To the guy who wanted to know if the Tiger 560 card was a X100P - I don't
think so.
Here's the lspci -vv from a fairly new X100P:
00:09.0 Communication controller: Tiger Jet Network Inc. Model 300 128k
Subsystem: Unknown device 8085:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 7000 [size=256]
Region 1: Memory at e4001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Hope this helps.
PS It's interesting to see the difference between this and an older X100P:
00:0a.0 Communication controller: Motorola: Unknown device 5608
Subsystem: Motorola: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at e8002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Motorola is 1057 so the PCI ID is 1057:5608 for the older card, and 8085:0003
for the newer card.
--
Jim Ockers (ockers at ockers.net)
Contact info: please see http://www.ockers.net/
Fight Spam! Join CAUCE (Coalition Against Unsolicited Commercial Email)
at http://www.cauce.org/ .
