Hopefully someone can point me in the correct direction. I had a 1.4x system die on me yesterday, while I was prepping a new machine to replace it. Took the machine on site yesterday and spent the day and part of the evening getting things working. This morning, I finished up converting my dial plan, knowing there'd be calls of things that I missed. While testing, I've noted that all inbound and outbound calls over the PRI give no ring indications. This is my second converted system and the first system doesn't have this issue. The system is out of the Detroit, MI area and the provider is TDS. One thing of note: I originally started off with 11.12.0, but was having problems with paging and the sound card, so I back dated to 11.9.0 (Same as my first convert) after I deleted the /var/lib/asterisk/modules folder. Machine setup below: lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.6 (wheezy) Release: 7.6 Codename: wheezy uname -a Linux livasterisk 3.9.11-custom-3.9.11 #1 SMP Thu Jan 9 12:18:01 EST 2014 x86_64 GNU/Linux dahdi config: cat system.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us echocanceller=oslec,1-23 span=2,0,0,esf,b8zs fxsks=25-32 fxoks=33-48 defaultzone=us loadzone=us chan_dahdi: [channels] ; ; switchtype=national context=pri signalling=pri_cpe echocancel=yes echotraining = yes ;echocancelwhenbridged = yes pridialplan=unknown group=1 rxgain=-1.0 txgain=-4.0 usecallerid=yes callerid=asreceived channel=1-23 Any suggestions would be appreciated! Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."
Noah Engelberth
2014-Sep-18 14:29 UTC
[asterisk-users] Asterisk 11.9.0 PRI no ring indications
Have you checked your /etc/asterisk/indications.conf file? I know I had a couple systems where I tried to be minimalist with the config files I used, and forgot to bring the indications.conf over from the samples -- the symptom those times was that the caller (inbound, outbound, or extension to extension) wouldn't hear any ringing tone while the call was ringing at the other end. At the CLI, you can use "indication show" to list all loaded indication types, and "indication show <zone>" to see the details about a specific one. I can't remember/find the way to display in CLI what the currently loaded default indication zone is, though there should be a line in the indications.conf file at a minimum. Thank you, Noah Engelberth System Administration MetaLINK Technologies nengelberth at team-meta.net 419-990-0342> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of Doug Lytle > Sent: Thursday, September 18, 2014 9:34 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Asterisk 11.9.0 PRI no ring indications > > Hopefully someone can point me in the correct direction. > > I had a 1.4x system die on me yesterday, while I was prepping a new machine > to replace it. Took the machine on site yesterday and spent the day and part > of the evening getting things working. > > This morning, I finished up converting my dial plan, knowing there'd be calls > of things that I missed. > > While testing, I've noted that all inbound and outbound calls over the PRI > give no ring indications. This is my second converted system and the first > system doesn't have this issue. The system is out of the Detroit, MI area and > the provider is TDS. > > One thing of note: I originally started off with 11.12.0, but was having > problems with paging and the sound card, so I back dated to 11.9.0 (Same as > my first convert) after I deleted the /var/lib/asterisk/modules folder. > > Machine setup below: > > lsb_release -a > No LSB modules are available. > Distributor ID: Debian > Description: Debian GNU/Linux 7.6 (wheezy) > Release: 7.6 > Codename: wheezy > > uname -a > > Linux livasterisk 3.9.11-custom-3.9.11 #1 SMP Thu Jan 9 12:18:01 EST 2014 > x86_64 GNU/Linux > > dahdi config: > > cat system.conf > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > defaultzone=us > loadzone=us > echocanceller=oslec,1-23 > > span=2,0,0,esf,b8zs > fxsks=25-32 > fxoks=33-48 > defaultzone=us > loadzone=us > > chan_dahdi: > > [channels] > ; > ; > > switchtype=national > context=pri > signalling=pri_cpe > echocancel=yes > echotraining = yes > ;echocancelwhenbridged = yes > pridialplan=unknown > group=1 > rxgain=-1.0 > txgain=-4.0 > usecallerid=yes > callerid=asreceived > channel=1-23 > > Any suggestions would be appreciated! > > Doug > > -- > Ben Franklin quote: > > "Those who would give up Essential Liberty to purchase a little Temporary > Safety, deserve neither Liberty nor Safety." > > -- > __________________________________________________________ > ___________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New > to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users