thr3ads.net - asterisk users - [asterisk-users] Problem with TE212P [Feb 2007]

If this information is useful, please help other people find it:
Share via:

Benito Camelas

2007-Feb-28 03:22 UTC

[asterisk-users] Problem with TE212P

Hello.

I have a TE212 configured in E1 mode.

This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured):

cat /proc/zaptel/2
Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN

          25 TE2/0/1/1 Clear
          26 TE2/0/1/2 Clear
          27 TE2/0/1/3 Clear
          28 TE2/0/1/4 Clear
          29 TE2/0/1/5 Clear
          30 TE2/0/1/6 Clear
          31 TE2/0/1/7 Clear
          32 TE2/0/1/8 Clear
          33 TE2/0/1/9 Clear
          34 TE2/0/1/10 Clear
          35 TE2/0/1/11 Clear
          36 TE2/0/1/12 Clear
          37 TE2/0/1/13 Clear
          38 TE2/0/1/14 Clear
          39 TE2/0/1/15 Clear
          40 TE2/0/1/16 HDLCFCS
          41 TE2/0/1/17 Clear
          42 TE2/0/1/18 Clear
          43 TE2/0/1/19 Clear
          44 TE2/0/1/20 Clear
          45 TE2/0/1/21 Clear
          46 TE2/0/1/22 Clear
          47 TE2/0/1/23 Clear
          48 TE2/0/1/24 Clear
          49 TE2/0/1/25 Clear
          50 TE2/0/1/26 Clear
          51 TE2/0/1/27 Clear
          52 TE2/0/1/28 Clear
          53 TE2/0/1/29 Clear
          54 TE2/0/1/30 Clear
          55 TE2/0/1/31 Clear

cat /proc/zaptel/3
Span 3: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"

          56 TE2/0/2/1 Clear
          57 TE2/0/2/2 Clear
          58 TE2/0/2/3 Clear
          59 TE2/0/2/4 Clear
          60 TE2/0/2/5 Clear
          61 TE2/0/2/6 Clear
          62 TE2/0/2/7 Clear
          63 TE2/0/2/8 Clear
          64 TE2/0/2/9 Clear
          65 TE2/0/2/10 Clear
          66 TE2/0/2/11 Clear
          67 TE2/0/2/12 Clear
          68 TE2/0/2/13 Clear
          69 TE2/0/2/14 Clear
          70 TE2/0/2/15 Clear
          71 TE2/0/2/16 HDLCFCS
          72 TE2/0/2/17 Clear
          73 TE2/0/2/18 Clear
          74 TE2/0/2/19 Clear
          75 TE2/0/2/20 Clear
          76 TE2/0/2/21 Clear
          77 TE2/0/2/22 Clear
          78 TE2/0/2/23 Clear
          79 TE2/0/2/24 Clear
          80 TE2/0/2/25 Clear
          81 TE2/0/2/26 Clear
          82 TE2/0/2/27 Clear
          83 TE2/0/2/28 Clear
          84 TE2/0/2/29 Clear
          85 TE2/0/2/30 Clear
          86 TE2/0/2/31 Clear

Before I do load the modules the leds are ligthing.
But after a ztcfg -v the led of the second span is off.

First I do  insmod wct4xxp and after ztcfg -vv.
The zaptel.conf file is like this:
#
#zaptel.conf
#

fxsks=1-24

span=1,0,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4

bchan=25-39,41-55
dchan=40

bchan=56-70,72-86
dchan=71

loadzone=nl
defaultzone=nl

(I have an TDM24P too, it works ok).

In this moment the led of the first span of the TE212P is in RED (if
no cable connected) or in GREEN (if a cable is conected), but the led
of the second span is off.

This is shown in a pri show span in the CLI (with no cable connected):

pri show span 2
 Primary D-channel: 40
Status: Provisioned, In Alarm, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

*CLI> pri show span 3
Primary D-channel: 71
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

If anybody knows what'? the problem I'll be very pleasent for your help.

Best Regards,

Benito

Benito Camelas

2007-Mar-01 10:15 UTC

head link

[asterisk-users] Fwd: Problem with TE212P

---------- Forwarded message ----------
From: Benito Camelas <benitocamelasbolas@gmail.com>
Date: Wed, 28 Feb 2007 11:21:52 +0100
Subject: Problem with TE212P
To: asterisk-users@lists.digium.com

Hello.

I have a TE212 configured in E1 mode.

