search for: te2

...anceller=mg2,1-23 # Span 2 span=2,2,0,esf,b8zs bchan=25-47 dchan=48 echocanceller=mg2,25-47 # Span 3 span=3,3,0,esf,b8zs bchan=49-71 dchan=72 echocanceller=mg2,49-71 # Span 4 span=4,4,0,esf,b8zs bchan=73-95 dchan=96 echocanceller=mg2,73-95 # Global loadzone = us defaultzone = us Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource 1 TE2/0/1/1 Clear (In use) (SWEC: MG2) (EC: VPM450M) 2 TE2/0/1/2 Clear (In use) (SWEC: MG2) (EC: VPM450M) 3 TE2/0/1/3 Clear (In use) (SWEC: MG2) 4 TE2/0/1/4 Clear (In use) (SWEC: MG2)...

Hello. I have a TE212 configured in E1 mode. This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured): cat /proc/zaptel/2 Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN 25 TE2/0/1/1 Clear 26 TE2/0/1/2 Clear 27 TE2/0/1/3 Clear...

...piix 16: 3378646209 3378695076 3378691115 3378697362 3378691116 3378706831 3378710635 3378702358 IO-APIC-fasteoi wct2xxp Can I positively conclude that my Dahdi PRI board IS NOT sharing IRQ (which is good) ? 2. What would you suggest reading the following output ? cat /proc/dahdi/2 Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) HDB3/CCS Timing slips: 175319 32 TE2/0/2/1 Clear (In use) (EC: VPMOCT064 - INACTIVE) 33 TE2/0/2/2 Clear (In use) (EC: VPMOCT064 - INACTIVE) 34 TE2/0/2/3 Clear (In use) (EC: VPMOCT064 - INACTIVE) 35 TE2/0/2/4 Clear (In u...

Hello, I'm running Asterisk@home 2.5 asterisk 1.2.4 zapatel 1.2.2 libpri 1.2.2 on a Dell Poweredge 2850 (1 CPU) with a TE210P I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able to receive inbound calls on all channels and can only make outbound calls on channels 25-48. Attempting to make an outbound call on channels 1-23 results in congestion. --------------------------- [/etc/zaptel.co...

...urite distro and it is still suggested here http://www.voip-info.org/wiki-Asterisk+Linux+Slackware) , so, i've installed the last 10.2 release, and i've recompiled the 2.6.15.4 kernel. then i've downloaded asterisk1.2.4 and zaptel1.2.4 i load module zaptel and wct2xxp (i've got a TE205P) this is my lsmod: root@asterisk:/data/programmi/asterisk1.2.4/asterisk-1.2.4# lsmod Module Size Used by wct4xxp 106048 - zaptel 222948 - and this are the channel in root@asterisk:~# cat /proc/zaptel/1 Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Sp...

...ed Allarm. I checked the dahdi and I found that I have to reinstall dahdi again and I did. But still not becoming UP. The output of the cat /proc/dahdi/1 is following (I am afraid from the IRQ misses: 1, so if it is a problem what is the solution)? [root at CC asterisk]# cat /proc/dahdi/1 Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED IRQ misses: 1 1 TE2/0/1/1 Clear (In use) RED(SWEC: MG2) 2 TE2/0/1/2 Clear (In use) RED(SWEC: MG2) 3 TE2/0/1/3 Clear (In use) RED(SWEC: MG2) 4 TE2/0/1/4 Clear (In use) RED(SWEC:...

...n I run asterisk I get red alarms on all the channels. Thanks for any help. I have sent 2 days on this and this is what I did: 1. I installed the card. 2. libpri-1.4.11 - dahdi-linux-complete-2.3.0+2.3.0 - dahdi-tools-2.3.0 3. dahdi_hardware: pci:0000:01:06.0 wct4xxp+ d161:0210 Wildcard TE210P 4. cat /proc/dahdi/1 :cat /proc/dahdi/1 Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" B8ZS/ESF BLUE RED 1 TE2/0/1/1 Clear RED 2 TE2/0/1/2 Clear RED 3 TE2/0/1/3 Clear RED 4 TE2/0/1/4 Clear RED 5 TE2/0/1/5 Clear RED 6 TE2/0/1/6 Clear RED 7...

Hello I'd like to configure Asterisk so that... 1. I ring it from my cellphone with CID number displayed, just to notify Asterisk that I wish to make a call 2. Asterisk waits until I hang up, calls me back, and prompts me for the number I wish to call 3. Asterisk puts me on hold through Flash(), which is apparently the equivalent of hitting the R key on European handsets 4. Asterisk calls the

Hi, I've searched and searched on the possible problems. If anyone can help me that would be great. Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF CRC4 error count: 4750 E-bit error count: 5023 Timing slips: 72 1 TE2/0/1/1 Clear (In use) (SWEC: MG2) 2 TE2/0/1/2 Clear (In use) (SWEC: MG2) 3 TE2/0/1/3 Clear (In use) (SWEC: MG2)...

...Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order span = 1,1,0,esf,b8zs # fxsks=1-24 bchan = 1-23 dchan = 24 # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" # ??: 1 TE2/0/1/1 FXSKS # ??: 2 TE2/0/1/2 # ??: 3 TE2/0/1/3 # ??: 4 TE2/0/1/4 # ??: 5 TE2/0/1/5 # ??: 6 TE2/0/1/6 # ??: 7 TE2/0/1/7 # ??: 8 TE2/0/1/8 # ??: 9 TE2/0/1/9 # ??: 10 TE2/0/1/10 # ??: 11 TE2/0/1/11 # ??: 12 TE2/0/1/12 # ??: 13 TE2/0/1...

I have a server with an asterisk ss7 link connected to a Siemens working well for over a year. A few days ago I started having problems with signaling. I found the following logs in / var / log / messages Sep 12 11:49:25 call3 kernel: [1018427.030959] dahdi: Master changed to TE2/0/2 Sep 12 11:49:25 call3 kernel: [1018427.120740] dahdi: Master changed to TE2/0/1 Sep 12 11:49:26 call3 kernel: [1018427.789173] dahdi: Master changed to TE2/0/2 Sep 12 11:49:26 call3 kernel: [1018427.884828] dahdi: Master changed to TE2/0/1 Sep 12 11:49:29 call3 kernel: [1018431.209621] dahdi: M...

...t; 256; ++i) { - pow_tab[i] = (u1byte)p; log_tab[p] = (u1byte)i; +#define FULL_UNROLL - p = p ^ (p << 1) ^ (p & 0x80 ? 0x01b : 0); - } - - log_tab[1] = 0; p = 1; - - for(i = 0; i < 10; ++i) { - rco_tab[i] = p; +/* +Te0[x] = S [x].[02, 01, 01, 03]; +Te1[x] = S [x].[03, 02, 01, 01]; +Te2[x] = S [x].[01, 03, 02, 01]; +Te3[x] = S [x].[01, 01, 03, 02]; +Te4[x] = S [x].[01, 01, 01, 01]; + +Td0[x] = Si[x].[0e, 09, 0d, 0b]; +Td1[x] = Si[x].[0b, 0e, 09, 0d]; +Td2[x] = Si[x].[0d, 0b, 0e, 09]; +Td3[x] = Si[x].[09, 0d, 0b, 0e]; +Td4[x] = Si[x].[01, 01, 01, 01]; +*/ - p = (p << 1) ^ (...

...cost and reliable PCI <--> T1 cards? - Greg Scott -----Original Message----- From: lartc-bounces@mailman.ds9a.nl [mailto:lartc-bounces@mailman.ds9a.nl] On Behalf Of Brian Hammerstein Sent: Monday, January 16, 2006 1:26 PM To: lartc@mailman.ds9a.nl Subject: [LARTC] FS: Cyclades PC300/TE2 Dual T1 Interface PCI Card For LinuxPC! Hi. I have a Cyclades PC300/TE2 card that turns a Linux PC into a Dual T1 interface router. It is well made and high performance. I used it for a few years. It includes two T1 cables. Cyclades has gotten out of this business but the Linux kernel develope...

Hi, I am having problems with an Asterisk with a Digium TE205P card. The issue is that the Ring Back Tone is noisy. I am making modem's calls and this noise influences on the initial negotiation protocol, so modems have to recall. My configuration is: Asterisk version: Asterisk 1.4.21.2 Linux version: CentOS release 5.2 (Final) Card: Digium TE205P...

Hi. I have a Cyclades PC300/TE2 card that turns a Linux PC into a Dual T1 interface router. It is well made and high performance. I used it for a few years. It includes two T1 cables. Cyclades has gotten out of this business but the Linux kernel developer community supports this card so no additional driver is needed. It cost m...

Hello list i have an issue with my dahdi_channels.conf in span 1 when i use it like below i can do my outband calls without issue ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) group=0,11 context=from-pstn switchtype = euroisdn signalling = pri_cpe channel => 17-31 context = default group = 63 but when i add in channel 1-15 like: channel => 1-15,17-31 i receive all the time this message chan_dahdi.c:9438 pri_fi...

Hello all. I have an NEC PBX connected via a TE210p E1 line to an asterisk 1.6 box. NEC -> E1 -> TE210P:1 -> * -> TE210P:2 -> E1 -> Telco Incomming calls from the telco to the asterisk box to the NEC work fine with indials and everything. Works sweet. Outbound from the NEC to the Asterisk box fail. Giving an long dial tone...

...e. But still no luck. Any hints would be appreciated. In particular if someone can suggest some documentation on what _could_ cause a (cause 0 - Unknown) then I can investigate those. Some details below: geriatrix ~ # dahdi_scan [1] active=yes alarms=OK description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE210P (4th Gen) location=Board ID Switch 0 basechan=1 totchans=24 irq=48 type=digital-T1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [2] active=yes alarms=RED description=T2XXP (PCI) Card 0...

Hello! I am trying to configure my digium TE220 dual-span pci express card with Dahdi. I seemed to have managed to set up the card with the Dahdi kernel, as demonstrated by executing dahdi_scan: [1] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board...

Hi. My configuration is Elastix 1.5.2-2 (asterisk 1.4.24, libpri-1.4.3-5, dahdi-2.1.0.4-7 ) and OpenVox d210e connected to telco provider (Euro ISDN). Here is my /etc/dahdi/system.conf: # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS ClockSource span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=oslec,1-15,17-31 # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 RED span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=...