asterisk-users-admin@lists.digium.com wrote:> It's running Debian Sarge with the stock 2.4.26 kernel (I > know it's still an "unstable" release, but I'd need to jump > through all sorts of hoops to get Woody working properly).I wouldn't make a fuss about this. sarge is at least as good as woody and much more up to date for the stuff asterisk can do / needs. -- Andreas Sikkema Rits tele.com Scheepmakersstraat 11 3011 VH Rotterdam t: +31 (0)10 2245544 f: +31 (0)10 2245540
----- Original Message ----- From: "Martin List-Petersen" <martin+asterisk@list-petersen.net> To: <asterisk-users@lists.digium.com> Cc: <asterisk@garypigott.net> Sent: Wednesday, August 11, 2004 1:12 PM Subject: Re: [Asterisk-Users] zaphfc problems...> Don't think about that. Sarge is just fine and soon to be released. I've > been using it for a long time on some of the servers now. > > [snip] >> I'm using vanilla bri-stuff-0.1.0-RC2k from www.junghanns.net and >> everything >> looks right. There are no errors or warnings during startup. It seems to >> work correctly (well SIP and IAX2 anyway) until I try to dial out over >> the >> ISDN line. >> I get the following: >> *CLI> -- Executing Dial("SIP/602-9964", "Zap/g1/226581") in new stack >> Aug 11 11:51:08 NOTICE[245775]: app_dial.c:719 dial_exec: Unable to >> create >> channel of type 'Zap' >> == Everyone is busy/congested at this time >> >> There are channels there: >> *CLI> zap show channels >> Chan Extension Context Language MusicOnHold >> pseudo default en default >> 1 default en default >> 2 default en default > > That looks ok. > >> and the zaptel, zaphfc, isdn and hisax modules are loaded correctly in >> the >> kernel. > > Why hisax ? What do you want that for ? What does "ztcfg -vvvv" show ? > >> for anyone who's interested, the config files are at >> http://www.garypigott.net/files/asterisk/extensions.conf >> http://www.garypigott.net/files/asterisk/modules.conf >> http://www.garypigott.net/files/asterisk/zapata.conf >> http://www.garypigott.net/files/asterisk/zaptel.conf > > Those look ok. > > Kind regards, > Martin List-PetersenI stuck in Hisax just in case I needed to use the line for PPP in the future.... It makes no difference when I take it out anyway. See below for the ztcfg output. It looks OK to me. pbx:~# ztcfg -vvvv Zaptel Configuration ===================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. pbx:~# Gary
Yes I'm sure, although just in case, I tried both point to point and point to multipoint modes in zapata.conf Gary ----- Original Message ----- From: "Michael Sandee" <ms@zeelandnet.nl> To: <asterisk-users@lists.digium.com> Sent: Wednesday, August 11, 2004 1:55 PM Subject: Re: [Asterisk-Users] zaphfc problems...> Although I don't think the error message would indicate something like > this... but... are you sure you have a ptp isdn line (bri_cpe versus > bri_cpe_ptmp). > > Gary Pigott wrote: > >> I think I'm going slightly mad..... >> >> I've got a Dell PowerEdge 400SC (Cel 2.4GHz, 256MB RAM, 40GB HDD) that >> I'm using to set up a * PBX for a (very) small startup. >> It's running Debian Sarge with the stock 2.4.26 kernel (I know it's still >> an "unstable" release, but I'd need to jump through all sorts of hoops >> to get Woody working properly). The plan is to use a BRI ISDN for >> inbound, and fallback outbound, and IAX2 for the bulk of outbound calls >> over ADSL (dialing _9X goes over IAX and _8X over ISDN. Nothing more >> complicated than that). I'm using a generic HFC-S card from Billion. >> >> I'm using vanilla bri-stuff-0.1.0-RC2k from www.junghanns.net and >> everything looks right. There are no errors or warnings during startup. >> It seems to work correctly (well SIP and IAX2 anyway) until I try to dial >> out over the ISDN line. >> I get the following: >> *CLI> -- Executing Dial("SIP/602-9964", "Zap/g1/226581") in new stack >> Aug 11 11:51:08 NOTICE[245775]: app_dial.c:719 dial_exec: Unable to >> create channel of type 'Zap' >> == Everyone is busy/congested at this time >> >> There are channels there: >> *CLI> zap show channels >> Chan Extension Context Language MusicOnHold >> pseudo default en default >> 1 default en default >> 2 default en default >> >> and the zaptel, zaphfc, isdn and hisax modules are loaded correctly in >> the kernel. >> >> for anyone who's interested, the config files are at >> http://www.garypigott.net/files/asterisk/extensions.conf >> http://www.garypigott.net/files/asterisk/modules.conf >> http://www.garypigott.net/files/asterisk/zapata.conf >> http://www.garypigott.net/files/asterisk/zaptel.conf >> >> I've looked at the previous thread, started by Wim Venneman in February, >> but it doesn't apply, because I can see channels in asterisk. >> Any help would be greatly appreciated. >> >> Regards, >> >> Gary >> >> Self-referencing >> Five, seven, five syllables >> This haiku contains >> http://garypigott.net >> >> _______________________________________________ >> Asterisk-Users mailing list >> Asterisk-Users@lists.digium.com >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
Hi Scott, I tried making those changes and it didn't make any difference. :o( Gary ----- Original Message ----- From: "Scott Stingel" <scott@evtmedia.com> To: <asterisk-users@lists.digium.com> Sent: Wednesday, August 11, 2004 5:39 PM Subject: RE: [Asterisk-Users] zaphfc problems...> > Have you tried changing pridialplan and prilocaldialplan to "unknown" and > supplying the full national number (no country code). That worked for me > in > the UK. > > I didn't follow this thread fully, so apologies if someone else already > answered this. > > Turn on BRI debugging too to find out what's happening. > > Regards > > > Scott M. Stingel
Apologies for a stupid question, but how do I turn on BRI debugging? Gary ----- Original Message ----- From: "Scott Stingel" <scott@evtmedia.com> To: <asterisk-users@lists.digium.com> Sent: Thursday, August 12, 2004 11:03 AM Subject: RE: [Asterisk-Users] zaphfc problems...> Gary- > > Try turning on BRI debugging (not intense), and post it. (just the part > with errors that you get during the connection). Maybe you'll see an > error > relating to the numbering plan or something similar. > > Regards > Scott > > Scott M. Stingel > President, > Emerging Voice Technology, Inc. > Palo Alto California & London England > www.evtmedia.com > > -----Original Message----- > From: asterisk-users-admin@lists.digium.com > [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Gary Pigott > Sent: Thursday, August 12, 2004 2:13 AM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] zaphfc problems... > > Hi Scott, > > I tried making those changes and it didn't make any difference. :o( > > Gary > ----- Original Message ----- > From: "Scott Stingel" <scott@evtmedia.com> > To: <asterisk-users@lists.digium.com> > Sent: Wednesday, August 11, 2004 5:39 PM > Subject: RE: [Asterisk-Users] zaphfc problems... >> >> Have you tried changing pridialplan and prilocaldialplan to "unknown" >> and supplying the full national number (no country code). That worked >> for me in the UK. >> >> I didn't follow this thread fully, so apologies if someone else >> already answered this. >> >> Turn on BRI debugging too to find out what's happening. >> >> Regards >> >> >> Scott M. Stingel > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >