search for: fxsgs

...ewlstart signalling Jan 13 11:18:41 ERROR[4610] chan_zap.c: Unable to register channel '1-23' Jan 13 11:18:41 WARNING[4610] loader.c: chan_zap.so: load_module failed, returning -1 Jan 13 11:18:41 WARNING[4610] loader.c: Loading module chan_zap.so failed! Is there a setting other than fxsks,fxsgs,fxsls that I should use for these lines? (i.e. something like fxsem?) Thanks in advance

Does anyone know which signalling protocol works when connecting the output of a NT8B90AL Norstar ATA2 analog terminal adapter to an FXO card? (fxsks, fxsgs, fxsls?) I'm trying to add an Asterisk branch to my Norstar PBX as outlined at http://www.voip-info.org/wiki-Asterisk+Nortel. - Mike

...change the zaptel.conf and zapata.conf to use this type of signaling but ztcfg gives me an error every time with the new configuration. Bellow are the config files and the actual error. Again, everything works fine with the default signaling (fxsks) zaptel.conf --- loadzone = us defaultzone = us fxsgs=1-2 zapata.conf --- [channels] callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 immediate=no context=default signalling=fxs_gs channel=1-2 and the error I am getting is: -- [root@voip r...

...Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different signaling options, I am left wondering what is the advantage of one over the other. Obviously fxsks has remote disconnect support, however if I were to go with gs or ls, what functionality would I really lose by not having it? How does...

...100P, and when I have asterisk "pick it up" I hear a faint busy signal. I tried Loop Start with the same result, but I'm kind of thrashing as far as how the files /etc/zaptel.conf and /etc/asterisk/zapata.conf have to synch. When I tried to use Ground Start (set zaptel.conf "fxsgs") I get an error from ztcfg. Is there some glaring thing I am doing wrong? Thanks. B.

...groundstart signalling. The box has 2 X100P's, 1 TDM04B and 1 TDM40B. I can configure it for loopstart and it works, just not groundstart, which I need for this installation. What am I missing? Thanks! Mark /etc/zaptel.conf #two X100P FXO Cards # fxsls=1-2 # TDM400P 4 Port FXO (TDM04B) fxsgs=3-6 # TDM400P 4 Port FXS (TDM40B) fxoks=7-10 [root@pbx etc]# ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Loopstart (Default) (Slaves: 01) Channel 02: FXS Loopstart (Default) (Slaves: 02) Channel 03: FXS Groundstart (Default) (Slaves: 03) Channel 04: FXS...

...start on Asterisk? I am using a TE110P connected a Adtran 750 channel bank FXO card. It appears that Asterisk is not setting the CAS RBS bits properly to seize the line. I can see this with the zttool and the Adtran admin serial port status. I have configured the zaptel.conf and Zapata.conf to use fxsgs on those channels. Syed Akbar Alico Systems Inc www.alicosystems.com Tel: 562-436-1510

...01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? i was not able to make it work, trying other setups (fxsls, fxsgs, even fxo... ) please help me sort it out or point out what i'm doing wrong :( thanks, Marek ------------------------------------------------- here is output from kernel/dmesg: Aug 24 16:11:13 arnor kernel: Zapata Telephony Interface Registered on major 196 Aug 24 16:13:32 arnor kernel: A...

.... Tests: fxsks on the zapata.conf and zaptel.conf files. From my cellphone I call the ARRIS, it starts ringing but the zap channel sees no call coming in. fxsls on the zapata.conf and zaptel.conf files. From my cellphone I call the ARRIS, it starts ringing, zap channel picks up the call. all good. fxsgs on the zapata.conf and zaptel.conf files. ztcfg reports error about invalid mode. Well, I used loopstart as the signal, however when using it I face one very nasty issue. My asterisk/zap channel does not detect hangups correctly. I have enabled busydetect but it's kind of unreliable. Specially...

..."e&m" : Channel(s) are signalled using E&M signalling (specific # implementation, such as Immediate, Wink, or Feature Group D # are handled by the userspace library). # "fxsls" : Channel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart pro...

Hello - I have a non-PRI T1 setup and have been making outgoing calls for several months no problem. I have Zapata.conf setup for fxs_ks on these channels. How do I take incoming calls on these same channels? Do I need to change the signaling? Any help is appreciated. Thank you, Dave -------------- next part -------------- An HTML attachment was scrubbed... URL:

...t;e&m" : Channel(s) are signalled using E&M signalling (specific # implementation, such as Immediate, Wink, or Feature Group D # are handled by the userspace library). # "fxsls" : Channel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart...

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

..."e&m" : Channel(s) are signalled using E&M signalling (specific # implementation, such as Immediate, Wink, or Feature Group D # are handled by the userspace library). # "fxsls" : Channel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart pro...

...t;e&m" : Channel(s) are signalled using E&M signalling (specific # implementation, such as Immediate, Wink, or Feature Group D # are handled by the userspace library). # "fxsls" : Channel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart...

..."e&m" : Channel(s) are signalled using E&M signalling (specific # implementation, such as Immediate, Wink, or Feature Group D # are handled by the userspace library). # "fxsls" : Channel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart pro...

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf

..."e&m" : Channel(s) are signalled using E&M signalling (specific # implementation, such as Immediate, Wink, or Feature Group D # are handled by the userspace library). # "fxsls" : Channel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart pro...

Hi, I am having some issues with a new server install in Singapore. Outbound calls work fine. Inbound calls are not picked up by Asterisk. Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. libpri installed wctdm and zaptel load without error Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface Registered on major 196 Jun 6 23:34:03 fs01 kernel: [211138.372937]