thr3ads.net - llvm dev - [LLVMdev] Register scavenger and SP/FP adjustments [Sep 2013]

If this information is useful, please help other people find it:
Share via:

Krzysztof Parzyszek

2013-Sep-25 15:57 UTC

[LLVMdev] Register scavenger and SP/FP adjustments

Hi All,
I'm dealing with a problem where the spill/restore instructions inserted 
during scavenging span an adjustment of the SP/FP register.  The result 
is that despite the base register (SP/FP) being changed between the 
spill and the restore, both store and load use the same immediate offset.

I see code in the PEI (replaceFrameIndices) that is supposed to track 
the SP/FP adjustment:

----------------------------------------
void PEI::replaceFrameIndices(MachineBasicBlock *BB,
                               MachineFunction &Fn, int &SPAdj) {
   const TargetMachine &TM = Fn.getTarget();
   assert(TM.getRegisterInfo() &&
          "TM::getRegisterInfo() must be implemented!");
   const TargetInstrInfo &TII = *Fn.getTarget().getInstrInfo();
   const TargetRegisterInfo &TRI = *TM.getRegisterInfo();
   const TargetFrameLowering *TFI = TM.getFrameLowering();
   bool StackGrowsDown      TFI->getStackGrowthDirection() =                
TargetFrameLowering::StackGrowsDown;
   int FrameSetupOpcode   = TII.getCallFrameSetupOpcode();
   int FrameDestroyOpcode = TII.getCallFrameDestroyOpcode();

   if (RS && !FrameIndexVirtualScavenging) RS->enterBasicBlock(BB);

   for (MachineBasicBlock::iterator I = BB->begin(); I != BB->end(); ) {

     if (I->getOpcode() == FrameSetupOpcode ||
         I->getOpcode() == FrameDestroyOpcode) {
       // Remember how much SP has been adjusted to create the call
       // frame.
       int Size = I->getOperand(0).getImm();

       if ((!StackGrowsDown && I->getOpcode() == FrameSetupOpcode) ||
           (StackGrowsDown && I->getOpcode() == FrameDestroyOpcode))
         Size = -Size;

       SPAdj += Size;

   [...]
----------------------------------------


The problem is that it expects frame-setup and frame-destroy opcodes, 
but at the time it runs (after emitPrologue/emitEpilogue) the frame 
setup and teardown will be expanded into instruction sequences that can 
be different for each target, let alone having the immediate value in 
the 0-th operand.

As I see, this code won't work, although I'm not sure what was the 
original idea behind it.  Should this code run before the target 
specific generation of prolog/epilog?  Even then, there won't need to be 
ADJCALLSTACKUP/DOWN instructions (if it's a leaf function).  If it runs 
where it should, should it instead use some target-specific hook that 
identifies the actual stack adjustment amount?

-Krzysztof


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
hosted by The Linux Foundation

Evan Cheng

2013-Sep-26 18:24 UTC

head link

[LLVMdev] Register scavenger and SP/FP adjustments

CallFrameSetupOpcode is a pseudo opcode like X86::ADJCALLSTACKDOWN64. That means
when the code is expected to be called before the pseudo instructions are
eliminated. I don't know why it's not the case for you. A quick look at
PEI code indicates the pseudo's should not have been removed at the time
when replaceFrameIndices are run.