This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured):

cat /proc/zaptel/2
Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN

          25 TE2/0/1/1 Clear
          26 TE2/0/1/2 Clear
          27 TE2/0/1/3 Clear
          28 TE2/0/1/4 Clear
          29 TE2/0/1/5 Clear
          30 TE2/0/1/6 Clear
          31 TE2/0/1/7 Clear
          32 TE2/0/1/8 Clear
          33 TE2/0/1/9 Clear
          34 TE2/0/1/10 Clear
          35 TE2/0/1/11 Clear
          36 TE2/0/1/12 Clear
          37 TE2/0/1/13 Clear
          38 TE2/0/1/14 Clear
          39 TE2/0/1/15 Clear
          40 TE2/0/1/16 HDLCFCS
          41 TE2/0/1/17 Clear
          42 TE2/0/1/18 Clear
          43 TE2/0/1/19 Clear
          44 TE2/0/1/20 Clear
          45 TE2/0/1/21 Clear
          46 TE2/0/1/22 Clear
          47 TE2/0/1/23 Clear
          48 TE2/0/1/24 Clear
          49 TE2/0/1/25 Clear
          50 TE2/0/1/26 Clear
          51 TE2/0/1/27 Clear
          52 TE2/0/1/28 Clear
          53 TE2/0/1/29 Clear
          54 TE2/0/1/30 Clear
          55 TE2/0/1/31 Clear

cat /proc/zaptel/3
Span 3: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"

          56 TE2/0/2/1 Clear
          57 TE2/0/2/2 Clear
          58 TE2/0/2/3 Clear
          59 TE2/0/2/4 Clear
          60 TE2/0/2/5 Clear
          61 TE2/0/2/6 Clear
          62 TE2/0/2/7 Clear
          63 TE2/0/2/8 Clear
          64 TE2/0/2/9 Clear
          65 TE2/0/2/10 Clear
          66 TE2/0/2/11 Clear
          67 TE2/0/2/12 Clear
          68 TE2/0/2/13 Clear
          69 TE2/0/2/14 Clear
          70 TE2/0/2/15 Clear
          71 TE2/0/2/16 HDLCFCS
          72 TE2/0/2/17 Clear
          73 TE2/0/2/18 Clear
          74 TE2/0/2/19 Clear
          75 TE2/0/2/20 Clear
          76 TE2/0/2/21 Clear
          77 TE2/0/2/22 Clear
          78 TE2/0/2/23 Clear
          79 TE2/0/2/24 Clear
          80 TE2/0/2/25 Clear
          81 TE2/0/2/26 Clear
          82 TE2/0/2/27 Clear
          83 TE2/0/2/28 Clear
          84 TE2/0/2/29 Clear
          85 TE2/0/2/30 Clear
          86 TE2/0/2/31 Clear

Before I do load the modules the leds are ligthing.
But after a ztcfg -v the led of the second span is off.

First I do  insmod wct4xxp and after ztcfg -vv.
The zaptel.conf file is like this:
#
#zaptel.conf
#

fxsks=1-24

span=1,0,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4

bchan=25-39,41-55
dchan=40

bchan=56-70,72-86
dchan=71

loadzone=nl
defaultzone=nl

(I have an TDM24P too, it works ok).

In this moment the led of the first span of the TE212P is in RED (if
no cable connected) or in GREEN (if a cable is conected), but the led
of the second span is off.

This is shown in a pri show span in the CLI (with no cable connected):

pri show span 2
 Primary D-channel: 40
Status: Provisioned, In Alarm, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

*CLI> pri show span 3
Primary D-channel: 71
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

If anybody knows what'? the problem I'll be very pleasent for your help.

Best Regards,

Benito

younss azzayani

2007-Mar-01 10:55 UTC

head link

[asterisk-users] Problem with TE212P

Hi,
if no cable is connected you'll get the red alarm
can you tell me the schema of your corssover cable.
try yo connect the 2 slot"s berween them and make internal calls(i 'm
not sure of this option but somemone called shimi has asked me if i
have 2 TE110P to test if my cable & my config are ok)
i hope this will be helpful, i still a newbie :)

Benito Camelas

2007-Mar-02 07:46 UTC

head link

[asterisk-users] Problem with TE212P

thanks Ioan

I've try this too but problem continues

I put :

span=1,1,0,ccs,hdb3,crc4
span=2,2,0,ccs,hdb3,crc4

span=1,1,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4

span=1,0,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4

In all this configurations the problem is the same
I'm desperate

Benito Camelas

2007-Mar-05 03:00 UTC

head link

[asterisk-users] Re: Problem with TE212P

Problem solved.

Chris Hozian from Digium related me the problem:


This problem is occurring because Asterisk expects to see the
d-channel on every 16th channel.  This is being offset because your
TDM2400P is being loaded first.

In order to fix this problem, make sure you that you are loading the
kernel module for the TE212P before the TDM2400P.  Then you will need
to reconfigure your /etc/zaptel.conf and /etc/asterisk/zapata.conf
accordingly.

Your zaptel.conf should contain the following.  Please keep in mind
that this is only a snippet of the configuration file.

--

zaptel.conf snippet:

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

span=2,0,0,ccs,hdb3,crc4
bchan=32-46,48-62
dchan=47

# the following is assuming your TDM2400P has all FXO modules
fxsks=63-86

--

You will need to modify your zapata.conf to reflect these channel range changes.

