search for: tdm2400p

Hi i have a tdm2400p and installed asterisk 1.4.11 with zaptel 1.4.5 im having an error message when in running asterisk with the tdm card in. here's the error from the console of asterisk: [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:7489 mkintf: Unable to get span status: Inappropriate ioctl for device [Nov 18 10:...

Hi, I'd like to change 3 TDM400p with one TDM2400p to avoid echo (my intention is to use a TDM2400P echo cancel module). It TDM2400p working good with asterisk 1.2.1? Or I need to install a new asterisk version? TIA Giorgio Incantalupo

Hi, I have a box with Debian Sarge, Asterisk 1.2.1 (and zaptel 1.2.1) and a TDM2400P with echo canceller. I installed the card but no echo cancellation is being made...seems like the echo canceller module does not work, infact the software cancellation is working. My zapata.conf has echocancel = 128 and echocancelwhenbridged = yes but no echotraining parameter which gives a war...

...lcatel PBX: PRI PSTN <--> Asterisk <--> E1 cable <--> Alcatel PBX After successful deployment of VoIP phones, it's time to drop Alcatel PBX! I'd like to keep some of analog lines to support modem, fax and some older stuff. What's the best choice? A channel bank or a TDM2400P card? Can I use a TDM2400P board together with the actual TE410P? Thanks -- Domenico Viggiani

A big G'day to everybody on the Asterisk list. I am having a lot of trouble getting the TDM2400P card working in asterisk. I will give the important details below, please let me know if I am doing anything obvious or ideas for debugging this. SUMMARY: I get the right voltages on the line with the phone on or off the hook, but no dial tone, no ringing in or ringing out. INSTALLATION AND ZA...

How many TDM2400P cards can I safelly install in one PC? I'm loking for answers from whoever has a working scenario with * and a number of cards higher than one. Thx, Juan __________________________________________________________ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8

For example, how much power would a server with 3 of the TDM2400P fully loaded cards draw? We're trying to figure out what APC power we should have to achieve approx 30 minutes back-up time. Would appreciate any learnings or methods on calculating the power draw and determining the appropriate back-up device. Thank you. Melisa.

I am having issues with a TDM2400P. It appears when the ZAP channel dials out, it randomly chops the first digit off of the number. I have tried relaxdtmf=yes, turning up and down the txgain, turned off and on the echo cancellation, generated new zaptel (with updated spinlock.h)... I am at a loss. Can someone please offer some h...

Hi list, I have this problem: when someone is making a call, with asterisk and a TDM2400P connected to 8 fxo lines, the sound is good, but if three, for people are calling at the same time the sound got worse and worse. Using other voip cards the sound is much better even with all user calling at the same time. What can be, the problem? Someone else has having the same is...

Hi, I have a problem with TDM2400P card. The card is detected ok, I can make a call but only with pulse dialing (not tone dialing) without hear sounds from the headset. When I receive a call, I can to establish a communication, but without hear sounds from the headset. When I dial any phone key, I can hear dtmf tone. I'm using...

We just bougth a tdm2400p with all the modules for FXO, but we are having some troubles with the card, cause it aparently is stripping some digits from the dialed number, we tested the same server with a tdm400 and everything worked as expected. We?ve already added "w" before the dialed number with no results, is...

Hello, Thank you for your support of Digium and Asterisk. Yesterday, we identified a problem with the driver for the TDM2400P card when used with FXO port modules. The X400M was producing (and expecting) the audio signal at an abnormally high level, which negatively impacted the performance of the echo cancelers, both hardware and software. It also resulted in unusual audio artifacts when the actual signal was already a...

Hi, I cannot make my TDM2400P (with Echo Canceller module) detect faxes. I tried with a TDM400P and it worked at 80% (20% of faxes were lost). My test conf.files are: _zapata.conf_: context = inbound faxdetect = incoming language = it musiconhold = default signalling = fxs_ks callerid = "call_or_fax" channel =>...

...imple switch on 'Zap/52-1' -- Hungup 'Zap/52-1' And also the FXO port, It is connected with NEC line. I(Asterisk) can dial to the party(NEC), they can hear all my voice but I cannot hear anythings from them. How can I fix these problem? Are there any specific configuration for TDM2400P card? Thanks for your help. Thawat This is my configuration: Zaptel.conf loadzone = us defaultzone = us #Digium Wildcard TE110P T1/E1 Card span=1,1,0,ccs,hdb3,crc4,yellow bchan=1-15,17-31 dchan=16 #Wildcard TDM2400P Prototype Board fxsks=32-47 fxoks=52-55 Zapata.conf [channels] language=en cont...

Do the zaptel drivers need to be told >NOT< to use the software echo canceller when using a TDM2400p card with hardware echo canceller, or does the driver figure this out by itself? Thanks, Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061117/7dc52295/attachment.htm

Hi all, I'm confused, in digium website, it says: TDM2400P: It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines. 6 plus 6 is 12, how come it's 24? if I have 24 PSTN lines, i'll be needing 24 FXOs. Pls. elaborate. thanks. Lito -------------- next part -------------- An HTML attachment was scrubbed... URL: http://l...

Hello, We've purchased a 2nd Wildcard TDM2400P for our asterisk server. I've looked around but I can't find documentation on how to properly setup 2 or more telephony boards in asterisk. In particular, I want to ensure that the boards are assigned the same device channels on boot (for example, if you have two NICs in a Linux box and...

Hi, I am getting half channel audio on cisco 7960? Any idea why? Details below. Jerry This same phone has been working for MONTHS using a TDM2400p with no issues. Today we got a T1 installed coming into Box A with all incoming calls going to Box B (the TDM2400P box). The TDM2400 is no longer in use. All incoming and outgoing calls are done with the T1 and Box A and Box B use SIP between them (will change later). I have 6 polycom phones tha...

Hi Francois, Thank you for your interest. I tried the card alone so I don't think is an IRQ problem (anyway is there a way to be sure?) To be sincere, in all systems I saw (even working ones) there is an IRQ balance failed where Linux boots. The system is new, I tried different processors (P4 and Celeron) with SMP kernel and without. The card has the echo module, could not be

...e IP phone. Please light me up. it been many sleepless night by googling around trying to get the right answers. The digium card running on Intel 915G chipset. Below are my zaptel configurations. asterisk version: 1.2.9.1 Zaptel Version: 1.2.6 Echo Canceller: KB1 # Span 1: WCTDM/0 "Wildcard TDM2400P Prototype Board 1" fxsks=1 fxsks=2 fxsks=3 fxsks=4 fxsks=5 | | fxsks=21 fxsks=22 fxsks=23 fxsks=24 # Global data loadzone = us defaultzone = us [root#] lspci -vb 06:00.0 Ethernet controller: Digium, Inc. Wildcard TDM2400P (rev 11) Subsystem: Digium, Inc. Wildcard...