Evan


On Sep 25, 2013, at 8:57 AM, Krzysztof Parzyszek <kparzysz at
codeaurora.org> wrote:
> Hi All,
> I'm dealing with a problem where the spill/restore instructions
inserted during scavenging span an adjustment of the SP/FP register.  The result
is that despite the base register (SP/FP) being changed between the spill and
the restore, both store and load use the same immediate offset.
> 
> I see code in the PEI (replaceFrameIndices) that is supposed to track the
SP/FP adjustment:
> 
> ----------------------------------------
> void PEI::replaceFrameIndices(MachineBasicBlock *BB,
>                              MachineFunction &Fn, int &SPAdj) {
>  const TargetMachine &TM = Fn.getTarget();
>  assert(TM.getRegisterInfo() &&
>         "TM::getRegisterInfo() must be implemented!");
>  const TargetInstrInfo &TII = *Fn.getTarget().getInstrInfo();
>  const TargetRegisterInfo &TRI = *TM.getRegisterInfo();
>  const TargetFrameLowering *TFI = TM.getFrameLowering();
>  bool StackGrowsDown >    TFI->getStackGrowthDirection() =>       
TargetFrameLowering::StackGrowsDown;
>  int FrameSetupOpcode   = TII.getCallFrameSetupOpcode();
>  int FrameDestroyOpcode = TII.getCallFrameDestroyOpcode();
> 
>  if (RS && !FrameIndexVirtualScavenging)
RS->enterBasicBlock(BB);
> 
>  for (MachineBasicBlock::iterator I = BB->begin(); I != BB->end(); )
{
> 
>    if (I->getOpcode() == FrameSetupOpcode ||
>        I->getOpcode() == FrameDestroyOpcode) {
>      // Remember how much SP has been adjusted to create the call
>      // frame.
>      int Size = I->getOperand(0).getImm();
> 
>      if ((!StackGrowsDown && I->getOpcode() == FrameSetupOpcode)
||
>          (StackGrowsDown && I->getOpcode() ==
FrameDestroyOpcode))
>        Size = -Size;
> 
>      SPAdj += Size;
> 
>  [...]
> ----------------------------------------
> 
> 
> The problem is that it expects frame-setup and frame-destroy opcodes, but
at the time it runs (after emitPrologue/emitEpilogue) the frame setup and
teardown will be expanded into instruction sequences that can be different for
each target, let alone having the immediate value in the 0-th operand.
> 
> As I see, this code won't work, although I'm not sure what was the
original idea behind it.  Should this code run before the target specific
generation of prolog/epilog?  Even then, there won't need to be
ADJCALLSTACKUP/DOWN instructions (if it's a leaf function).  If it runs
where it should, should it instead use some target-specific hook that identifies
the actual stack adjustment amount?
> 
> -Krzysztof
> 
> 
> -- 
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted
by The Linux Foundation
> _______________________________________________
> LLVM Developers mailing list
> LLVMdev at cs.uiuc.edu         http://llvm.cs.uiuc.edu
> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20130926/f44fe118/attachment.html>

Krzysztof Parzyszek

2013-Sep-26 19:00 UTC

head link

[LLVMdev] Register scavenger and SP/FP adjustments

Consider this example:

--- ex.ll ---
declare void @bar()

; Function Attrs: nounwind optsize
define void @main() {
entry:
   %hin = alloca [256 x i32], align 4
   %xin = alloca [256 x i32], align 4
   call void @bar()
   ret void
}
-------------


Freshly built llc:

llc -O2 -march=x86 < ex.ll -print-before-all

# *** IR Dump Before Prologue/Epilogue Insertion & Frame Finalization ***:
# Machine code for function main: Post SSA
Frame Objects:
   fi#0: size=1024, align=4, at location [SP+4]
   fi#1: size=1024, align=4, at location [SP+4]

BB#0: derived from LLVM BB %entry
         ADJCALLSTACKDOWN32 0, %ESP<imp-def>, %EFLAGS<imp-def,dead>,
%ESP<imp-use>
         CALLpcrel32 <ga:@bar>, <regmask>, %ESP<imp-use>,
%ESP<imp-def>
         ADJCALLSTACKUP32 0, 0, %ESP<imp-def>,
%EFLAGS<imp-def,dead>,
%ESP<imp-use>
         RET

# End machine code for function main.

before replace frame indices
# Machine code for function main: Post SSA
Frame Objects:
   fi#0: size=1024, align=4, at location [SP-1024]
   fi#1: size=1024, align=4, at location [SP-2048]

BB#0: derived from LLVM BB %entry
         %ESP<def,tied1> = SUB32ri %ESP<tied0>, 2060, 
%EFLAGS<imp-def,dead>; flags: FrameSetup
         PROLOG_LABEL <MCSym=.Ltmp0>
         CALLpcrel32 <ga:@bar>, <regmask>, %ESP<imp-use>,
%ESP<imp-def>
         %ESP<def,tied1> = ADD32ri %ESP<tied0>, 2060,
%EFLAGS<imp-def,dead>
         RET

# End machine code for function main.



Let's see what happens if we remove the call to "bar".

