Hello,
i have succesfullu setup asterisk with Sangoma E1 card, evrything works well
but i don't know how to pass indications from telco switch to the user -
when
users call bad number telco switch shuld talk "unallocated number" but
its only
send PRI_CAUSE 1. How to pass voice indications thru asterisk to clients?
My /etc/zaptel.conf:
span=1,0,0,CCS,HDB3,CRC4
dchan=16
bchan=1-10
alaw=1-10
loadzone=pl
defaultzone=pl
My /etc/asterisk/zapata.conf:
[channels]
language=en
context=from-pstn
switchtype=euroisdn
signalling=pri_cpe
pridialplan=local
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=no
cancallforward=no
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
priindication=outofband
group = 1
channel => 1-10
Regards,
Adam Rybak
I need to replace my switch. Does anyone have any recommendations for a switch that is VoIP friendly? I want it to be a managed gigabyte switch. There are lots of brands out there, but would prefer some recommendations from the list. -Charles
On 12/5/05, calvis <calvis@itechgroup.com> wrote:> > I need to replace my switch. Does anyone have any recommendations for a > switch that is VoIP friendly? I want it to be a managed gigabyte switch. > There are lots of brands out there, but would prefer some recommendations > from the list.We use the Fastiron workgroup swiches and really like them. Very solid but a tad expensive. Chris
Hi.
I think it is something to do with your priindication= setting.
I may be wrong, but if I was you I would try priindication=inband
Cheers,
Mark
-----Original Message-----
From: Adam Rybak [mailto:arybak@radiowy.net]
Sent: Tuesday, 6 December 2005 9:01 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] PRI indications.
Hello,
i have succesfullu setup asterisk with Sangoma E1 card, evrything works
well
but i don't know how to pass indications from telco switch to the user -
when
users call bad number telco switch shuld talk "unallocated number" but
its
only
send PRI_CAUSE 1. How to pass voice indications thru asterisk to clients?
My /etc/zaptel.conf:
span=1,0,0,CCS,HDB3,CRC4
dchan=16
bchan=1-10
alaw=1-10
loadzone=pl
defaultzone=pl
My /etc/asterisk/zapata.conf:
[channels]
language=en
context=from-pstn
switchtype=euroisdn
signalling=pri_cpe
pridialplan=local
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=no
cancallforward=no
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
priindication=outofband
group = 1
channel => 1-10
Regards,
Adam Rybak
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users