Hello,
I am having problems configuring a TDM400P 4 Port FXO card with
groundstart signalling. The box has 2 X100P's, 1 TDM04B and 1 TDM40B. I
can configure it for loopstart and it works, just not groundstart, which I
need for this installation. What am I missing?
Thanks!
Mark
/etc/zaptel.conf
#two X100P FXO Cards
#
fxsls=1-2
# TDM400P 4 Port FXO (TDM04B)
fxsgs=3-6
# TDM400P 4 Port FXS (TDM40B)
fxoks=7-10
[root@pbx etc]# ztcfg -vvv
Zaptel Configuration
=====================
Channel map:
Channel 01: FXS Loopstart (Default) (Slaves: 01)
Channel 02: FXS Loopstart (Default) (Slaves: 02)
Channel 03: FXS Groundstart (Default) (Slaves: 03)
Channel 04: FXS Groundstart (Default) (Slaves: 04)
Channel 05: FXS Groundstart (Default) (Slaves: 05)
Channel 06: FXS Groundstart (Default) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Slaves: 08)
Channel 09: FXO Kewlstart (Default) (Slaves: 09)
Channel 10: FXO Kewlstart (Default) (Slaves: 10)
10 channels configured.
ZT_CHANCONFIG failed on channel 3: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?
[root@pbx etc]#