There aren't any pseudocodes that set up the frame to begin with, even 
though the SP is actually modified.  (This is to show that RS has no way 
of finding out that SP was actually adjusted in such cases.)


# *** IR Dump Before Prologue/Epilogue Insertion & Frame Finalization ***:
# Machine code for function main: Post SSA
Frame Objects:
   fi#0: size=1024, align=4, at location [SP+4]
   fi#1: size=1024, align=4, at location [SP+4]

BB#0: derived from LLVM BB %entry
         RET

# End machine code for function main.

before replace frame indices
# Machine code for function main: Post SSA
Frame Objects:
   fi#0: size=1024, align=4, at location [SP-1024]
   fi#1: size=1024, align=4, at location [SP-2048]

BB#0: derived from LLVM BB %entry
         %ESP<def,tied1> = SUB32ri %ESP<tied0>, 2048, 
%EFLAGS<imp-def,dead>; flags: FrameSetup
         PROLOG_LABEL <MCSym=.Ltmp0>
         %ESP<def,tied1> = ADD32ri %ESP<tied0>, 2048,
%EFLAGS<imp-def,dead>
         RET

# End machine code for function main.



And here's where the problem becomes more apparent.

Compile for Thumb and see that there is a virtual register used in the 
frame setup:

# *** IR Dump Before Prologue/Epilogue Insertion & Frame Finalization ***:
# Machine code for function main: Post SSA
Frame Objects:
   fi#0: size=1024, align=4, at location [SP]
   fi#1: size=1024, align=4, at location [SP]

BB#0: derived from LLVM BB %entry
         tBX_RET pred:14, pred:%noreg

# End machine code for function main.

before replace frame indices
# Machine code for function main: Post SSA
Frame Objects:
   fi#0: size=1024, align=4, at location [SP-1032]
   fi#1: size=1024, align=4, at location [SP-2056]
   fi#2: size=4, align=4, at location [SP-4]
   fi#3: size=4, align=4, at location [SP-8]
Constant Pool:
   cp#0: -2048, align=4
   cp#1: 2048, align=4

BB#0: derived from LLVM BB %entry
     Live Ins: %R4 %LR
         tPUSH pred:14, pred:%noreg, %R4<kill>, %LR<kill>,
%SP<imp-def>,
%SP<imp-use>; flags: FrameSetup
         %vreg0<def> = tLDRpci <cp#0>, pred:14, pred:%noreg; flags: 
FrameSetup tGPR:%vreg0
         %SP<def,tied1> = tADDhirr %SP<tied0>, %vreg0<kill>,
pred:14,
pred:%noreg; tGPR:%vreg0
         %vreg1<def> = tLDRpci <cp#1>, pred:14, pred:%noreg;
tGPR:%vreg1
         %SP<def,tied1> = tADDhirr %SP<tied0>, %vreg1<kill>,
pred:14,
pred:%noreg; tGPR:%vreg1
         tPOP_RET pred:14, pred:%noreg, %R4<def>, %PC<def>, 
%SP<imp-def>, %SP<imp-use>

# End machine code for function main.


On Thumb you can save/restore a register without having to use a spill 
slot, so the scavenger won't run into problems, but if a target had to 
spill, we would end up with a register save before the SP update, and 
restore after the SP update, and the RS would use the same offset in 
both instructions.
I don't have a working testcase (i.e. one that demonstrates the failure) 
that I can post, but if I cheat the RS into believing that it has to 
spill, the problem will happen.

Here's a sample result of this.  Don't mind the FixedStack-1, I 
explicitly used a base offset of 0 in the code, and this was to 
illustrate the lack of adjustment in RS:

         tSTRspi %R1<kill>, %SP, 0, pred:14, pred:%noreg; 
mem:ST4[FixedStack-1]    <- spill to *(SP+0)
         %R1<def> = tLDRpci <cp#1>, pred:14, pred:%noreg
         %SP<def,tied1> = tADDhirr %SP<tied0>, %R1<kill>,
pred:14,
pred:%noreg     <- SP = something different
         %R3<def> = tLDRspi %SP, 0, pred:14, pred:%noreg; 
mem:LD4[FixedStack-1]
         %R1<def> = tLDRspi %SP, 0, pred:14, pred:%noreg; 
mem:LD4[FixedStack-1]    <- restore from *(NewSP+0)   !!