In addition, please verify that the jumpers on the TE212P are set for E1 mode.



Now it works ok.

Special thanks to Chris Hozian from Digium and Ioan Indreias from Modulo

Tzafrir Cohen

2007-Mar-05 05:00 UTC

head link

[asterisk-users] Re: Problem with TE212P

On Mon, Mar 05, 2007 at 11:00:36AM +0100, Benito Camelas
wrote:> Problem solved.
> 
> Chris Hozian from Digium related me the problem:
> 
> 
> This problem is occurring because Asterisk expects to see the
> d-channel on every 16th channel.  This is being offset because your
> TDM2400P is being loaded first.
HUH??

The dchannel needs to be no. 16 in the span, and unrelated to its
general channel number, right?
> 
> In order to fix this problem, make sure you that you are loading the
> kernel module for the TE212P before the TDM2400P.  Then you will need
> to reconfigure your /etc/zaptel.conf and /etc/asterisk/zapata.conf
> accordingly.
> 
> Your zaptel.conf should contain the following.  Please keep in mind
> that this is only a snippet of the configuration file.
> 
> --
> 
> zaptel.conf snippet:
> 
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15,17-31
> dchan=16
> 
> span=2,0,0,ccs,hdb3,crc4
> bchan=32-46,48-62
> dchan=47
> 
> # the following is assuming your TDM2400P has all FXO modules
> fxsks=63-86
> 
> --
> 
> You will need to modify your zapata.conf to reflect these channel range 
> changes.
> 
> In addition, please verify that the jumpers on the TE212P are set for E1 
> mode.
> 
> 
> 
> Now it works ok.
> 
> Special thanks to Chris Hozian from Digium and Ioan Indreias from Modulo
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir

C F

2007-Mar-05 06:22 UTC

head link

[asterisk-users] Problem with TE212P

I agree with Tzafrir on this one. i have a digium dual span card that
starts at channel nine because i have two TDM400s that load first and
i have had no problems whatsoever with the D channel.

On 3/5/07, Tzafrir Cohen <tzafrir.cohen@xorcom.com>
wrote:> On Mon, Mar 05, 2007 at 11:00:36AM +0100, Benito Camelas wrote:
> > Problem solved.
> >
> > Chris Hozian from Digium related me the problem:
> >
> >
> > This problem is occurring because Asterisk expects to see the
> > d-channel on every 16th channel.  This is being offset because your
> > TDM2400P is being loaded first.
>
> HUH??
>
> The dchannel needs to be no. 16 in the span, and unrelated to its
> general channel number, right?
>
> >
> > In order to fix this problem, make sure you that you are loading the
> > kernel module for the TE212P before the TDM2400P.  Then you will need
> > to reconfigure your /etc/zaptel.conf and /etc/asterisk/zapata.conf
> > accordingly.
> >
> > Your zaptel.conf should contain the following.  Please keep in mind
> > that this is only a snippet of the configuration file.
> >
> > --
> >
> > zaptel.conf snippet:
> >
> > span=1,1,0,ccs,hdb3,crc4
> > bchan=1-15,17-31
> > dchan=16
> >
> > span=2,0,0,ccs,hdb3,crc4
> > bchan=32-46,48-62
> > dchan=47
> >
> > # the following is assuming your TDM2400P has all FXO modules
> > fxsks=63-86
> >
> > --
> >
> > You will need to modify your zapata.conf to reflect these channel
range
> > changes.
> >
> > In addition, please verify that the jumpers on the TE212P are set for
E1
> > mode.
> >
> >
> >
> > Now it works ok.
> >
> > Special thanks to Chris Hozian from Digium and Ioan Indreias from
Modulo
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> --
>                Tzafrir Cohen
> icq#16849755                    jabber:tzafrir@jabber.org
> +972-50-7952406           mailto:tzafrir.cohen@xorcom.com
> http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Benito Camelas

2007-Mar-06 10:11 UTC

head link

[asterisk-users] Re:Problem with TE212P

Hello

This is another method, if you don want to change zaptel.conf (from
Chris Hozian of Digium)

I would like to clarify that there is another method which may be used
that does not require you to load the kernel modules in a different
order or to modify your zaptel.conf and zapata.conf file.

This can be done by specifying trunkgroup and spanmaps in your zapata.conf file.

[trunkgroups]
trunkgroup => 1,40
trunkgroup => 2,71
spanmap => 1,1
spanmap => 2,2

Best Reggards

Maybe Matching Threads

Search for more reasonably related threads

asterisk users - Feb 2007 - Problem with TE212P

[asterisk-users] Problem with TE212P

[asterisk-users] Fwd: Problem with TE212P

[asterisk-users] Problem with TE212P

[asterisk-users] Problem with TE212P

[asterisk-users] Re: Problem with TE212P

[asterisk-users] Re: Problem with TE212P

[asterisk-users] Problem with TE212P

[asterisk-users] Re:Problem with TE212P

Maybe Matching Threads