) and a Digium TDM400 for extensions Shouuld I be worried about these lines that keep showing up in my /var/log/messages? qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116 qozap: dropped audio card 1 cardid 0 bytes 6 z1 50 z2 28 qozap: dropped audio card 1 cardid 0 bytes 6 z1 59 z2 37 .. .... This may or may not be related to a problem I am having with incoming calls. They seem to appear when my incoming calls ke...

Hi, For a significant time now (since about 0.2.0-rc8n) the qozap driver has become very verbose if an ISDN line is not connected... I get the messages below every couple of seconds in the asterisk logs. The "flaw" in the messages is the "Alarm cleared" message - The alarm cannot possibly be cleared because there is no physical media connecte...

Hello I am using a Junghanns QuadBRI ISDN card - the module name is qozap. If I like at my interrupt assignment, qozap is sharing interrupt 10 with libata and uhci_hcd. I think libata is the IDE hard drive module and uhci_hcd is a USB module. linux:~ # modprobe qozap linux:~ # cat /proc/interrupts CPU0 0: 12634579 XT-PIC timer 1: 10...

...a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver: ? >dahdi_hardware -v pci:0000:00:00.0 wcb4xxp+ 1397:08b4 Junghanns QuadBRI ISDN card Instead of: >dahdi_hardware -v pci:0000:00:00.0 qozap- 1397:08b4 Generic Cologne ISDN card There is no qozap modul in lib/modules but I tried to blacklist it anyway. The consequences that the card is not working in the second machine with the same dahdi config/kernel: Sarting background readahead: [ OK ] Checking for hardware changes [ OK...

...thing to do with the channel numbering. I've tried numbering the channels with the E1 first (which produces lots of modprobe errors), and then with the BRI span's first, which produces no modprobe errors, but doesn't work. Here is the latter configuration: ZAPTEL.CONF (excerpt): # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami # E1 definition: span=5,0,0,ccs,hdb3,crc4 #BRI's: bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 #E1:...

...ollowing .... I have 2 quadbri cards 2 - 1t0 cards 1 pabx alcatel 4200 I would like to connect my asterisk to the alcatel , I installed bristuff 0.3.0-1p , loaded the zaphfc driver in NT mode configured zaptel and zapata , it works great. then I removed the 1 t0 card, added the quadbri loaded qozap : insmod qozap.ko ports=15 ( 4 ports in NT ) adjusted the zaptel zapata, specified the right signalling, right context ran ztcfg -vv ( 12 channels configured ) started asterisk, I get layer1 down message on the 4 ports, leds remain red what ever I do in my conf , I am not able to get a reaction fr...

I try to run QuadBRI wih X100P and TDM 4xxP. When I run them separate (ISDN or analog), they work, but together they load with no error messages (when ISDN is loaded first), but phones conected to interfaces are 'dead'. How to solve this? Maciej Kielinski

Hello list, After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently detected as 2 ports instead of 4. I still load the driver as "modprobe qozap ports=12" as I've always done. But now it only sees 2 ports. Output of "lspci -vvv" ------ cut -------- 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem: Cologne Chip Designs GmbH Unknown device b560 Control: I...