-Krzysztof



On 9/26/2013 1:24 PM, Evan Cheng wrote:> CallFrameSetupOpcode is a pseudo opcode like X86::ADJCALLSTACKDOWN64.
> That means when the code is expected to be called before the pseudo
> instructions are eliminated. I don't know why it's not the case for
you.
> A quick look at PEI code indicates the pseudo's should not have been
> removed at the time when replaceFrameIndices are run.
>
> Evan
>
>
> On Sep 25, 2013, at 8:57 AM, Krzysztof Parzyszek
> <kparzysz at codeaurora.org <mailto:kparzysz at
codeaurora.org>> wrote:
>
>> Hi All,
>> I'm dealing with a problem where the spill/restore instructions
>> inserted during scavenging span an adjustment of the SP/FP register.
>>  The result is that despite the base register (SP/FP) being changed
>> between the spill and the restore, both store and load use the same
>> immediate offset.
>>
>> I see code in the PEI (replaceFrameIndices) that is supposed to track
>> the SP/FP adjustment:
>>
>> ----------------------------------------
>> void PEI::replaceFrameIndices(MachineBasicBlock *BB,
>>                              MachineFunction &Fn, int &SPAdj) {
>>  const TargetMachine &TM = Fn.getTarget();
>>  assert(TM.getRegisterInfo() &&
>>         "TM::getRegisterInfo() must be implemented!");
>>  const TargetInstrInfo &TII = *Fn.getTarget().getInstrInfo();
>>  const TargetRegisterInfo &TRI = *TM.getRegisterInfo();
>>  const TargetFrameLowering *TFI = TM.getFrameLowering();
>>  bool StackGrowsDown >>    TFI->getStackGrowthDirection()
=>>                TargetFrameLowering::StackGrowsDown;
>>  int FrameSetupOpcode   = TII.getCallFrameSetupOpcode();
>>  int FrameDestroyOpcode = TII.getCallFrameDestroyOpcode();
>>
>>  if (RS && !FrameIndexVirtualScavenging)
RS->enterBasicBlock(BB);
>>
>>  for (MachineBasicBlock::iterator I = BB->begin(); I !=
BB->end(); ) {
>>
>>    if (I->getOpcode() == FrameSetupOpcode ||
>>        I->getOpcode() == FrameDestroyOpcode) {
>>      // Remember how much SP has been adjusted to create the call
>>      // frame.
>>      int Size = I->getOperand(0).getImm();
>>
>>      if ((!StackGrowsDown && I->getOpcode() ==
FrameSetupOpcode) ||
>>          (StackGrowsDown && I->getOpcode() ==
FrameDestroyOpcode))
>>        Size = -Size;
>>
>>      SPAdj += Size;
>>
>>  [...]
>> ----------------------------------------
>>
>>
>> The problem is that it expects frame-setup and frame-destroy opcodes,
>> but at the time it runs (after emitPrologue/emitEpilogue) the frame
>> setup and teardown will be expanded into instruction sequences that
>> can be different for each target, let alone having the immediate value
>> in the 0-th operand.
>>
>> As I see, this code won't work, although I'm not sure what was
the
>> original idea behind it.  Should this code run before the target
>> specific generation of prolog/epilog?  Even then, there won't need
to
>> be ADJCALLSTACKUP/DOWN instructions (if it's a leaf function).  If
it
>> runs where it should, should it instead use some target-specific hook
>> that identifies the actual stack adjustment amount?
>>
>> -Krzysztof
>>
>>
>> --
>> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
>> hosted by The Linux Foundation
>> _______________________________________________
>> LLVM Developers mailing list
>> LLVMdev at cs.uiuc.edu
>> <mailto:LLVMdev at cs.uiuc.edu>http://llvm.cs.uiuc.edu
>> <http://llvm.cs.uiuc.edu/>
>> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
hosted by The Linux Foundation

Reasonably Related Threads

Search for more reasonably related threads

llvm dev - Sep 2013 - [LLVMdev] Register scavenger and SP/FP adjustments

[LLVMdev] Register scavenger and SP/FP adjustments

[LLVMdev] Register scavenger and SP/FP adjustments

[LLVMdev] Register scavenger and SP/FP adjustments

Reasonably Related Threads